Product filters Product filters

Steel Buildings

$60.00
Earthquake and Tsunami, Building Design, Pre-Disaster, Structural, Steel Buildings
The SAC/BD-00/21,  Cyclic Testing of Bolted Moment End-Plate Connections , was funded by the Federal Emergency Management Agency (FEMA) and the...
In stock
+

Minimum quantity for "Cyclic Testing of Bolted Moment End-Plate Connections" is 1.


$37.50
Earthquake and Tsunami, Building Design, Pre-Disaster, Structural, Steel Buildings
The SAC/BD-97/02,  Protocol for Fabrication, Inspection, Testing and Documentation of Beam-Column Connection Tests and Other Experimental Specimens ,...
In stock
+

Minimum quantity for "Protocol for Fabrication, Inspection, Testing and Documentation of Beam-Column Connection Tests and Other Experimental Specimens" is 1.


$300.00
Building Design, Earthquake and Tsunami, Pre-Disaster, Steel Buildings, Structural
The SAC_CD01-03, SAC Steel Project, Background Documents , is a three-disk CD set contains the following 66 background documents, SAC/BD-96/01 through...
In stock
+

Minimum quantity for "SAC Steel Project, Background Documents" is 1.


$85.00
Pre-Disaster, Steel Buildings, Structural, Earthquake and Tsunami, Building Design
The SAC-96-01 report, Experimental Investigations of Beam-Column Subassemblages, Part 1 and 2 , was funded by the Federal Emergency Management Agency...
In stock
+

Minimum quantity for "Experimental Investigations of Beam-Column Subassemblages, Part 1 and 2" is 1.


$25.00
Structural, Steel Buildings, Building Design, Earthquake and Tsunami, Pre-Disaster
The SAC-96-02 report, Connection Test Summaries (FEMA 289), was funded by the Federal Emergency Management Agency (FEMA) and the California Office of...
In stock
+

Minimum quantity for "Connection Test Summaries (FEMA 289)" is 1.


$37.50
Earthquake and Tsunami, Building Design, Pre-Disaster, Structural, Steel Buildings
The SAC/BD-00/13, Preliminary Evaluation of Heat Affected Zone Toughness in Structural Shapes used in the Construction of Seismic Moment Frames , was...
In stock
+

Minimum quantity for "Preliminary Evaluation of Heat Affected Zone Toughness in Structural Shapes used in the Construction of Seismic Moment Frames" is 1.


$55.00
Earthquake and Tsunami, Building Design, Pre-Disaster, Structural, Steel Buildings
The SAC/BD-00/17, Behavior and Design of Radius Cut Reduced Beam Section Connections , was funded by the Federal Emergency Management Agency (FEMA) and the...
In stock
+

Minimum quantity for "Behavior and Design of Radius Cut Reduced Beam Section Connections" is 1.


$35.00
Earthquake and Tsunami, Building Design, Pre-Disaster, Structural, Steel Buildings
The SAC/BD-97/01,   Through-Thickness Properties of Structural Steels , was funded by the Federal Emergency Management Agency (FEMA) and the...
In stock
+

Minimum quantity for "Through-Thickness Properties of Structural Steels" is 1.


$25.00
Earthquake and Tsunami, Building Design, Pre-Disaster, Structural, Steel Buildings
The ATC-41a (FEMA 350) report,  Recommended Seismic Design Criteria for New Steel Moment-Frame Buildings , was funded by the Federal Emergency...
In stock
+

Minimum quantity for "Recommended Seismic Design Criteria for New Steel Moment-Frame Buildings" is 1.


$25.00
Earthquake and Tsunami, Building Design, Pre-Disaster, Structural, Steel Buildings
The ATC-41b (FEMA 351) report, Recommended Seismic Evaluation and Upgrade Criteria for Existing Welded Steel Moment-Frame Buildings , was funded by the...
In stock
+

Minimum quantity for "Recommended Seismic Evaluation and Upgrade Criteria for Existing Welded Steel Moment-Frame Buildings" is 1.


$25.00
Earthquake and Tsunami, Building Design, Pre-Disaster, Structural, Steel Buildings
The ATC-41c (FEMA 352) report, Recommended Postearthquake Evaluation and Repair Criteria for Welded Steel Moment-Frame Buildings , was funded by the...
In stock
+

Minimum quantity for "Recommended Postearthquake Evaluation and Repair Criteria for Welded Steel Moment-Frame Buildings" is 1.


$25.00
Earthquake and Tsunami, Building Design, Pre-Disaster, Structural, Steel Buildings
The ATC-41d (FEMA 353) report, Recommended Specifications and Quality Assurance Guidelines for Steel Moment-Frame Construction for Seismic...
In stock
+

Minimum quantity for "Recommended Specifications and Quality Assurance Guidelines for Steel Moment-Frame Construction for Seismic Applications" is 1.