{"title":"Publications","description":"","products":[{"product_id":"an-evaluation-of-a-response-spectrum-approach-to-seismic-design-of-buildings","title":"An Evaluation of a Response Spectrum Approach to Seismic Design of Buildings","description":"\u003cp\u003eThe ATC-2 report, \u003cem\u003eAn Evaluation of a Response Spectrum Approach to Seismic Design of Buildings\u003c\/em\u003e, was funded by the National Science Foundation (NSF) and the National Bureau of Standards (NBS) and was conducted as part of the Cooperative Federal Program in Building Practices for Disaster Mitigation. (Published 1974, 270 Pages)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eABSTRACT: \u003c\/strong\u003eThis study evaluates the applicability and cost of the response spectrum approach to seismic analysis and design that was proposed by various segments of the engineering profession. Specific building designs, design procedures and parameter values were evaluated for future application. Eleven existing buildings of varying dimensions were redesigned according to the procedures.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eClick \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/ATC-2_Cover_TitlePage_TOC_LOF_LOT.pdf?v=1783550158\" target=\"_blank\"\u003ehere\u003c\/a\u003e to view the Title Page, Preface, and Contents.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Applied Technology Council","offers":[{"title":"Default Title","offer_id":48162039824596,"sku":"ATC-2","price":36.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/atc02cover_cac3f159-0d59-4754-b497-95ff758659f6.jpg?v=1782184094"},{"product_id":"postearthquake-safety-evaluation-of-buildings-training-powerpoint-presentation","title":"Postearthquake Safety Evaluation of Buildings Training PowerPoint Presentation","description":"\u003cp\u003eThe ATC-20 \u003cem\u003ePostearthquake Safety Evaluation of Buildings \u003c\/em\u003eTraining PowerPoint Presentation\u003cem\u003e \u003c\/em\u003ewas developed by ATC.  It was designed to replace the FEMA-funded 1993 version of the ATC-20-T Report, \u003cem\u003ePostearthquake Safety Evaluation of Buildings Training Manual \u003c\/em\u003e(that included 160 35-mm slides, with speakers notes). (Published 2002, 230 PowerPoint slides with speaker's notes)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eABSTRACT:\u003c\/strong\u003e This Training PowerPoint presentation is intended to facilitate the presentation of the contents of the ATC-20 and ATC-20-2 reports in a 4-hour training seminar. The presentation contains 230 slides of photographs, schematic drawings and textual information, with speakers notes. Topics covered include a posting system, evaluation procedures, structural basics, wood frame, masonry, concrete, and steel frame structures, nonstructural elements, geotechnical hazards, hazardous materials, and field safety. (Note: the presentation has not yet been updated to include information on the second edition of the ATC-20-1 \u003cem\u003eField Manual\u003c\/em\u003e).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eClick \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/ATC-20-T.pdf?v=1783550291\" target=\"_blank\"\u003ehere\u003c\/a\u003e to view the Title Page, Preface, and Contents.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e20% Discount on Orders of 5 or More!\u003c\/strong\u003e\u003c\/p\u003e","brand":"Applied Technology Council","offers":[{"title":"Default Title","offer_id":48162039890132,"sku":"ATC-20-T","price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/ATC20-T_aa5b2e1b-415e-4d88-8e05-c85a9209311d.jpg?v=1782184096"},{"product_id":"redesign-of-three-multistory-buildings-a-comparison-using-atc-3-06-and-1982-ubc-design-provisions","title":"Redesign of Three Multistory Buildings: A Comparison Using ATC-3-06 and 1982 UBC Design Provisions","description":"\u003cp\u003eThe ATC-3-4 report, \u003cem\u003eRedesign of Three Multistory Buildings: A Comparison Using ATC-3-06 and 1982 Uniform Building Code Design Provisions\u003c\/em\u003e, was published under a grant from the National Science Foundation (NSF). (Published 1984, 112 pages)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eABSTRACT: \u003c\/strong\u003eThis report evaluates the cost and technical impact of using the 1978 ATC-03-06 report, \u003cem\u003eTentative Provisions for the Development of Seismic Regulations for Buildings\u003c\/em\u003e, as amended by a joint committee of the Building Seismic Safety Council and the National Bureau of Standards in 1982. The evaluations are based on studies of three existing California buildings redesigned in accordance with the ATC-03-06 Tentative Provisions and the 1982 \u003cem\u003eUniform Building Code\u003c\/em\u003e. Included in the report are recommendations to code implementing bodies.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eClick \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/ATC-3-4-TOC.pdf?v=1783550163\" target=\"_blank\"\u003ehere\u003c\/a\u003e to view the Title Page, Preface, and Contents.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Applied Technology Council","offers":[{"title":"Default Title","offer_id":48162040512724,"sku":"ATC-3-4","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/ATC-3-4.jpg?v=1782184247"},{"product_id":"tentative-provisions-for-the-development-of-seismic-regulations-for-buildings","title":"Tentative Provisions for the Development of Seismic Regulations for Buildings","description":"\u003cp\u003eThe ATC-3-06 report, \u003cem\u003eTentative Provisions for the Development of Seismic Regulations for Buildings\u003c\/em\u003e, was funded by the National Science Foundation (NSF) and National Bureau of Standards (NBS), with amendments funded by the Federal Emergency Management Agency (FEMA). This second printing of the report includes proposed amendments. (Published 1978, amended 1982, 599 pages)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eABSTRACT: \u003c\/strong\u003eThe tentative provisions in this document represent the results of a concerted effort by a multi-disciplinary team of 85 nationally recognized experts in earthquake engineering. The provisions serve as the basis for the seismic provisions of the 1988 and subsequent issues of the Uniform Building Code and the \u003cem\u003eNEHRP Recommended Provisions for the Development of Seismic Regulation for New Buildings\u003c\/em\u003e. The second printing of this document contains proposed amendments prepared by a joint committee of the Building Seismic Safety Council (BSSC) and the NBS. The current \u003cem\u003eNEHRP Recommended Seismic Provisions for New Buildings and Other Structures \u003c\/em\u003e(FEMA 1050, 2015 Edition) and \u003cem\u003eDesign Maps \u003c\/em\u003eon CD-ROM are provided free of charge when this document is ordered.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eClick \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/atc-3-06.pdf?v=1783550167\" target=\"_blank\"\u003ehere\u003c\/a\u003e to view the Title Page, Preface, and Contents.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Applied Technology Council","offers":[{"title":"Default Title","offer_id":48162040545492,"sku":"ATC-3-06","price":60.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/ATC-3-06.jpg?v=1782184249"},{"product_id":"a-methodology-for-seismic-design-and-construction-of-single-family-dwellings","title":"A Methodology for Seismic Design and Construction of Single-Family Dwellings","description":"\u003cp\u003eThe ATC-4 report, \u003cem\u003eA Methodology for Seismic Design and Construction of Single-Family Dwellings\u003c\/em\u003e, was funded by the Department of Housing and Urban Development (HUD). (Published 1976, 507 Pages)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eABSTRACT: \u003c\/strong\u003eThis report presents the results of an in-depth effort to develop design and construction details for single-family residences that minimize the potential economic loss and life-loss risk associated with earthquakes.  \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eClick \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/ATC-4-toc.pdf?v=1783550172\" target=\"_blank\"\u003ehere\u003c\/a\u003e to view the Title Page, Preface, and Contents.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Applied Technology Council","offers":[{"title":"Default Title","offer_id":48162040578260,"sku":"ATC-4","price":60.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/COVER4.jpg?v=1782184251"},{"product_id":"the-home-builders-guide-for-earthquake-design","title":"The Home Builders Guide for Earthquake Design","description":"\u003cp\u003eThe ATC-4-1 report, \u003cem\u003eThe Home Builders Guide for Earthquake Design,\u003c\/em\u003e was published under a contract with the Department of Housing and Urban Development (HUD). (Published 1980, 63 pages)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eABSTRACT: \u003c\/strong\u003eThis report is an abridged version of the ATC-4 report. The concise, easily understood text of the \u003cem\u003eGuide \u003c\/em\u003eis supplemented with illustrations and 46 construction details. The details are provided to ensure that houses contain structural features that are properly positioned, dimensioned and constructed to resist earthquake forces. A brief description is included on how earthquake forces impact on houses and some precautionary constraints are given with respect to site selection and architectural designs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eClick \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/ATC-4-1-TOC.pdf?v=1783550176\" target=\"_blank\"\u003ehere\u003c\/a\u003e to view the Title Page, Preface, and Contents.