Publications

$25.00
Earthquake and Tsunami, Building Design, Pre-Disaster, Structural, Steel Buildings
The SAC-95-01 report, Steel Moment-Frame Connection Advisory No. 3 , was funded by the Federal Emergency Management Agency (FEMA) and the California Office...
In stock
+

Minimum quantity for "Steel Moment-Frame Connection Advisory No. 3" is 1.


$35.00
Structural, Steel Buildings, Pre-Disaster, Earthquake and Tsunami, Building Design
The SAC/BD-97/01, Through-Thickness Properties of Structural Steels , was funded by the Federal Emergency Management Agency (FEMA) and the California...
In stock
+

Minimum quantity for "Through-Thickness Properties of Structural Steels" is 1.


$25.00
Earthquake and Tsunami, Building Evaluation, Safety Evaluation, Post-Disaster, Proceedings
The ATC-30 report, Proceedings of Workshop for Utilization of Research on Engineering and Socioeconomic Aspects of the 1985 Chile and Mexico Earthquakes,...
In stock
+

Minimum quantity for "Proceedings of Workshop for Utilization of Research on Engineering and Socioeconomic Aspects of the 1985 Chile and Mexico Earthquakes" is 1.


$25.00
Earthquake and Tsunami, Building Design, Post-Disaster, Safety Evaluation

This report describes the performance of structural and nonstructural systems in the 2014 South Napa earthquake.

In stock
+

Minimum quantity for "FEMA P-1024, Performance of Buildings and Nonstructural Components in the 2014 South Napa Earthquake" is 1.


$25.00
Building Design, Pre-Disaster, Earthquake and Tsunami, Concrete Buildings, Structural

The report documents a study to evaluate whether using reinforcement with yield strength greater than 60 ksi in structural members that resist earthquake forces is appropriate in the United States

In stock
+

Minimum quantity for "Use of High-Strength Reinforcement in Earthquake-Resistant Concrete Structures" is 1.


$10.00
Earthquake and Tsunami, Building Design, Pre-Disaster, Structural, Technical Brief
The NEHRP Seismic Design Technical Brief No. 9:  Seismic Design of Special Reinforced Masonry Shear Walls , A Guide for Practicing Engineers was...
In stock
+

Minimum quantity for "NEHRP Seismic Design Technical Brief No. 9: Seismic Design of Special Reinforced Masonry Shear Walls" is 1.


$25.00
Structural, Research Reports, Pre-Disaster, Earthquake and Tsunami, Building Design
The ATC-53 report, Assessment of the NIST 12-Million-Pound (53 MN) Large-Scale Testing Facility, was developed under a contract with the National...
In stock
+

Minimum quantity for "Assessment of the NIST 12-Million-Pound (53 MN) Large-Scale Testing Facility" is 1.


$30.00
Building Design, Earthquake and Tsunami, Pre-Disaster
The ATC-34 report, A Critical Review of Current Approaches to Earthquake Resistant Design, was developed under a grant from National Center for Earthquake...
In stock
+

Minimum quantity for "A Critical Review of Current Approaches to Earthquake Resistant Design" is 1.


$10.00
Earthquake and Tsunami, Building Design, Pre-Disaster, Structural, Technical Brief
The NEHRP Seismic Design Technical Brief No. 10: Seismic Design of Wood Light-Frame Structural Diaphragm Systems , A Guide for Practicing Engineers was...
In stock
+

Minimum quantity for "NEHRP Seismic Design Technical Brief No. 10: Seismic Design of Wood Light-Frame Structural Diaphragm Systems, A Guide for Practicing Engineers" is 1.


$90.00
Pre-Disaster, Earthquake and Tsunami, Building Design, Steel Buildings, Structural
The SAC/BD-99/01A, Appendix to: Parametric Study on the Effect of Ground Motion Intensity and Dynamic Characteristics on Seismic Demands in Steel Moment...
In stock
+

Minimum quantity for "Appendix to: Parametric Study on the Effect of Ground Motion Intensity and Dynamic Characteristics on Seismic Demands in Steel Moment Resisting Frames" is 1.


$25.00
Earthquake and Tsunami, Building Design, Pre-Disaster, Structural, Steel Buildings
**FREE FOR DOWNLOAD**  An electronic copy of this report is available from the  FEMA library . The ATC-41e (FEMA 354) report, A Policy Guide to...
In stock
+

Minimum quantity for "FEMA 354, A Policy Guide to Steel Moment-Frame Construction" is 1.


$48.00
Building Design, Earthquake and Tsunami, Pre-Disaster, Steel Buildings, Structural
The SAC-95-07 report, Case Studies of Steel Moment Frame Building Performance in the Northridge Earthquake of January 17, 1994,  was funded by the...
In stock
+

Minimum quantity for "Case Studies of Steel Moment Frame Building Performance in the Northridge Earthquake of January 17, 1994" is 1.


