Publications

$25.00
Earthquake and Tsunami, Building Design, Pre-Disaster, Structural, Research Reports
The ATC-24 report, Guidelines for Seismic Testing of Components of Steel Structures , was jointly funded by the American Iron and Steel Institute (AISI),...
In stock
+

Minimum quantity for "Guidelines for Seismic Testing of Components of Steel Structures" is 1.


$36.00
Building Design, Pre-Disaster, Earthquake and Tsunami, Structural
The ATC-7 report, Guidelines for the Design of Horizontal Wood Diaphragms , was published under a grant from the National Science Foundation (NSF)....
In stock
+

Minimum quantity for "Guidelines for the Design of Horizontal Wood Diaphragms" is 1.


$75.00

An electronic copy of Guidelines for the Seismic Retrofit of Existing Schools and Design of New Schools in the Republic of Armenia can be downloaded from the More Info tab.

In stock
+

$48.00
Earthquake and Tsunami, Building Evaluation, Safety Evaluation, Post-Disaster
The ATC-54 report, Guidelines for Using Strong-Motion Data and Shakemaps in Postearthquake Response, was funded by the California Strong Motion...
In stock
+

Minimum quantity for "Guidelines for Using Strong-Motion Data and Shakemaps in Postearthquake Response" is 1.


$25.00
Research, Post-Disaster, Extreme Wind, Coastal Inundation
The ATC-44 report, Hurricane Fran, North Carolina, September 5, 1996: Reconnaissance Report, was funded by the Applied Technology Council. (Published...
In stock
+

Minimum quantity for "Hurricane Fran, North Carolina, September 5, 1996: Reconnaissance Report" is 1.


$40.00
Earthquake and Tsunami, Bridges & Lifelines, Bridge Design and Retrofit
The ATC-18-1 report, Impact Assessment of Selected MCEER Highway Project Research on the Seismic Design of Highway Structures , was developed under a...
In stock
+

Minimum quantity for "Impact Assessment of Selected MCEER Highway Project Research on the Seismic Design of Highway Structures" is 1.


$37.50
Structural, Steel Buildings, Pre-Disaster, Earthquake and Tsunami, Building Design
The SAC/BD-98/03, Implementation Issues for Improved Seismic Design Criteria: Report on the Social, Economic, Policy and Political Issues Workshop , was...
In stock
+

Minimum quantity for "Implementation Issues for Improved Seismic Design Criteria: Report on the Social, Economic, Policy and Political Issues Workshop" is 1.


$45.00
Earthquake and Tsunami, Bridges & Lifelines, Bridge Design and Retrofit
The ATC-32 report, Improved Seismic Design Criteria for California Bridges: Provisional Recommendations , was funded by the California Department of...
In stock
+

Minimum quantity for "Improved Seismic Design Criteria for California Bridges: Provisional Recommendations" is 1.


$65.00
Earthquake and Tsunami, Bridges & Lifelines, Bridge Design and Retrofit
The ATC-32-1 report, Improved Seismic Design Criteria for California Bridges: Resource Document , was funded by Caltrans. (Published 1996, 365 pages, paper...
In stock
+

Minimum quantity for "Improved Seismic Design Criteria for California Bridges: Resource Document" is 1.


$32.50
Earthquake and Tsunami, Bridges & Lifelines, Bridge Design and Retrofit
The ATC-32-1 report, Improved Seismic Design Criteria for California Bridges: Resource Document , is now available in electronic pdf format on USB. The...
In stock
+

Minimum quantity for "Improved Seismic Design Criteria for California Bridges: Resource Document -- USB" is 1.


$40.00
Structural, Steel Buildings, Pre-Disaster, Earthquake and Tsunami, Building Design
The SAC/BD-00/20, Improvement of Welded Connections Using Fracture Tough Overlays , was funded by the Federal Emergency Management Agency (FEMA) and the...
In stock
+

Minimum quantity for "Improvement of Welded Connections Using Fracture Tough Overlays" is 1.


$45.00
Earthquake and Tsunami, Building Design, Pre-Disaster, Structural - General
The ATC-75 Report, Improvements to BIM Structural Software Interoperability , was developed under a Research Grant from the Charles Pankow Foundation....
In stock
+

Minimum quantity for "Improvements to BIM Structural Software Interoperability" is 1.