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Applied Technology Council","offers":[{"title":"Default Title","offer_id":48162040742100,"sku":"ATC-4-1","price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/ATC-4-1.jpg?v=1782184253"},{"product_id":"guidelines-for-seismic-design-and-construction-of-single-story-masonry-dwellings-in-seismic-zone-2","title":"Guidelines for Seismic Design and Construction of Single-Story Masonry Dwellings in Seismic Zone 2","description":"\u003cp\u003eThe ATC-5 report, \u003cem\u003eGuidelines for Seismic Design and Construction of Single-Story Masonry Dwellings in Seismic Zone 2\u003c\/em\u003e, was developed under a contract with the Department of Housing and Urban Development (HUD). (Published 1986, 49 pages)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eABSTRACT: \u003c\/strong\u003eThe report offers a concise methodology for the earthquake design and construction of single-story masonry dwellings in Seismic Zone 2 of the United States, as defined by the 1973 Uniform Building Code. The \u003cem\u003eGuidelines \u003c\/em\u003eare based in part on shaking table tests of masonry construction conducted at the University of California at Berkeley Earthquake Engineering Research Center. The report is written in simple language and includes basic house plans, wall evaluations, detail drawings, and material specifications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eClick \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/ATC-5-toc.pdf?v=1783550182\" target=\"_blank\"\u003ehere\u003c\/a\u003e to view the Title Page, Preface, and Contents.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Applied Technology Council","offers":[{"title":"Default Title","offer_id":48162040807636,"sku":"ATC-5","price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/ATC-5.jpg?v=1782184255"},{"product_id":"seismic-design-guidelines-for-highway-bridges","title":"Seismic Design Guidelines for Highway Bridges","description":"\u003cp\u003eThe ATC-6 report, \u003cem\u003eSeismic Design Guidelines for Highway Bridges\u003c\/em\u003e, was published under a contract with the Federal Highway Administration (FHWA). (Published 1981, 204 pages)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eABSTRACT:\u003c\/strong\u003e The \u003cem\u003eGuidelines \u003c\/em\u003eare the recommendations of a team of sixteen nationally recognized experts that included consulting engineers, academics, state and federal agency representatives from throughout the United States. The \u003cem\u003eGuidelines \u003c\/em\u003eembody several new concepts that were significant departures from then existing design provisions. Included in the \u003cem\u003eGuidelines \u003c\/em\u003eare an extensive commentary, an example demonstrating the use of the \u003cem\u003eGuidelines\u003c\/em\u003e, and summary reports on 21 bridges redesigned in accordance with the \u003cem\u003eGuidelines\u003c\/em\u003e. In 1991, the \u003cem\u003eGuidelines \u003c\/em\u003ewere adopted by the American Association of Highway and Transportation Officials as a standard specification.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eClick \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/ATC-06.pdf?v=1783550186\" target=\"_blank\"\u003ehere\u003c\/a\u003e to view the Title Page, Preface, and Contents.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Applied Technology Council","offers":[{"title":"Default Title","offer_id":48162040840404,"sku":"ATC-6","price":40.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/ATC6-1coverV_oz8w-0w.jpg?v=1782184256"},{"product_id":"proceedings-of-a-workshop-on-earthquake-resistance-of-highway-bridges","title":"Proceedings of a Workshop on Earthquake Resistance of Highway Bridges","description":"\u003cp\u003eThe ATC-6-1 report, \u003cem\u003eProceedings of a Workshop on Earthquake Resistance of Highway Bridges\u003c\/em\u003e, was published under a grant from the National Science Foundation (NSF). (Published 1979, 625 pages)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eABSTRACT:\u003c\/strong\u003e The report includes 23 state-of-the-art and state-of-practice papers on earthquake resistance of highway bridges. Seven of the twenty-three papers were authored by participants from Japan, New Zealand and Portugal. The \u003cem\u003eProceedings \u003c\/em\u003ealso contain recommendations for future research that were developed by the 45 workshop participants.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eClick \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/ATC-6-1.pdf?v=1783550190\" target=\"_blank\"\u003ehere\u003c\/a\u003e to view the Title Page, Preface, and Contents.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Applied Technology Council","offers":[{"title":"Default Title","offer_id":48162040873172,"sku":"ATC-6-1","price":60.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/Cover6-1.jpg?v=1782184259"},{"product_id":"seismic-retrofitting-guidelines-for-highway-bridges","title":"Seismic Retrofitting Guidelines for Highway Bridges","description":"\u003cp\u003eThe ATC-6-2 report, \u003cem\u003eSeismic Retrofitting Guidelines for Highway Bridges\u003c\/em\u003e, was published under a contract with Federal Highway Administration (FHWA). (Published 1983, 220 pages)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eABSTRACT:\u003c\/strong\u003e The \u003cem\u003eGuidelines \u003c\/em\u003eare the recommendations of a team of thirteen nationally recognized experts that included consulting engineers, academics, state highway engineers, and federal agency representatives. The \u003cem\u003eGuidelines\u003c\/em\u003e, applicable for use in all parts of the United States, include a preliminary screening procedure, methods for evaluating an existing bridge in detail, and potential retrofitting measures for the most common seismic deficiencies. Also included are special design requirements for various retrofitting measures.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Applied Technology Council","offers":[{"title":"Default Title","offer_id":48162040905940,"sku":"ATC-6-2","price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/Seismic_Retrofit_4a6a2c0abca23-500x500.jpg?v=1782184260"},{"product_id":"guidelines-for-the-design-of-horizontal-wood-diaphragms","title":"Guidelines for the Design of Horizontal Wood Diaphragms","description":"\u003cp\u003eThe ATC-7 report, \u003cem\u003eGuidelines for the Design of Horizontal Wood Diaphragms\u003c\/em\u003e, was published under a grant from the National Science Foundation (NSF). (Published 1981, 184 pages)\u003c\/p\u003e\u003cp\u003eGuidance is provided for designing roof and floor systems so these can function as horizontal diaphragms in a lateral force resisting system. Analytical procedures, connection details and design examples are included in the \u003cem\u003eGuidelines\u003c\/em\u003e.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eClick \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/ATC-7-toc.pdf?v=1783550196\" target=\"_blank\"\u003ehere\u003c\/a\u003e to view the Title Page, Preface, and Contents.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Applied Technology Council","offers":[{"title":"Default Title","offer_id":48162040938708,"sku":"ATC-7","price":36.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/ATC7Cover.jpg?v=1782184262"},{"product_id":"proceedings-of-a-workshop-on-design-of-horizontal-wood-diaphragms","title":"Proceedings of a Workshop on Design of Horizontal Wood Diaphragms","description":"\u003cp\u003eThe ATC-7-1 report, \u003cem\u003eProceedings of a Workshop on Design of Horizontal Wood Diaphragms\u003c\/em\u003e, was published under a grant from the aNational Science Foudnation (NSF). (Published 1980, 302 pages)\u003c\/p\u003e\u003cp\u003eThe report includes seven papers on state-of-the-practice and two papers on recent research. Also included are recommendations for future research that were developed by the 35 workshop participants.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eClick \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/ATC-7-1-toc.pdf?v=1783550200\" target=\"_blank\"\u003ehere\u003c\/a\u003e to view the Title Page, Preface, and Contents.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Applied Technology Council","offers":[{"title":"Default Title","offer_id":48162040971476,"sku":"ATC-7-1","price":36.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/ATC7Cover_6e4d-o5.jpg?v=1782184264"},{"product_id":"proceedings-of-a-workshop-on-the-design-of-prefabricated-concrete-buildings-for-earthquake-loads","title":"Proceedings of a Workshop on the Design of Prefabricated Concrete Buildings for Earthquake Loads","description":"\u003cp\u003eThe ATC-8 report, \u003cem\u003eProceedings of a Workshop on the Design of Prefabricated Concrete Buildings for Earthquake Loads\u003c\/em\u003e, was funded by the National Science Foundation (NSF). (Published 1981, 711 pages)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eABSTRACT:\u003c\/strong\u003e The report includes eighteen state-of-the-art papers and six summary papers. Also included are recommendations for future research that were developed by the 43 workshop participants.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eClick \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/ATC-8-toc.pdf?v=1783550205\" target=\"_blank\"\u003ehere\u003c\/a\u003e to view the Title Page, Preface, and Contents.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Applied Technology Council","offers":[{"title":"Default Title","offer_id":48162041004244,"sku":"ATC-8","price":36.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/ATC-8-cover.jpg?v=1783549494"},{"product_id":"an-evaluation-of-the-imperial-county-services-building-earthquake-response-and-associated-damage","title":"An Evaluation of the Imperial County Services Building Earthquake Response and Associated Damage","description":"\u003cp\u003eThe ATC-9 report, \u003cem\u003eAn Evaluation of the Imperial County Services Building Earthquake Response and Associated Damage\u003c\/em\u003e, was published under a grant from the National Science Foundation (NSF). (Published 1984, 231 pages)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eABSTRACT:\u003c\/strong\u003e The report presents the results of an in-depth evaluation of the Imperial County Services Building, a 6-story reinforced concrete frame and shear wall building severely damaged by the October 15, 1979 Imperial Valley, California, earthquake. \u003cspan\u003eThe report contains a review and evaluation of earthquake damage to the building, a review and evaluation of the seismic design, a comparison of the requirements of various building codes as they relate to the building, and conclusions and recommendations pertaining to future building code provisions and future research needs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClick \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/ATC-9TOC.pdf?v=1783550210\" target=\"_blank\"\u003ehere\u003c\/a\u003e to view the Title Page, Preface, and Contents.