Product filters Product filters

Design

$40.00
Earthquake and Tsunami, Building Design, Pre-Disaster, Structural - General
The ATC Design Guide 1 report, Minimizing Floor Vibration , was developed with funding from ATC's Henry J. Degenkolb Memorial Endowment Fund. (Published,...
In stock
+

Minimum quantity for "Minimizing Floor Vibration" is 1.


$36.00
Earthquake and Tsunami, Building Design, Pre-Disaster, Structural
The ATC-7 report, Guidelines for the Design of Horizontal Wood Diaphragms , was published under a grant from the National Science Foundation (NSF)....
In stock
+

Minimum quantity for "Guidelines for the Design of Horizontal Wood Diaphragms" is 1.


$10.00
Technical Brief, Structural, Pre-Disaster, Earthquake and Tsunami, Building Design
**FREE FOR DOWNLOAD** An electronic copy of this report is available in the "Downloadable" tab. The NEHRP Seismic Design Technical Brief No. 12:...
In stock
+

Minimum quantity for "NEHRP Seismic Design Technical Brief No. 12: Seismic Design of Cold-Formed Steel Lateral Load-Resisting Systems, A Guide for Practicing Engineers" is 1.


$37.50
Earthquake and Tsunami, Building Design, Pre-Disaster, Structural, Steel Buildings
The SAC/BD-97/02, Protocol for Fabrication, Inspection, Testing and Documentation of Beam-Column Connection Tests and Other Experimental Specimens , was...
In stock
+

Minimum quantity for "Protocol for Fabrication, Inspection, Testing and Documentation of Beam-Column Connection Tests and Other Experimental Specimens" is 1.


$25.00
Earthquake and Tsunami, Building Design, Pre-Disaster, Structural, Wood-Frame Buildings
**FREE FOR DOWNLOAD** An electronic copy of this report is available in the "Downloadable" tab. FEMA P-50 Reference Materials can be found here . The...
In stock
+

Minimum quantity for "FEMA P-50, Simplified Seismic Assessment of Detached, Single-Family, Wood-Frame Dwellings" is 1.


$25.00
Earthquake and Tsunami, Building Design, Pre-Disaster, Structural, Concrete Buildings

This report documents identification of critical deficiencies, refinement of the list of common deficiencies, and development of collapse mitigation strategies for older reinforced concrete buildings.

In stock
+

Minimum quantity for "Review of Past Performance and Further Development of Modeling Techniques for Collapse Assessment of Existing Reinforced Concrete Buildings" is 1.


$25.00
Structural, Research Reports, Pre-Disaster, Earthquake and Tsunami, Building Design

This report outlines a comprehensive, long-range Nonlinear Analysis Research and Development Program.

In stock
+

Minimum quantity for "Nonlinear Analysis Research and Development Program for Performance-Based Seismic Engineering" is 1.


$50.00
Pre-Disaster, Proceedings, Building Design, Earthquake and Tsunami, Nonstructural, Building Evaluation, Structural Evaluation
The ATC-51-2 report, Recommended U.S.-Italy Collaborative Guidelines for Bracing and Anchoring Nonstructural Components in Italian Hospitals , was...
In stock
+

Minimum quantity for "Recommended U.S.-Italy Collaborative Guidelines for Bracing and Anchoring Nonstructural Components in Italian Hospitals" is 1.


$10.00
Earthquake and Tsunami, Building Design, Pre-Disaster, Structural, Technical Brief
**FREE FOR DOWNLOAD** An electronic copy of this report is available at the NEHRP web site . The NEHRP Seismic Design Technical Brief No. 4:...
In stock
+

Minimum quantity for "NEHRP Seismic Design Technical Brief No. 4: Nonlinear Structural Analysis for Seismic Design, A Guide for Practicing Engineers" is 1.


$60.00
Earthquake and Tsunami, Building Design, Steel Buildings, Pre-Disaster, Structural
The SAC/BD-00/21, Cyclic Testing of Bolted Moment End-Plate Connections , was funded by the Federal Emergency Management Agency (FEMA) and the California...
In stock
+

Minimum quantity for "Cyclic Testing of Bolted Moment End-Plate Connections" is 1.


$25.00
Earthquake and Tsunami, Building Design, Pre-Disaster, Structural, Wood-Frame Buildings
The ATC-50-1 (FEMA P-50-1) report, Seismic Retrofit Guidelines for Detached, Single-Family, Wood-Frame Dwellings , was funded by the Federal Emergency...
In stock
+

Minimum quantity for "FEMA P-50-1, Seismic Retrofit Guidelines for Detached, Single-Family, Wood-Frame Dwellings" is 1.