$35.00
Earthquake and Tsunami, Building Design, Pre-Disaster, Structural, Steel Buildings
The SAC/BD-00/29, Inspection Technology Workshop , was funded by the Federal Emergency Management Agency (FEMA) and the California Office of Emergency...
In stock
+

Minimum quantity for "Inspection Technology Workshop" is 1.


$45.00
Building Design, Earthquake and Tsunami, Pre-Disaster, Steel Buildings, Structural
The SAC/BD-99/15, Integrative Analytical Investigations on the Fracture Behavior of Welded Moment Resisting Connections , was funded by the Federal...
In stock
+

Minimum quantity for "Integrative Analytical Investigations on the Fracture Behavior of Welded Moment Resisting Connections" is 1.


$25.00
Earthquake and Tsunami, Building Design, Pre-Disaster, Structural, Steel Buildings
The SAC-95-02 report, Interim Guidelines: Evaluation, Repair, Modification and Design of Welded Steel Moment-Frame Structures (FEMA 267), was funded by the...
In stock
+

Minimum quantity for "Interim Guidelines: Evaluation, Repair, Modification and Design of Welded Steel Moment-Frame Structures" is 1.


$35.00
Earthquake and Tsunami, Building Design, Steel Buildings, Pre-Disaster, Structural
The SAC/BD-99/09, Investigation of Damage to WSMF by Earthquakes Other Than Northridge , was funded by the Federal Emergency Management Agency (FEMA) and...
In stock
+

Minimum quantity for "Investigation of Damage to WSMF by Earthquakes Other Than Northridge" is 1.


$1.00
Earthquake and Tsunami, Ground Motion & Geo Tech Eng, Technical Brief
This publication, ATC TechBrief 1, Liquefaction Maps , was developed under a contract with the United States Geological Survey. (Published 1996, 12 pages)...
In stock
+

Minimum quantity for "Liquefaction Maps" is 1.


$50.00
Bridge Design and Retrofit, Bridges & Lifelines, Earthquake and Tsunami
The ATC-49-1 report, Liquefaction Study Report , was prepared by a joint venture partnership between ATC and the Multidisciplinary Center for Earthquake...
In stock
+

Minimum quantity for "Liquefaction Study Report Recommended LRFD Guidelines for the Seismic Design of Highway Bridges" is 1.


$10.00
Earthquake and Tsunami, Ground Motion & Geo Tech Eng
The ATC-AGI report, Living with Unstable Ground , was produced by the American Geological Institute (AGI), in cooperation with Applied Technology Council...
In stock
+

Minimum quantity for "Living with Unstable Ground" is 1.


$35.00
Pre-Disaster, Building Design, Earthquake and Tsunami, Steel Buildings, Structural
The SAC/BD-00/10, Loading Histories for Seismic Performance Testing of SMRF Components and Assemblies , was funded by the Federal Emergency Management...
In stock
+

Minimum quantity for "Loading Histories for Seismic Performance Testing of SMRF Components and Assemblies" is 1.


$35.00
Steel Buildings, Pre-Disaster, Building Design, Earthquake and Tsunami, Structural
The SAC/BD-99/20, Local and Lateral-Torsional Buckling of Wide-Flange Beams , was funded by the Federal Emergency Management Agency (FEMA) and the...
In stock
+

Minimum quantity for "Local and Lateral-Torsional Buckling of Wide-Flange Beams" is 1.


$25.00
Extreme Wind, Coastal Inundation, Research, Post-Disaster
Task Order 26 (ATC-100 Project) ,  Measurement Science R&D Roadmap for Windstorm and Coastal Inundation Impact Reduction .  The roadmap is...
In stock
+

Minimum quantity for "Measurement Science R&D Roadmap for Windstorm and Coastal Inundation Impact Reduction" is 1.


$40.00
Structural - General, Pre-Disaster, Earthquake and Tsunami, Building Design
The ATC Design Guide 1 report, Minimizing Floor Vibration , was developed with funding from ATC's Henry J. Degenkolb Memorial Endowment Fund. (Published,...
In stock
+

Minimum quantity for "Minimizing Floor Vibration" is 1.


$35.00
Earthquake and Tsunami, Building Design, Pre-Disaster, Structural - General
The ATC-72-1 report, Modeling and Acceptance Criteria for Seismic Design and Analysis of Tall Buildings , was developed under an agreement with the Pacific...
In stock
+

Minimum quantity for "Modeling and Acceptance Criteria for Seismic Design and Analysis of Tall Buildings" is 1.