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Applied Technology Council","offers":[{"title":"Default Title","offer_id":48162041037012,"sku":"ATC-9","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/atc09cover.jpg?v=1782184267"},{"product_id":"an-investigation-of-the-correlation-between-earthquake-ground-motion-and-building-performance","title":"An Investigation of the Correlation Between Earthquake Ground Motion and Building Performance","description":"\u003cp\u003eThe ATC-10 report, \u003cem\u003eAn Investigation of the Correlation Between Earthquake Ground Motion and Building Performance\u003c\/em\u003e, was funded by the U.S. Geological Survey (USGS). (Published 1982, 114 pages)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eABSTRACT:\u003c\/strong\u003e The report contains an in-depth analytical evaluation of the ultimate or limit capacity of selected representative building framing types, a discussion of the factors affecting the seismic performance of buildings, and a summary and comparison of seismic design and seismic risk parameters currently in widespread use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eClick \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/ATC-10TOC.pdf?v=1783550214\" target=\"_blank\"\u003ehere\u003c\/a\u003e to view the Title Page, Preface, and Contents.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Applied Technology Council","offers":[{"title":"Default Title","offer_id":48162041135316,"sku":"ATC-10","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/ATC10.gif?v=1782184269"},{"product_id":"critical-aspects-of-earthquake-ground-motion-and-building-damage-potential","title":"Critical Aspects of Earthquake Ground Motion and Building Damage Potential","description":"\u003cp\u003eThe ATC-10-1 report, \u003cem\u003eCritical Aspects of Earthquake Ground Motion and Building Damage Potential\u003c\/em\u003e, was co-funded by the U.S. Geological Survey (USGS) and the National Science Foundation (NSF). (Published 1984, 259 pages)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eABSTRACT:\u003c\/strong\u003e This document contains 19 state-of-the-art papers on ground motion, structural response, and structural design issues presented by prominent engineers and earth scientists in an ATC seminar. The main theme of the papers is to identify the critical aspects of ground motion and building performance that currently are not being considered in building design. The report also contains conclusions and recommendations of working groups convened after the Seminar.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eClick \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/ATC-10-1TOC.pdf?v=1783550218\" target=\"_blank\"\u003ehere\u003c\/a\u003e to view the Title Page, Preface, and Contents.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Applied Technology Council","offers":[{"title":"Default Title","offer_id":48162041299156,"sku":"ATC-10-1","price":40.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/Critical_Aspects_4a0120b82390b-500x500.gif?v=1782184270"},{"product_id":"seismic-resistance-of-reinforced-concrete-shear-walls-and-frame-joints-implications-of-recent-research-for-design-engineers","title":"Seismic Resistance of Reinforced Concrete Shear Walls and Frame Joints: Implications of Recent Research for Design Engineers","description":"\u003cp\u003eThe ATC-11 report, \u003cem\u003eSeismic Resistance of Reinforced Concrete Shear Walls and Frame Joints: Implications of Recent Research for Design Engineers\u003c\/em\u003e, was published under a grant from the National Science Foundation (NSF). (Published 1983, 184 pages)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eABSTRACT:\u003c\/strong\u003e This document presents the results of an in-depth reClick \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/ATC-11TOC.pdf?v=1783550222\" target=\"_blank\"\u003ehere\u003c\/a\u003e to view the Title Page, Preface, and Contents.\u003c\/p\u003e","brand":"Applied Technology Council","offers":[{"title":"Default Title","offer_id":48162041364692,"sku":"ATC-11","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/ATC-11.jpg?v=1782184272"},{"product_id":"comparison-of-united-states-and-new-zealand-seismic-design-practices-for-highway-bridges","title":"Comparison of United States and New Zealand Seismic Design Practices for Highway Bridges","description":"\u003cp\u003eThe ATC-12 report, \u003cem\u003eComparison of United States and New Zealand Seismic Design Practices for Highway Bridges\u003c\/em\u003e, was published under a grant from the National Science Foundation (NSF). (Published 1982, 270 pages)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eABSTRACT:\u003c\/strong\u003e The report contains summaries of all aspects and innovative design procedures used in New Zealand as well as comparison of United States and New Zealand design practice. Also included are research recommendations developed at a 3-day workshop in New Zealand attended by 16 U.S. and 35 New Zealand bridge design engineers and researchers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eClick \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/ATC-12TOC.pdf?v=1783550226\" target=\"_blank\"\u003ehere\u003c\/a\u003e to view the Title Page, Preface, and Contents.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Applied Technology Council","offers":[{"title":"Default Title","offer_id":48162041397460,"sku":"ATC-12","price":40.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/Cover12.jpg?v=1782184274"},{"product_id":"proceedings-of-2nd-joint-u-s-new-zealand-workshop-on-seismic-resistance-of-highway-bridges","title":"Proceedings of 2nd Joint U.S.-New Zealand Workshop on Seismic Resistance of Highway Bridges","description":"\u003cp\u003eThe ATC-12-1 report,\u003cem\u003eProceedings of 2nd Joint U.S.-New Zealand Workshop on Seismic Resistance of Highway Bridges\u003c\/em\u003e, was published under a grant from the National Science Foundation (NSF). (Published 1986, 272 pages)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eABSTRACT:\u003c\/strong\u003e This report contains written versions of the papers presented at this 1985 workshop as well as a list and prioritization of workshop recommendations. Included are summaries of research projects being conducted in both countries as well as state-of-the-practice papers on various aspects of design practice. Topics discussed include bridge design philosophy and loadings, design of columns, footings, piles, abutments and retaining structures, geotechnical aspects of foundation design, seismic analysis techniques, seismic retrofitting, case studies using base isolation, strong-motion data acquisition and interpretation, and testing of bridge components and bridge systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eClick \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/ATC-12-1TOC.pdf?v=1783550230\" target=\"_blank\"\u003ehere\u003c\/a\u003e to view the Title Page, Preface, and Contents.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Applied Technology Council","offers":[{"title":"Default Title","offer_id":48162041430228,"sku":"ATC-12-1","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/COVER12-1.jpg?v=1782184276"},{"product_id":"earthquake-damage-evaluation-data-for-california","title":"Earthquake Damage Evaluation Data for California","description":"\u003cp\u003eThe ATC-13 report, \u003cem\u003eEarthquake Damage Evaluation Data for California\u003c\/em\u003e, was developed under a contract with the Federal Emergency Management Agency (FEMA). (Published 1985, 492 pages)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eABSTRACT:\u003c\/strong\u003e This report presents expert-opinion earthquake damage and loss estimates for industrial, commercial, residential, utility and transportation facilities in California. Included are damage probability matrices for 78 classes of structures and estimates of time required to restore damaged facilities to pre-earthquake usability*. The report also describes the inventory information essential for estimating economic losses and the methodology used to develop loss estimates on a regional basis.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eClick \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/atc13-TOC.pdf?v=1783550234\" target=\"_blank\"\u003ehere\u003c\/a\u003e to view the Title Page, Preface, and Contents.\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Applied Technology Council","offers":[{"title":"Default Title","offer_id":48162041462996,"sku":"ATC-13","price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/ATC-13_COVER.jpg?v=1782184278"},{"product_id":"commentary-on-the-use-of-atc-13-earthquake-damage-evaluation-data-for-probable-maximum-loss-studies-of-california-buildings","title":"Commentary on the Use of ATC-13 Earthquake Damage Evaluation Data for Probable Maximum Loss Studies of California Buildings","description":"\u003cp\u003eThe ATC-13-1 report, \u003cem\u003eCommentary on the Use of ATC-13 Earthquake Damage Evaluation Data for Probable Maximum Loss Studies of California Buildings\u003c\/em\u003e, was funded by the \u003ca href=\"atc-endowment-fund.html\"\u003eATC Henry J. Degenkolb Memorial Endowment Fund\u003c\/a\u003e (Published 2002, 66 pages).