$65.00
Structural, Steel Buildings, Pre-Disaster, Earthquake and Tsunami, Building Design
The SAC-95-06 report, Surveys and Assessment of Damage to Buildings Affected by the Northridge Earthquake of January 17, 1994 , was funded by the Federal...
In stock
+

Minimum quantity for "Surveys and Assessment of Damage to Buildings Affected by the Northridge Earthquake of January 17, 1994" is 1.


$37.50
Pre-Disaster, Earthquake and Tsunami, Building Design, Steel Buildings, Structural
The SAC/BD-99/12, Assessment of the Benefits of Implementing the New Seismic Design Criteria and Inspection Procedures , was funded by the Federal...
In stock
+

Minimum quantity for "Assessment of the Benefits of Implementing the New Seismic Design Criteria and Inspection Procedures" is 1.


$25.00
Earthquake and Tsunami, Building Design, Building Evaluation, Pre-Disaster, Structural Evaluation

This report documents the technical basis for the rapid visual screening procedure described in FEMA P-154.

On backorder
+

Minimum quantity for "FEMA P-155, Rapid Visual Screening of Buildings for Potential Seismic Hazards: Supporting Documentation (Third Edition)" is 1.


$20.00
Structural, Pre-Disaster, Earthquake and Tsunami, Building Design, Wood-Frame Buildings
The ATC-4-1 report, The Home Builders Guide for Earthquake Design, was published under a contract with the Department of Housing and Urban Development...
In stock
+

Minimum quantity for "The Home Builders Guide for Earthquake Design" is 1.


$40.00
Structural, Steel Buildings, Pre-Disaster, Earthquake and Tsunami, Building Design
The SAC/BD-99/02, Through-Thickness Strength and Ductility of Column Flanges in Moment Connections , was funded by the Federal Emergency Management Agency...
In stock
+

Minimum quantity for "Through-Thickness Strength and Ductility of Column Flanges in Moment Connections" is 1.


$25.00
Structural, Steel Buildings, Pre-Disaster, Earthquake and Tsunami, Building Design
The SAC-95-09 report, Background Reports: Metallurgy, Fracture Mechanics, Welding, Moment Connections and Frame Systems Behavior (FEMA 288) , was funded by...

Minimum quantity for "FEMA 288, Background Reports: Metallurgy, Fracture Mechanics, Welding, Moment Connections and Frame Systems Behavior" is 1.


$37.50
Structural, Steel Buildings, Pre-Disaster, Earthquake and Tsunami, Building Design
The SAC/BD-99/24, Weld Acceptance Criteria for Seismically-Loaded Welded Connection s , was funded by the Federal Emergency Management Agency (FEMA) and...
In stock
+

Minimum quantity for "Weld Acceptance Criteria for Seismically-Loaded Welded Connections" is 1.


$55.00
Earthquake and Tsunami, Building Design, Pre-Disaster, Steel Buildings, Structural
The SAC/BD-00/17, Behavior and Design of Radius Cut Reduced Beam Section Connections , was funded by the Federal Emergency Management Agency (FEMA) and the...
In stock
+

Minimum quantity for "Behavior and Design of Radius Cut Reduced Beam Section Connections" is 1.


$45.00
Earthquake and Tsunami, Building Design, Pre-Disaster, Structural, Steel Buildings
The ATC-41j (FEMA 355E) report, State of the Art Report on Past Performance of Steel Moment-Frame Buildings in Earthquakes , was funded by the Federal...
In stock
+

Minimum quantity for "FEMA 355E, State of the Art Report on Past Performance of Steel Moment-Frame Buildings in Earthquakes" is 1.


$40.00
Earthquake and Tsunami, Building Design, Pre-Disaster, Research Reports, Structural
The ATC-57 report, The Missing Piece: Improving Seismic Design and Construction Practices , was funded by the National Institute of Standards and...
In stock
+

Minimum quantity for "The Missing Piece: Improving Seismic Design and Construction Practices" is 1.


$37.50
Building Design, Pre-Disaster, Earthquake and Tsunami, Steel Buildings, Structural
The SAC/BD-97/02, Protocol for Fabrication, Inspection, Testing and Documentation of Beam-Column Connection Tests and Other Experimental Specimens , was...
In stock
+

Minimum quantity for "Protocol for Fabrication, Inspection, Testing and Documentation of Beam-Column Connection Tests and Other Experimental Specimens" is 1.


$25.00
Earthquake and Tsunami, Building Design, Pre-Disaster, Structural, Research Reports
The Applicability of Nonlinear Multiple-Degree-of-Freedom Modeling for Design report was produced under contract to the National Institute of Standards...
In stock
+

Minimum quantity for "Applicability of Nonlinear Multiple-Degree-of-Freedom Modeling for Design" is 1.