$35.00
Earthquake and Tsunami, Building Design, Pre-Disaster, Structural - General
The ATC-72-1 report, Modeling and Acceptance Criteria for Seismic Design and Analysis of Tall Buildings , was developed under an agreement with the Pacific...
In stock
+

Minimum quantity for "Modeling and Acceptance Criteria for Seismic Design and Analysis of Tall Buildings" is 1.


$10.00
Earthquake and Tsunami, Building Design, Pre-Disaster, Structural, Technical Brief
The NEHRP Seismic Design Technical Brief No. 9:  Seismic Design of Special Reinforced Masonry Shear Walls , A Guide for Practicing Engineers was...
In stock
+

Minimum quantity for "NEHRP Seismic Design Technical Brief No. 9: Seismic Design of Special Reinforced Masonry Shear Walls" is 1.


$20.00
Earthquake and Tsunami, Building Design, Pre-Disaster, Structural, Masonry
The ATC-5 report, Guidelines for Seismic Design and Construction of Single-Story Masonry Dwellings in Seismic Zone 2 , was developed under a contract with...
In stock
+

Minimum quantity for "Guidelines for Seismic Design and Construction of Single-Story Masonry Dwellings in Seismic Zone 2" is 1.


$25.00
Structural, Research Reports, Building Design, Pre-Disaster, Earthquake and Tsunami
The ATC-24 report, Guidelines for Seismic Testing of Components of Steel Structures , was jointly funded by the American Iron and Steel Institute (AISI),...
In stock
+

Minimum quantity for "Guidelines for Seismic Testing of Components of Steel Structures" is 1.


$85.00
Pre-Disaster, Steel Buildings, Structural, Earthquake and Tsunami, Building Design
The SAC-96-01 report, Experimental Investigations of Beam-Column Subassemblages, Part 1 and 2 , was funded by the Federal Emergency Management Agency...
In stock
+

Minimum quantity for "Experimental Investigations of Beam-Column Subassemblages, Part 1 and 2" is 1.


$35.00
Pre-Disaster, Building Design, Earthquake and Tsunami, Steel Buildings, Structural
The SAC/BD-00/10, Loading Histories for Seismic Performance Testing of SMRF Components and Assemblies , was funded by the Federal Emergency Management...
In stock
+

Minimum quantity for "Loading Histories for Seismic Performance Testing of SMRF Components and Assemblies" is 1.


$55.00
Earthquake and Tsunami, Building Design, Pre-Disaster, Steel Buildings, Structural
The SAC/BD-00/17, Behavior and Design of Radius Cut Reduced Beam Section Connections , was funded by the Federal Emergency Management Agency (FEMA) and the...
In stock
+

Minimum quantity for "Behavior and Design of Radius Cut Reduced Beam Section Connections" is 1.


$300.00
Earthquake and Tsunami, Building Design, Pre-Disaster, Structural, Steel Buildings
The SAC_CD01-03, SAC Steel Project, Background Documents , is a three-zip USB set contains the following 66 background documents, SAC/BD-96/01 through...
In stock
+

Minimum quantity for "SAC Steel Project, Background Documents" is 1.


$25.00
Earthquake and Tsunami, Building Design, Pre-Disaster, Structural, Concrete Buildings

This report presents documentation of reinforced concrete wall failure modes and observed damage following the 2010 Maule, Chile earthquake and recommendations from studies evaluating critical issues in the design of reinforced concrete walls.

In stock
+

Minimum quantity for "Recommendations for Seismic Design of Reinforced Concrete Wall Buildings Based on Studies of the 2010 Maule, Chile Earthquake" is 1.


$25.00
Earthquake and Tsunami, Building Design, Pre-Disaster, Structural, Research Reports

This report presents a comparison of seismic design criteria and practices embodied in U.S. and Chilean building codes in the period immediately preceding the 2010 Maule earthquake.

In stock
+

Minimum quantity for "Comparison of U.S. and Chilean Building Code Requirements and Seismic Design Practice 1985–2010" is 1.


$10.00
Technical Brief, Structural, Pre-Disaster, Earthquake and Tsunami, Building Design
The NEHRP Seismic Design Technical Brief No. 1: Seismic Design of Reinforced Concrete Special Moment Frames, A Guide for Practicing Engineers , Second...
In stock
+

Minimum quantity for "NEHRP Seismic Design Technical Brief No. 1: Seismic Design of Reinforced Concrete Special Moment Frames, A Guide for Practicing Engineers, Second Edition" is 1.


$50.00
Task Order 39 (ATC-120 Project), Seismic Analysis, Design, and Installation of Nonstructural Components and Systems – Background and...
In stock
+

Minimum quantity for "Seismic Analysis, Design, and Installation of Nonstructural Components and Systems – Background and Recommendations for Future Work" is 1.