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eABSTRACT:\u003c\/strong\u003e The purpose of this \u003cem\u003eCommentary\u003c\/em\u003e is to provide guidance to consulting firms who are using ATC-13 expert-opinion data (published by ATC in 1985) for probable maximum loss (PML) studies of California buildings. This report explains the development of the ATC-13 expert-opinion estimates of physical damage caused by earthquakes, the limitations of the ATC-13 data, and the issues associated with using the data for PML studies.\u003c\/p\u003e\n\u003cp\u003eThe ATC-13-1 \u003cem\u003eCommentary\u003c\/em\u003e contains:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ea discussion of the scope and results of the ATC-13 project,\u003c\/li\u003e\n\u003cli\u003ea description of the most common type of PML study,\u003c\/li\u003e\n\u003cli\u003ea discussion and some examples of how ATC-13 is typically used as a basis for a PML study,\u003c\/li\u003e\n\u003cli\u003erecommended improvements to the ATC-13 data, and\u003c\/li\u003e\n\u003cli\u003ethree appendices containing information and data not included in the original ATC-13 report:\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003col\u003e\n\u003cli style=\"list-style-type: none;\"\u003e\n\u003col\u003e\n\u003cli\u003eATC-13 model building type descriptions, including methodology for estimating the expected performance of standard, nonstandard, and special construction;\u003c\/li\u003e\n\u003cli\u003eATC-13 Beta damage distribution parameters for model building types; and\u003c\/li\u003e\n\u003cli\u003ePML values for ATC-13 model building types.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eClick \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/ATC13-1toc.pdf?v=1783550239\" target=\"_blank\"\u003ehere\u003c\/a\u003e to view the Title Page, Preface, and Contents.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Applied Technology Council","offers":[{"title":"Default Title","offer_id":48162041495764,"sku":"ATC-13-1","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/ATC13-1.jpg?v=1782184279"},{"product_id":"evaluating-the-seismic-resistance-of-existing-buildings","title":"Evaluating the Seismic Resistance of Existing Buildings","description":"\u003cp\u003eThe ATC-14 report, \u003cem\u003eEvaluating the Seismic Resistance of Existing Buildings\u003c\/em\u003e, was developed under a grant from the National Science Foundation (NSF). (Published 1987, 370 pages)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eABSTRACT:\u003c\/strong\u003e This report, written for practicing structural engineers, describes a methodology for performing preliminary and detailed building seismic evaluations. The report contains a state-of-practice \u003cspan\u003ereview, seismic loading criteria, data collection procedures, a detailed description of the building classification system, preliminary and detailed analysis procedures, and example case studies, including nonstructural considerations.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClick \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/ATC-14-TOC.pdf?v=1783550244\" target=\"_blank\"\u003ehere\u003c\/a\u003e to view the Title Page, Preface, and Contents.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Applied Technology Council","offers":[{"title":"Default Title","offer_id":48162041561300,"sku":"ATC-14","price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/ATC-14.jpg?v=1782184283"},{"product_id":"comparison-of-seismic-design-practices-in-the-united-states-and-japan","title":"Comparison of Seismic Design Practices in the United States and Japan","description":"\u003cp\u003eThe ATC-15 report, \u003cem\u003eComparison of Seismic Design Practices in the United States and Japan\u003c\/em\u003e, was published under a grant from the National Science Foundation (NSF). (Published 1984, 317 pages)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eABSTRACT:\u003c\/strong\u003e The report contains detailed technical papers describing design practices in the United States and Japan as well as recommendations emanating from a joint U.S.-Japan workshop held in Hawaii in March, 1984. Included are detailed descriptions of new seismic design methods for buildings in Japan and case studies of the design of specific buildings (in both countries). The report also contains an \u003cspan\u003eoverview of the history and objectives of the Japan Structural Consultants Association (JSCA).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClick \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/ATC-15TOC.pdf?v=1783550249\" target=\"_blank\"\u003ehere\u003c\/a\u003e to view the Title Page, Preface, and Contents.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Applied Technology Council","offers":[{"title":"Default Title","offer_id":48162041594068,"sku":"ATC-15","price":40.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/ATC15-1coverV.jpg?v=1782184285"},{"product_id":"proceedings-of-second-u-s-japan-workshop-on-improvement-of-building-seismic-design-and-construction-practices","title":"Proceedings of Second U.S.-Japan Workshop on Improvement of Building Seismic Design and Construction Practices","description":"\u003cp\u003eThe ATC-15-1 report,\u003cem\u003eProceedings of Second U.S.-Japan Workshop on Improvement of Building Seismic Design and Construction Practi\u003c\/em\u003eces, was published under a grant from the National Science Foudnation (NSF). (Published 1987, 412 pages)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eABSTRACT:\u003c\/strong\u003e This report contains 23 technical papers presented at this San Francisco workshop in August, 1986, by practitioners and researchers from the U.S. and Japan. Included are state-of-the-practice papers and case studies of actual building designs and information on regulatory, contractual, and licensing issues.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eClick \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/ATC-15-1TOC.pdf?v=1783550252\" target=\"_blank\"\u003ehere\u003c\/a\u003e to view the Title Page, Preface, and Contents.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Applied Technology Council","offers":[{"title":"Default Title","offer_id":48162041659604,"sku":"ATC-15-1","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/Cover15-1.gif?v=1782184286"},{"product_id":"proceedings-of-third-u-s-japan-workshop-on-improvement-of-building-structural-design-and-construction-practices","title":"Proceedings of Third U.S.-Japan Workshop on Improvement of Building Structural Design and Construction Practices","description":"\u003cp\u003eThe ATC-15-2 report, \u003cem\u003eProceedings of Third U.S.-Japan Workshop on Improvement of Building Structural Design and Construction Practices\u003c\/em\u003e, was published jointly by ATC and the Japan Structural Consultants Association. (Published 1989, 358 pages)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eABSTRACT:\u003c\/strong\u003e This report contains 21 technical papers presented at this Tokyo, Japan, workshop in July, 1988, by practitioners and researchers from the U.S., Japan, China, and New Zealand. Included are state-of-the-practice papers on various topics, including braced steel frame buildings, beam-column joints in reinforced concrete buildings, summaries of comparative U. S. and Japanese design, and base isolation and passive energy dissipation devices.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eClick \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/ATC-15-2TOC.pdf?v=1783550256\" target=\"_blank\"\u003ehere\u003c\/a\u003e to view the Title Page, Preface, and Contents.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Applied Technology Council","offers":[{"title":"Default Title","offer_id":48162041692372,"sku":"ATC-15-2","price":40.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/Cover15-2.gif?v=1782184288"},{"product_id":"proceedings-of-fourth-u-s-japan-workshop-on-improvement-of-building-structural-design-and-construction-practices","title":"Proceedings of Fourth U.S.-Japan Workshop on Improvement of Building Structural Design and Construction Practices","description":"\u003cp\u003eThe ATC-15-3 report, \u003cem\u003eProceedings of Fourth U.S.-Japan Workshop on Improvement of Building Structural Design and Construction Practices\u003c\/em\u003e, was published jointly by ATC and the Japan Structural Consultants Association. (Published 1992, 484 pages)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eABSTRACT:\u003c\/strong\u003e This report contains 22 technical papers presented at this Kailua-Kona, Hawaii, workshop in August, 1990, by practitioners and researchers from the United States, Japan, and Peru. Included are papers on postearthquake building damage assessment, acceptable earth-quake damage, repair and retrofit of earthquake damaged buildings, base-isolated buildings, including Architectural Institute of Japan recommendations for design, active damping systems, wind-resistant design, and summaries of working group conclusions and recommendations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eClick \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/ATC-15-3TOC.pdf?v=1783550261\" target=\"_blank\"\u003ehere\u003c\/a\u003e to view the Title Page, Preface, and Contents.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Applied Technology Council","offers":[{"title":"Default Title","offer_id":48162041888980,"sku":"ATC-15-3","price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/ATC15-3coverV.jpg?v=1782184290"},{"product_id":"proceedings-of-fifth-u-s-japan-workshop-on-improvement-of-building-structural-design-and-construction-practices","title":"Proceedings of Fifth U.S.-Japan Workshop on Improvement of Building Structural Design and Construction Practices","description":"\u003cp\u003eThe ATC-15-4 report, \u003cem\u003eProceedings of Fifth U.S.-Japan Workshop on Improvement of Building Structural Design and Construction Practices\u003c\/em\u003e, was published jointly by ATC and the Japan Structural Consultants Association. (Published 1994, 360 pages)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eABSTRACT:\u003c\/strong\u003e This report contains 20 technical papers presented at this San Diego, California workshop in September, 1992. Included are papers on performance goals\/acceptable damage in seismic design, seismic design procedures and case studies, construction influences on design, seismic isolation and passive energy dissipation, design of irregular structures, seismic evaluation, repair and upgrading, quality control for design and construction, and summaries of working group discussions and recommendations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eClick \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/ATC-15-4TOC.pdf?v=1783550266\" target=\"_blank\"\u003ehere\u003c\/a\u003e to view the Title Page, Preface, and Contents.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Applied Technology Council","offers":[{"title":"Default Title","offer_id":48162041921748,"sku":"ATC-15-4","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/COVER15-4.jpg?v=1782184291"},{"product_id":"proceedings-of-a-seminar-and-workshop-on-base-isolation-and-passive-energy-dissipation","title":"Proceedings of a Seminar and Workshop on Base Isolation and Passive Energy Dissipation","description":"\u003cp\u003eThe ATC-17 report, \u003cem\u003eProceedings of a Seminar and Workshop on Base Isolation and Passive Energy Dissipation\u003c\/em\u003e, was published under a grant from the National Science Foundation (NSF). (Published 1986, 478 pages)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eABSTRACT:\u003c\/strong\u003e The report contains 42 papers describing the state-of-the-art and state-of-the-practice in base-isolation and passive energy-dissipation technology. Included are papers describing case studies in the United States, applications and developments worldwide, recent innovations in technology development, and structural and ground motion issues. Also included is a proposed 5-year research agenda that addresses the following specific issues: (1) strong ground motion, (2) design criteria, (3) materials, quality control, and long-term reliability, (4) life cycle cost methodology, and (5) system response.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eClick \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/ATC-17TOC.pdf?v=1783550270\" target=\"_blank\"\u003ehere\u003c\/a\u003e to view the Title Page, Preface, and Contents.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Applied Technology Council","offers":[{"title":"Default Title","offer_id":48162041954516,"sku":"ATC-17","price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/Cover17.gif?v=1782184293"},{"product_id":"proceedings-of-seminar-on-seismic-isolation-passive-energy-dissipation-and-active-control","title":"Proceedings of Seminar on Seismic Isolation, Passive Energy Dissipation and Active Control","description":"\u003cp\u003eThe ATC-17-1 report, \u003cem\u003eProceedings of Seminar on Seismic Isolation, Passive Energy Dissipation and Active Control\u003c\/em\u003e, was published under a grant from the National Center for Earthquake Engineering Research (NCEER) and the National Science Foundation (NSF). (Published 1993, 841 pages)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eABSTRACT:\u003c\/strong\u003e The 2-volume report documents 70 technical papers presented during a two-day seminar in San Francisco in early 1993. Included are invited theme papers and competitively selected papers on issues related to seismic isolation systems, passive energy dissipation systems, active control systems and hybrid systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eClick \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/ATC-17-1TOC.pdf?v=1783550274\" target=\"_blank\"\u003ehere\u003c\/a\u003e to view the Title Page, Preface, and Contents.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Applied Technology Council","offers":[{"title":"Default Title","offer_id":48162041987284,"sku":"ATC-17-1","price":75.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/Cover17-1v2.jpg?v=1782184295"},{"product_id":"structural-response-modification-factors","title":"Structural Response Modification Factors","description":"\u003cp\u003eThe ATC-19 report, \u003cem\u003eStructural Response Modification Factors\u003c\/em\u003e, was funded by the National Science Foundation (NSF) and the National Center for Earthquake Engineering Research (NCEER). (Published 1995, 70 pages)\u003c\/p\u003e\u003cp\u003eThis report addresses structural response modification factors (R factors), which are used to reduce the seismic forces associated with elastic response to obtain design forces. The report documents the basis for current R values, how R factors are used for seismic design in other countries, a rational means for decomposing R into key components, a framework (and methods) for evaluating the key components of R, and the research necessary to improve the reliability of engineered construction designed using R factors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eClick \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/atc19-toc.pdf?v=1783550278\" target=\"_blank\"\u003ehere\u003c\/a\u003e to view the Title Page, Preface, and Contents.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Applied Technology Council","offers":[{"title":"Default Title","offer_id":48162042249428,"sku":"ATC-19","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/ATC-19.jpg?v=1782184296"},{"product_id":"field-manual-postearthquake-safety-evaluation-of-buildings-2nd-edition","title":"Field Manual: Postearthquake Safety Evaluation of Buildings (2nd Edition)","description":"\u003cp\u003eABSTRACT: The ATC 20-1 \u003cem\u003eField Manual: Postearthquake Safety Evaluation of Buildings (2nd Edition)\u003c\/em\u003e, was introduced in 1989 as a companion document to the ATC-20 report. The second (2005) edition of the \u003cem\u003eField Manual\u003c\/em\u003e has been updated to include:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ethe RESTRICTED USE placard, which was introduced in 1995 (replacing the LIMITED ENTRY placard),\u003c\/li\u003e\n\u003cli\u003eupdated evaluation forms, which were also introduced in 1995,\u003c\/li\u003e\n\u003cli\u003enew examples,\u003c\/li\u003e\n\u003cli\u003emore information on steel moment-frame buildings,\u003c\/li\u003e\n\u003cli\u003ea chapter on mobile homes and manufactured housing,\u003c\/li\u003e\n\u003cli\u003eguidance on aftershocks and entering damaged buildings,\u003c\/li\u003e\n\u003cli\u003enew information on barricading, and\u003c\/li\u003e\n\u003cli\u003eresources available on the internet pertaining to post earthquake safety evaluation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe pocket-sized \u003cem\u003eField Manual \u003c\/em\u003esummarizes the post earthquake safety evaluation procedures in brief concise format designed for ease of use in the field.\u003c\/p\u003e\u003cp\u003e\u003cb\u003e\u003cspan style=\"color: rgb(192, 80, 77);\"\u003eAvailable in hard copy format only and NOT available in electronic format.  \u003c\/span\u003e\u003c\/b\u003eDownloadable Placards and Evaluation Forms can be found \u003ca href=\"https:\/\/www.atcouncil.org\/placards-and-evaluation-forms\" target=\"_blank\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eClick \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/ATC201tocv2.pdf?v=1783550282\" target=\"_blank\"\u003ehere\u003c\/a\u003e to view the Title Page, Preface, and Contents.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA 20% discount is automatically applied to orders of 5 to 999 \u003cem\u003eField Manuals\u003c\/em\u003e.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA 30% discount is automatically applied to orders of 1,000 or more \u003cem\u003eField Manuals.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Applied Technology Council","offers":[{"title":"Default Title","offer_id":48162042282196,"sku":"ATC-20-1","price":24.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/ATC20-1Cover.jpg?v=1782184298"},{"product_id":"procedures-for-postearthquake-safety-evaluation-of-buildings-addendum","title":"Procedures for Postearthquake Safety Evaluation of Buildings \u0026 Addendum","description":"\u003cp\u003eThe ATC-20 Set consists of two documents: the ATC-20 report, \u003cem\u003eProcedures for Postearthquake Safety Evaluation of Buildings\u003c\/em\u003e, and the ATC-20-2 Report, \u003cem\u003eAddendum to the ATC-20 Postearthquake Building Safety Evaluation Procedures\u003c\/em\u003e. The ATC-20 report was developed under a contract from the California Office of Emergency Services (OES), California Office of Statewide Health Planning and Development (OSHPD) and FEMA. (Published 1989, 152 pages). The ATC-20-2 Addendum, developed under a grant from the National Science Foundation (NSF), with funding provided by the U. S. Geological Survey (USGS), contains revised placards and safety assessment forms, based on ATC-20 use following the 1989 Loma Prieta, 1992 Cape Mendocino, 1992 Landers, 1992 Big Bear, and 1994 Northridge earthquakes (Published 1995, 94 pages).\u003c\/p\u003e\u003cp\u003e\u003cb\u003e\u003cspan style=\"color: rgb(192, 80, 77);\"\u003eAvailable in hard copy format only and NOT available in electronic format.  \u003c\/span\u003e\u003c\/b\u003eDownloadable Placards and Evaluation Forms can be found \u003ca href=\"https:\/\/www.atcouncil.org\/placards-and-evaluation-forms\" target=\"_blank\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eATC-20 ABSTRACT: Introduced two weeks prior to the 1989 Loma Prieta earthquake, the ATC-20 report provides procedures and guidelines for making on-the-spot evaluations and decisions regarding continued use and occupancy of earthquake damaged buildings. Written specifically for volunteer structural engineers and building inspectors, the report has become the de-facto national standard for safety evaluation of earthquake-damaged buildings. The report includes rapid and detailed evaluation procedures for inspecting buildings and posting them as INSPECTED (apparently safe, green placard), LIMITED ENTRY (yellow placard) or UNSAFE (red placard). Also included are special procedures for evaluation of essential buildings (e.g., hospitals), evaluation procedures for nonstructural elements and geo-technical hazards, and guidance on human behavior following earthquakes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eClick \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/ATC-20-toc.pdf?v=1783550295\" target=\"_blank\"\u003ehere\u003c\/a\u003e to view the Title Page, Preface, and Contents.