$10.00
The NEHRP Seismic Design Technical Brief No. 13: Seismic Design of Precast Concrete Diaphragms , A Guide for Practicing Engineers , was produced under...
In stock
+

$60.00
Building Design, Earthquake and Tsunami, Pre-Disaster, Structural
The ATC-3-06 report, Tentative Provisions for the Development of Seismic Regulations for Buildings , was funded by the National Science Foundation (NSF)...
In stock
+

Minimum quantity for "Tentative Provisions for the Development of Seismic Regulations for Buildings" is 1.


$20.00
Earthquake and Tsunami, Building Design, Pre-Disaster, Structural, Wood-Frame Buildings
The ATC-4-1 report, The Home Builders Guide for Earthquake Design, was published under a contract with the Department of Housing and Urban Development...
In stock
+

Minimum quantity for "The Home Builders Guide for Earthquake Design" is 1.


$30.00
Earthquake and Tsunami, Building Design, Pre-Disaster, Structural - General
The ATC-19 report, Structural Response Modification Factors , was funded by the National Science Foundation (NSF) and the National Center for Earthquake...
In stock
+

Minimum quantity for "Structural Response Modification Factors" is 1.


$45.00
Proceedings, Pre-Disaster, Nonstructural, Earthquake and Tsunami, Building Design
The ATC-29 report, Proceedings of a Seminar and Workshop on Seismic Design and Performance of Equipment and Nonstructural Elements in Buildings and...
In stock
+

Minimum quantity for "Proceedings of a Seminar and Workshop on Seismic Design and Performance of Equipment and Nonstructural Elements in Buildings and Industrial Structures" is 1.


$30.00
Building Design, Earthquake and Tsunami, Pre-Disaster
The ATC-34 report, A Critical Review of Current Approaches to Earthquake Resistant Design, was developed under a grant from National Center for Earthquake...
In stock
+

Minimum quantity for "A Critical Review of Current Approaches to Earthquake Resistant Design" is 1.


$25.00
Structural, Steel Buildings, Pre-Disaster, Earthquake and Tsunami, Building Design
The SAC-95-01 report, Steel Moment-Frame Connection Advisory No. 3 , was funded by the Federal Emergency Management Agency (FEMA) and the California Office...
In stock
+

Minimum quantity for "Steel Moment-Frame Connection Advisory No. 3" is 1.


$48.00
Building Design, Earthquake and Tsunami, Pre-Disaster, Steel Buildings, Structural
The SAC-95-07 report, Case Studies of Steel Moment Frame Building Performance in the Northridge Earthquake of January 17, 1994,  was funded by the...
In stock
+

Minimum quantity for "Case Studies of Steel Moment Frame Building Performance in the Northridge Earthquake of January 17, 1994" is 1.


$25.00
Structural, Steel Buildings, Pre-Disaster, Earthquake and Tsunami, Building Design
The SAC-96-02 report, Connection Test Summaries (FEMA 289), was funded by the Federal Emergency Management Agency (FEMA) and the California Office of...
In stock
+

Minimum quantity for "FEMA 289, Connection Test Summaries" is 1.


$36.00
Structural, Steel Buildings, Pre-Disaster, Earthquake and Tsunami, Building Design
The SAC-99-01 report, Interim Guidelines Advisory No. 2 Supplement to FEMA-267 Interim Guidelines , is now available as FEMA 267B Report, superseding...
In stock
+

Minimum quantity for "FEMA 267B, Interim Guidelines Advisory No. 2 Supplement to FEMA-267 Interim Guidelines" is 1.


$45.00
Structural, Steel Buildings, Pre-Disaster, Earthquake and Tsunami, Building Design
The SAC/BD-00/05, Bolted Flange Plate Connections , was funded by the Federal Emergency Management Agency (FEMA) and the California Office of Emergency...
In stock
+

Minimum quantity for "Bolted Flange Plate Connections" is 1.


$37.50
Pre-Disaster, Earthquake and Tsunami, Building Design, Steel Buildings, Structural
The SAC/BD-00/13, Preliminary Evaluation of Heat Affected Zone Toughness in Structural Shapes used in the Construction of Seismic Moment Frames , was...
In stock
+

Minimum quantity for "Preliminary Evaluation of Heat Affected Zone Toughness in Structural Shapes used in the Construction of Seismic Moment Frames" is 1.


$35.00
Structural, Steel Buildings, Pre-Disaster, Earthquake and Tsunami, Building Design
The SAC/BD-97/01, Through-Thickness Properties of Structural Steels , was funded by the Federal Emergency Management Agency (FEMA) and the California...
In stock
+

Minimum quantity for "Through-Thickness Properties of Structural Steels" is 1.