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eATC-20-2 ABSTRACT: The ATC-20-2 \u003cem\u003eAddendum \u003c\/em\u003ereport provides updated assessment forms, placards, and procedures that are based on an in-depth reClick \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/ATC-20-toc.pdf?v=1783550295\" target=\"_blank\"\u003ehere\u003c\/a\u003e to view the Title Page, Preface, and Contents.\u003c\/p\u003e\u003cp\u003eATC recommends that users of the ATC-20 procedures purchase the ATC-20 set, rather than referring only to the ATC-20 report, so that they have access to all available information about the procedures, including the revised placards and revised evaluation forms.\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"font-size:14.4444446563721px\"\u003e20% Discount on Orders of 5 or More!\u003c\/span\u003e\u003c\/p\u003e","brand":"Applied Technology Council","offers":[{"title":"Default Title","offer_id":48162042347732,"sku":"ATC-20 Set","price":39.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/ATC-20and-20-2.jpg?v=1782184301"},{"product_id":"fema-155-rapid-visual-screening-of-buildings-for-potential-seismic-hazards-supporting-documentation-2nd-edition","title":"FEMA 155, Rapid Visual Screening of Buildings for Potential Seismic Hazards: Supporting Documentation (2nd Edition)","description":"\u003cp\u003eThe ATC-21-1 report, \u003cem\u003eRapid Visual Screening of Buildings for Potential Seismic Hazards: Supporting Documentation\u003c\/em\u003e (2nd Edition, FEMA 155), was funded by the Federal Emergency Management Agency (FEMA) and developed under the ATC-21 Update Project. (Published 2002, 117 pages)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eABSTRACT:\u003c\/strong\u003e Included in this report is the technical basis for the updated rapid visual screening procedure of ATC-21, including (1) a summary of the results from the efforts to solicit user feedback, and (2) a detailed description of the development effort leading to the basic structural hazard scores and the score modifiers.\u003c\/p\u003e\u003cp\u003eAvailable free of charge by contacting FEMA (phone: 1-800-480-2520). \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eClick \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/FEMA155.pdf?v=1783550308\" target=\"_blank\"\u003ehere\u003c\/a\u003e to view the Title Page, Preface, and Contents.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Applied Technology Council","offers":[{"title":"Default Title","offer_id":48162042478804,"sku":"ATC-21-1","price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/ATC-21-1_FEMA_155-2002.jpg?v=1782184306"},{"product_id":"rapid-visual-screening-of-buildings-for-potential-seismic-hazards-training-manual","title":"Rapid Visual Screening of Buildings for Potential Seismic Hazards Training Manual","description":"\u003cp\u003eThe report was developed under a contract with FEMA. (Published 1996, 135 pages, 120 slides, updated to Microsoft PowerPoint format, 2003)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eABSTRACT:\u003c\/strong\u003e This training manual, available in electronic format on CD ROM, is intended to facilitate the presentation of the contents of the FEMA 154 (ATC-21) report (first edition). The training materials consist of 120 slides on one CD (in PowerPoint), and a companion training presentation narrative coordinated with the slide presentation. Topics covered include: description of procedure, building behavior, building types, building scores, occupancy and falling hazards, and implementation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eClick \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/ATC-21-T-TOC.pdf?v=1783550313\" target=\"_blank\"\u003ehere\u003c\/a\u003e to view the Title Page, Preface, and Contents. \u003c\/strong\u003e\u003c\/p\u003e","brand":"Applied Technology Council","offers":[{"title":"Default Title","offer_id":48162042511572,"sku":"ATC-21-T","price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/ATC-21-T.jpg?v=1782184308"},{"product_id":"general-acute-care-hospital-earthquake-survivability-inventory-for-california-part-a","title":"General Acute Care Hospital Earthquake Survivability Inventory for California, Part A","description":"\u003cp\u003eThe ATC-23A report, \u003cem\u003eGeneral Acute Care Hospital Earthquake Survivability Inventory for California, Part A: Survey Description, Summary of Results, Data Analysis and Interpretation,\u003c\/em\u003e was developed under a contract from the Office of Statewide Health Planning and Development (OSHPD), State of California. (Published 1991, 58 pages)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eABSTRACT:\u003c\/strong\u003e This report summarizes results from a seismic survey of 490 California acute care hospitals. Included are a description of the survey procedures and data collected, a summary of the data, and an illustrative discussion of data analysis and interpretation that has been provided to demonstrate potential applications of the ATC-23 database.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eClick \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/atc263Atoc.pdf?v=1783550318\" target=\"_blank\"\u003ehere\u003c\/a\u003e to view the Title Page, Preface, and Contents.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Applied Technology Council","offers":[{"title":"Default Title","offer_id":48162042544340,"sku":"ATC-23A","price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/Cover23A.gif?v=1782184310"},{"product_id":"general-acute-care-hospital-earthquake-survivability-inventory-for-california-part-b","title":"General Acute Care Hospital Earthquake Survivability Inventory for California, Part B","description":"\u003cp\u003eThe ATC-23B report, \u003cem\u003eGeneral Acute Care Hospital Earthquake Survivability Inventory for California, Part B: Raw Data,\u003c\/em\u003e is a companion document to the ATC-23A Report and was developed under the same contract from the Office of Statewide Health Planning and Development (OSHPD), State of California. Available through the ATC office. (Published 1991, 377 pages)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eABSTRACT:\u003c\/strong\u003e Included in this report are tabulations of raw general site and building data for 490 acute care hospitals in California.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eClick \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/ATC-23BTOC.pdf?v=1783550321\" target=\"_blank\"\u003ehere\u003c\/a\u003e to view the Title Page, Preface, and Contents.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Applied Technology Council","offers":[{"title":"Default Title","offer_id":48162042577108,"sku":"ATC-23B","price":48.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/Cover23B.gif?v=1782184311"},{"product_id":"guidelines-for-seismic-testing-of-components-of-steel-structures","title":"Guidelines for Seismic Testing of Components of Steel Structures","description":"\u003cp\u003eThe ATC-24 report, \u003cem\u003eGuidelines for Seismic Testing of Components of Steel Structures\u003c\/em\u003e, was jointly funded by the American Iron and Steel Institute (AISI), American Institute of Steel Construction (AISC), National Center for Earthquake Engineering Research (NCEER), and the National Science Foundation (NSF). (Published 1992, 57 pages)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eABSTRACT:\u003c\/strong\u003e This report provides guidance for most cyclic experiments on components of steel structures for the purpose of consistency in experimental procedures. The report contains recommendations and companion commentary pertaining to loading histories, presentation of test results, and other aspects of experimentation. The recommendations are written specifically for experiments with slow cyclic load application.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eClick \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/ATC-24TOC.pdf?v=1783550326\" target=\"_blank\"\u003ehere\u003c\/a\u003e to view the Title Page, Preface, and Contents.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Applied Technology Council","offers":[{"title":"Default Title","offer_id":48162042609876,"sku":"ATC-24","price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/Cover24.gif?v=1782184313"},{"product_id":"seismic-vulnerability-and-impact-of-disruption-of-lifelines-in-the-conterminous-united-states","title":"Seismic Vulnerability and Impact of Disruption of Lifelines in the Conterminous United States","description":"\u003cp\u003eThe ATC-25 report, \u003cem\u003eSeismic Vulnerability and Impact of Disruption of Lifelines in the Conterminous United States\u003c\/em\u003e,æ was developed under a contract from the Federal Emergency Management Agency (FEMA). (Published 1991, 440 pages)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eABSTRACT:\u003c\/strong\u003e This report documents a national overClick \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/ATC-25-TOC.pdf?v=1783550330\" target=\"_blank\"\u003ehere\u003c\/a\u003e to view the Title Page, Preface, and Contents.\u003c\/p\u003e","brand":"Applied Technology Council","offers":[{"title":"Default Title","offer_id":48162042642644,"sku":"ATC-25","price":65.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/ATC25cover.jpg?v=1782184315"},{"product_id":"a-model-methodology-for-assessment-of-seismic-vulnerability-and-impact-of-disruption-of-water-supply-systems","title":"A Model Methodology for Assessment of Seismic Vulnerability and Impact of Disruption of Water Supply Systems","description":"\u003cp\u003eThe ATC-25-1 report, \u003cem\u003eA Model Methodology for Assessment of Seismic Vulnerability and Impact of Disruption of Water Supply Systems\u003c\/em\u003e, was developed under a contract from the Federal Emergency Management Agency (FEMA). (Published 1992, 147 pages)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eABSTRACT:\u003c\/strong\u003e This report contains a practical methodology for the detailed assessment of seismic vulnerability and impact of disruption of water supply systems. The methodology has been designed for use by water system operators. Application of the methodology enables the user to develop estimates of direct damage to system components and the time required to restore damaged facilities to pre-earthquake usability. Suggested measures for mitigation of seismic hazards are also provided.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eClick \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/ATC-25-1TOC.pdf?v=1783550335\" target=\"_blank\"\u003ehere\u003c\/a\u003e to view the Title Page, Preface, and Contents.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Applied Technology Council","offers":[{"title":"Default Title","offer_id":48162042675412,"sku":"ATC-25-1","price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/ATC25-1cover.jpg?v=1782184317"},{"product_id":"field-manual-postearthquake-safety-evaluation-of-postal-buildings-interim","title":"Field Manual: Postearthquake Safety Evaluation of Postal Buildings (Interim)","description":"\u003cp\u003eThis report, \u003cem\u003eField Manual: Postearthquake Safety Evaluation of Postal Buildings (Interim)\u003c\/em\u003e, was developed under a contract with the U. S. Postal Service (Published 1992, 133 pages).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eABSTRACT:\u003c\/strong\u003e This \u003cem\u003eField Manual\u003c\/em\u003e provides interim procedures and guidelines for determining if damaged postal buildings can be safely occupied after damaging earthquakes. Formatted as an easy-to-use pocket guide, the \u003cem\u003eManual\u003c\/em\u003e is intended to be used by USPS professional staff and facility managers, structural engineers, and others involved in postearthquake building inspections. Procedures are given for three different levels of safety evaluation, including an initial damage assessment, which is designed to determine if the facility can remain open for business or should be further evaluated. Advice is provided on evaluating structural, geotechnical, and nonstructural risks for structures subject to earthquake damage and on field safety for building inspectors. The document also includes posting placards and example applications of the procedures.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eClick \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/atc-26-3-toc.pdf?v=1783550345\" target=\"_blank\"\u003ehere\u003c\/a\u003e to view the Title Page, Preface, and Contents.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Applied Technology Council","offers":[{"title":"Default Title","offer_id":48162042773716,"sku":"ATC-26-3","price":18.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/ATC26-3cover.jpg?v=1782184322"},{"product_id":"field-manual-post-flood-and-wind-storm-safety-evaluation-of-postal-buildings-interim","title":"Field Manual: Post Flood and Wind Storm Safety Evaluation of Postal Buildings (Interim)","description":"\u003cp\u003eThis report, \u003cem\u003eField Manual: Post Flood and Wind Storm Safety Evaluation of Postal Buildings (Interim)\u003c\/em\u003e, was developed under a contract with the U. S. Postal Service (Published 1992, 114 pages).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eABSTRACT:\u003c\/strong\u003e This \u003cem\u003eField Manual\u003c\/em\u003e provides interim procedures and guidelines for determining if damaged postal buildings can be safely occupied after damaging wind storms and floods. Formatted as an easy-to-use pocket guide, the \u003cem\u003eManual\u003c\/em\u003e is intended to be used by USPS professional staff and facility managers, structural engineers, and others involved in postdisaster building inspections. Procedures are given for three different levels of safety evaluation, including an initial damage assessment, which is designed to determine if the facility can remain open for business or should be further evaluated. Advice is provided on evaluating structural, geotechnical, and nonstructural risks for structures subject to wind or flood damage and on field safety for building inspectors. The document also includes posting placards and example applications of the procedures.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eClick \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/atc-26-3-A-toc.pdf?v=1783550350\" target=\"_blank\"\u003ehere\u003c\/a\u003e to view the Title Page, Preface, and Contents.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Applied Technology Council","offers":[{"title":"Default Title","offer_id":48162042806484,"sku":"ATC-26-3A","price":18.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/ATC26-3Acover.jpg?v=1782184324"},{"product_id":"fema-237-development-of-guidelines-for-seismic-rehabilitation-of-buildings-phase-i","title":"FEMA 237, Development of Guidelines for Seismic Rehabilitation of Buildings, Phase I","description":"\u003cp\u003eThe ATC-28 report, \u003cem\u003eDevelopment of Guidelines for Seismic Rehabilitation of Buildings, Phase I \u003c\/em\u003e(FEMA 237), was developed under a contract with the Federal Emergency Management Agency (FEMA) as the ATC-28 Project. (Published 1992, 150 pages)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eABSTRACT:\u003c\/strong\u003e This report identifies and provides resolutions for issues that will affect the development of guidelines for the seismic strengthening of existing buildings. Issues addressed include: implementation and format, coordination with other efforts, legal and political, social, economic, historic buildings, research and technology, seismicity and mapping, engineering philosophy and goals, issues related to the development of specific provisions, and nonstructural element issues.\u003c\/p\u003e\u003cp\u003eAvailable free of charge by contacting FEMA (phone: 1-800-480-2520). \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eClick \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/ATC-28-toc.pdf?v=1783550355\" target=\"_blank\"\u003ehere\u003c\/a\u003e to view the Title Page, Preface, and Contents.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Applied Technology Council","offers":[{"title":"Default Title","offer_id":48162042839252,"sku":"ATC-28","price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/ATC28FEMA237cover.jpg?v=1782184326"},{"product_id":"proceedings-of-a-seminar-and-workshop-on-seismic-design-and-performance-of-equipment-and-nonstructural-elements-in-buildings-and-industrial-structures","title":"Proceedings of a Seminar and Workshop on Seismic Design and Performance of Equipment and Nonstructural Elements in Buildings and Industrial Structures","description":"\u003cp\u003eThe ATC-29 report,\u003cem\u003eProceedings of a Seminar and Workshop on Seismic Design and Performance of Equipment and Nonstructural Elements in Buildings and Industrial Structures\u003c\/em\u003e, was developed under a grant from the National Center for Earthquake Engineering Research (NCEER) and the National Science Foundation (NSF). (Published 1992, 470 pages)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eABSTRACT:\u003c\/strong\u003e These \u003cem\u003eProceedings \u003c\/em\u003econtain 35 papers describing state-of-the-art technical information pertaining to the seismic design and performance of equipment and nonstructural elements in buildings and industrial structures. The papers were presented at a seminar in Irvine, California in 1990. Included are papers describing current practice, codes and regulations, earthquake performance, analytical and experimental investigations, development of new seismic qualification methods, and research, practice, and code development needs for specific elements and systems. The report also includes a summary of a proposed 5-year research agenda for NCEER.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eClick \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/ATC-29TOC.pdf?v=1783550359\" target=\"_blank\"\u003ehere\u003c\/a\u003e to view the Title Page, Preface, and Contents.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Applied Technology Council","offers":[{"title":"Default Title","offer_id":48162042872020,"sku":"ATC-29","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/ATC29cover.jpg?v=1782184327"},{"product_id":"proceedings-of-seminar-on-seismic-design-retrofit-and-performance-of-nonstructural-components","title":"Proceedings of Seminar on Seismic Design, Retrofit, and Performance of Nonstructural Components","description":"\u003cp\u003eThe ATC-29-1 report, \u003cem\u003eProceedings of Seminar on Seismic Design, Retrofit, and Performance of Nonstructural Components\u003c\/em\u003e, was developed under a grant from the National Center for Earthquake Engineering Research (NCEER) and the National Science Foundation (NSF). (Published 1998, 518 pages)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eABSTRACT:\u003c\/strong\u003e These \u003cem\u003eProceedings \u003c\/em\u003econtain 38 technical papers presented at a seminar in San Francisco, California in 1998. The paper topics include: observed performance in recent earthquakes, seismic design codes, standards, and procedures for commercial and institutional buildings, seismic design issues relating to industrial and hazardous material facilities, design analysis, and testing, and seismic evaluation and rehabilitation of conventional and essential facilities, including hospitals.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eClick \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/ATC-29-1TOC.pdf?v=1783550363\" target=\"_blank\"\u003ehere\u003c\/a\u003e to view the Title Page, Preface, and Contents.