$35.00
Earthquake and Tsunami, Pre-Disaster, Building Design, Steel Buildings, Structural
The SAC/BD-97/04, Development of Ground Motion Time Histories for Phase 2 of the FEMA/SAC Steel Project , was funded by the Federal Emergency Management...
In stock
+

Minimum quantity for "Development of Ground Motion Time Histories for Phase 2 of the FEMA/SAC Steel Project" is 1.


$60.00
Pre-Disaster, Earthquake and Tsunami, Building Design, Steel Buildings, Structural
The SAC/BD-99/06, Prediction of Seismic Demands for SMRFs with Ductile Connections and Elements , was funded by the Federal Emergency Management Agency...
In stock
+

Minimum quantity for "Prediction of Seismic Demands for SMRFs with Ductile Connections and Elements" is 1.


$40.00
Earthquake and Tsunami, Building Design, Pre-Disaster, Structural, Steel Buildings
The SAC/BD-99/17, Effects of Partially Restrained Connection Stiffness and Strength on Frame Seismic Performance , was funded by the Federal Emergency...
In stock
+

Minimum quantity for "Effects of Partially Restrained Connection Stiffness and Strength on Frame Seismic Performance" is 1.


$37.50
Earthquake and Tsunami, Building Design, Pre-Disaster, Structural, Steel Buildings
The SAC/BD-99/24, Weld Acceptance Criteria for Seismically-Loaded Welded Connection s , was funded by the Federal Emergency Management Agency (FEMA) and...
In stock
+

Minimum quantity for "Weld Acceptance Criteria for Seismically-Loaded Welded Connections" is 1.


$30.00
Nonstructural, Pre-Disaster, Earthquake and Tsunami, Building Design
The ATC-74 report, Collaborative Recommended Requirements for Automatic Natural Gas Shutoff Valves in Italy, was funded by the Department of Civil...
In stock
+

Minimum quantity for "Collaborative Recommended Requirements for Automatic Natural Gas Shutoff Valves in Italy" is 1.


$25.00
Building Design, Earthquake and Tsunami, Pre-Disaster, Structural - General, Structural
The ATC-63 (FEMA P-695) report, Quantification of Building Seismic Performance Factors , was developed under a cooperative agreement between the Federal...

Minimum quantity for "FEMA P-695, Quantification of Building Seismic Performance Factors" is 1.


$10.00
Earthquake and Tsunami, Building Design, Pre-Disaster, Structural, Technical Brief
The NEHRP Seismic Design Technical Brief No. 2: Seismic Design of Steel Special Moment Frames, A Guide for Practicing Engineers was produced under...
In stock
+

Minimum quantity for "NEHRP Seismic Design Technical Brief No. 2: Seismic Design of Steel Special Moment Frames, A Guide for Practicing Engineers" is 1.


$10.00
Earthquake and Tsunami, Building Design, Pre-Disaster, Structural, Technical Brief
The NEHRP Seismic Design Technical Brief No. 1: Seismic Design of Reinforced Concrete Special Moment Frames, A Guide for Practicing Engineers , was...
In stock
+

Minimum quantity for "NEHRP Seismic Design Technical Brief No. 1: Seismic Design of Reinforced Concrete Special Moment Frames, A Guide for Practicing Engineers" is 1.


$25.00
Earthquake and Tsunami, Building Design, Pre-Disaster, Structural, Research Reports
The Applicability of Nonlinear Multiple-Degree-of-Freedom Modeling for Design report was produced under contract to the National Institute of Standards...
In stock
+

Minimum quantity for "Applicability of Nonlinear Multiple-Degree-of-Freedom Modeling for Design" is 1.


$45.00
Earthquake and Tsunami, Building Design, Structural - General, Pre-Disaster
The ATC-75 Report, Improvements to BIM Structural Software Interoperability , was developed under a Research Grant from the Charles Pankow Foundation....
In stock
+

Minimum quantity for "Improvements to BIM Structural Software Interoperability" is 1.


$10.00
Building Design, Pre-Disaster, Earthquake and Tsunami, Structural, Technical Brief
The NEHRP Seismic Design Technical Brief No. 10: Seismic Design of Wood Light-Frame Structural Diaphragm Systems , A Guide for Practicing Engineers was...
In stock
+

Minimum quantity for "NEHRP Seismic Design Technical Brief No. 10: Seismic Design of Wood Light-Frame Structural Diaphragm Systems, A Guide for Practicing Engineers" is 1.


$25.00
Pre-Disaster, Earthquake and Tsunami, Building Design, Proceedings, Research Reports, Structural
The ATC-58-1 report, Proceedings of FEMA-Sponsored Workshop on Communicating Earthquake Risk , was funded by Federal Emergency Management Agency (FEMA)....
In stock
+

Minimum quantity for "Proceedings of FEMA-Sponsored Workshop on Communicating Earthquake Risk" is 1.