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Applied Technology Council","offers":[{"title":"Default Title","offer_id":48162042904788,"sku":"ATC-29-1","price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/ATC29-1cover.jpg?v=1782184330"},{"product_id":"proceedings-seminar-on-seismic-design-performance-and-retrofit-of-nonstructural-components-in-critical-facilities","title":"Proceedings: Seminar on Seismic Design, Performance, and Retrofit of Nonstructural Components in Critical Facilities","description":"\u003cp\u003eThe report was developed under a grant from MCEER and NSF. (Published 2003, 574 pages)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eABSTRACT:\u003c\/strong\u003e These Proceedings contain 43 technical papers describing state-of-the-art technical information pertaining to the seismic design, performance and retrofit of nonstructural components in critical facilities, such as computer centers, hospitals, manufacturing plants with especially hazardous materials, and museums with fragile\/valuable collection items. The papers were presented at a seminar in Newport Beach, California in October, 2003. Topics addressed include: current practices and emerging codes; seismic design and retrofit; risk and performance evaluation; system qualification and testing; and advanced technologies.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClick \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/ATC-29-2.pdf?v=1783550368\" target=\"_blank\"\u003ehere\u003c\/a\u003e to view the Title Page, Preface, and Contents.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Applied Technology Council","offers":[{"title":"Default Title","offer_id":48162042937556,"sku":"ATC-29-2","price":65.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/ATC29-2.jpg?v=1782184331"},{"product_id":"proceedings-of-seminar-on-seismic-design-performance-and-retrofit-of-nonstructural-components-in-critical-facilities-in-pdf","title":"Proceedings of Seminar on Seismic Design, Performance, and Retrofit of Nonstructural Components in Critical Facilities in PDF","description":"\u003cp\u003eThe ATC-29-2 report,\u003cem\u003eProceedings of Seminar on Seismic Design, Performance, and Retrofit of Nonstructural Components in Critical Facilities\u003c\/em\u003e, is now available for download in PDF format. The report was developed under a grant from the Multidisciplinary Center for Earthquake Engineering Research (MCEER) and the National Science Foundation (NSF). (Published 2003, 574 pages)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eABSTRACT:\u003c\/strong\u003e These \u003cem\u003eProceedings \u003c\/em\u003econtain 43 technical papers describing state-of-the-art technical information pertaining to the seismic design, performance and retrofit of nonstructural components in critical facilities, such as computer centers, hospitals, manufacturing plants with especially hazardous materials, and museums with fragile\/valuable collection items. The papers were presented at a seminar in Newport Beach, California in October, 2003. Topics addressed include: current practices and emerging codes; seismic design and retrofit; risk and performance evaluation; system qualification and testing; and advanced technologies.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eClick \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/ATC-29-2_0e39c62b-8704-445b-920d-ef219c6ff26a.pdf?v=1783550372\" target=\"_blank\"\u003ehere\u003c\/a\u003e to view the Title Page, Preface, and Contents.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Applied Technology Council","offers":[{"title":"Default Title","offer_id":48162042970324,"sku":"ATC-29-2e","price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/ATC29-2CD.jpg?v=1782184333"},{"product_id":"proceedings-of-workshop-for-utilization-of-research-on-engineering-and-socioeconomic-aspects-of-the-1985-chile-and-mexico-earthquakes","title":"Proceedings of Workshop for Utilization of Research on Engineering and Socioeconomic Aspects of the 1985 Chile and Mexico Earthquakes","description":"\u003cp\u003eThe ATC-30 report,\u003cem\u003eProceedings of Workshop for Utilization of Research on Engineering and Socioeconomic Aspects of the 1985 Chile and Mexico Earthquakes,\u003c\/em\u003e was developed under a grant from the National Science Foundation (NSF). (Published 1991, 113 pages)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eABSTRACT:\u003c\/strong\u003e This report documents the findings of a 1990 technology transfer workshop in San Diego, California, co-sponsored by ATC and the Earthquake Engineering Research Institute (EERI). Included in the report are invited papers and working group recommendations on geotechnical issues, structural response issues, architectural and urban design considerations, emergency response planning, search and rescue, and reconstruction policy issues.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eClick \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/ATC-30TOC.pdf?v=1783550376\" target=\"_blank\"\u003ehere\u003c\/a\u003e to view the Title Page, Preface, and Contents.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Applied Technology Council","offers":[{"title":"Default Title","offer_id":48162043003092,"sku":"ATC-30","price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/ATC30cover.jpg?v=1782184335"},{"product_id":"evaluation-of-the-performance-of-seismically-retrofitted-buildings","title":"Evaluation of the Performance of Seismically Retrofitted Buildings","description":"\u003cp\u003eThe ATC-31 report, \u003cem\u003eEvaluation of the Performance of Seismically Retrofitted Buildings,\u003c\/em\u003e was developed under a contract from the National Institute of Standards and Technology (NIST, formerly NBS) and funded by the U. S. Geological Survey (USGS). (Published 1992, 75 pages)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eABSTRACT:\u003c\/strong\u003e This report summarizes the results from an investigation of the effectiveness of 229 seismically retrofitted buildings, primarily unreinforced masonry and concrete tilt-up buildings. All buildings were located in the areas affected by the 1987 Whittier Narrows, California, and 1989 Loma Prieta, California, earthquakes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eClick \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/ATC-31TOC.pdf?v=1783550380\" target=\"_blank\"\u003ehere\u003c\/a\u003e to view the Title Page, Preface, and Contents.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Applied Technology Council","offers":[{"title":"Default Title","offer_id":48162043035860,"sku":"ATC-31","price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/Cover31.jpg?v=1782184336"},{"product_id":"improved-seismic-design-criteria-for-california-bridges-provisional-recommendations","title":"Improved Seismic Design Criteria for California Bridges: Provisional Recommendations","description":"\u003cp\u003eThe ATC-32 report,\u003cem\u003e Improved Seismic Design Criteria for California Bridges: Provisional Recommendations\u003c\/em\u003e, was funded by the California Department of Transportation (Caltrans). (Published 1996, 215 pages)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eABSTRACT:\u003c\/strong\u003e This report provides recommended revisions to the current Caltrans Bridge Design Specifications (BDS) pertaining to seismic loading, structural response analysis, and component design. Special attention is given to design issues related to reinforced concrete components, steel components, foundations, and conventional bearings. The recommendations are based on recent research in the field of bridge seismic design and the performance of Caltrans-designed bridges in the 1989 Loma Prieta and other recent California earthquakes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eClick \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/ATC-32-toc.pdf?v=1783550384\" target=\"_blank\"\u003ehere\u003c\/a\u003e to view the Title Page, Preface, and Contents.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Applied Technology Council","offers":[{"title":"Default Title","offer_id":48162043068628,"sku":"ATC-32","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/ATC32-1cover.jpg?v=1782184338"},{"product_id":"improved-seismic-design-criteria-for-california-bridges-resource-document","title":"Improved Seismic Design Criteria for California Bridges: Resource Document","description":"\u003cp\u003eThe ATC-32-1 report,\u003cem\u003eImproved Seismic Design Criteria for California Bridges: Resource Document\u003c\/em\u003e, was funded by Caltrans. (Published 1996, 365 pages, paper format. Also available on CD-ROM; seeæ\u003ca href=\"component\/mijoshop\/product\/59-improved-seismic-design-criteria-for-california-bridges-resource-document-cd-rom\"\u003eATC-32-1CD\u003c\/a\u003e)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eABSTRACT:\u003c\/strong\u003e This report, a companion to the ATC-32 Report, documents pertinent background material and the technical basis for the recommendations provided in ATC-32, including potential recommendations that showed some promise but were not adopted. Topics include: design concepts, seismic loading, including ARS design spectra, dynamic analysis, foundation design, ductile component design, capacity protected design, reinforcing details, and steel bridges.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eClick \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/atc-32-1-toc.pdf?v=1783550388\" target=\"_blank\"\u003ehere\u003c\/a\u003e to view the Title Page, Preface, and Contents.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Applied Technology Council","offers":[{"title":"Default Title","offer_id":48162043134164,"sku":"ATC-32-1","price":65.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/4224\/4564\/files\/ATC32-1cover_vme3-2k.jpg?v=1782184340"}],"url":"https:\/\/store.atcouncil.org\/collections\/publications.oembed?page=2","provider":"The ATC Store","version":"1.0","type":"link"}