Minimum quantity for "Natural Hazard Mitigation Saves: An Independent Study to Assess Future Savings from Mitigation Activities, Volume 2: Study Documentation" is 1.
Minimum quantity for "Field Manual: Post Flood and Wind Storm Safety Evaluation of Postal Buildings (Interim)" is 1.
Minimum quantity for "Next-Generation Performance-Based Seismic Design Guidelines" is 1.
Minimum quantity for "FEMA P-440A, Effects of Strength and Stiffness Degradation on Seismic Response" is 1.
Minimum quantity for "A Model Methodology for Assessment of Seismic Vulnerability and Impact of Disruption of Water Supply Systems" is 1.
Minimum quantity for "Natural Hazard Mitigation Saves: An Independent Study to Assess Future Savings from Mitigation Activities, Volume 1: Findings, Conclusions, and Recommendations" is 1.
Minimum quantity for "NEHRP Seismic Design Technical Brief No. 5: Seismic Design of Composite Steel Deck and Concrete-filled Diaphragms, A Guide for Practicing Engineers" is 1.
Minimum quantity for "NEHRP Seismic Design Technical Brief No. 6: Seismic Design of Cast-in-Place Concrete Special Structural Walls and Coupling Beams, A Guide for Practicing Engineers" is 1.
Minimum quantity for "Prediction of Seismic Demands for SMRFs with Ductile Connections and Elements" is 1.
Minimum quantity for "Building Safety Evaluation after the February 22, 2011 Christchurch, New Zealand Earthquake: Observations by the ATC Reconnaissance Team" is 1.
Minimum quantity for "Evaluation and Repair of Earthquake Damaged Concrete and Masonry Wall Buildings" is 1.
Minimum quantity for "Proceedings of the Invitational Workshop on Steel Seismic Issues" is 1.
Minimum quantity for "NEHRP-TB7, Seismic Design of Reinforced Concrete Mat Foundations: A Guide for Practicing Engineers" is 1.
Minimum quantity for "Evaluation of the FEMA P-695 Methodology for Quantification of Building Seismic Performance Factors" is 1.
Minimum quantity for "Field Manual: Postearthquake Safety Evaluation of Postal Buildings (Interim)" is 1.
Minimum quantity for "Elastic Models for Predicting Building Performance" is 1.
Minimum quantity for "FEMA P-795, Quantification of Building Seismic Performance Factors: Component Equivalency Methodology" is 1.
Minimum quantity for "Evaluation of Mechanical Properties in Full-Scale Connections and Recommended Minimum Weld Toughness for Moment Resisting Frames" is 1.
Minimum quantity for "Investigation of Damage to WSMF by Earthquakes Other Than Northridge" is 1.
Minimum quantity for "FEMA 155, Rapid Visual Screening of Buildings for Potential Seismic Hazards: Supporting Documentation (2nd Edition)" is 1.
Minimum quantity for "Program Plan for the Development of Collapse Assessment and Mitigation Strategies for Existing Reinforced Concrete Buildings" is 1.
Minimum quantity for "Seismic Design Criteria for Steel Moment-Frame Structures" is 1.
Minimum quantity for "Improvement of Welded Connections Using Fracture Tough Overlays" is 1.
Minimum quantity for "FEMA P-420, Engineering Guideline for Incremental Seismic Rehabilitation" is 1.
Minimum quantity for "General Acute Care Hospital Earthquake Survivability Inventory for California, Part A" is 1.
Minimum quantity for "FEMA 276, Example Applications of the NEHRP Guidelines for the Seismic Rehabilitation of Buildings" is 1.
Minimum quantity for "FEMA 274, NEHRP Commentary on the Guidelines for the Seismic Rehabilitation of Buildings" is 1.
Minimum quantity for "Rapid Visual Screening of Buildings for Potential Seismic Hazards Training Manual" is 1.
Minimum quantity for "Local and Lateral-Torsional Buckling of Wide-Flange Beams" is 1.
Minimum quantity for "NEHRP Seismic Design Technical Brief No. 12: Seismic Design of Cold-Formed Steel Lateral Load-Resisting Systems, A Guide for Practicing Engineers" is 1.
Minimum quantity for "FEMA 306, Evaluation of Earthquake-Damaged Concrete and Masonry Wall Buildings, Basic Procedures Manual" is 1.
Minimum quantity for "FEMA P-646, Guidelines for Design of Structures for Vertical Evacuation from Tsunamis (Second Edition)" is 1.
Minimum quantity for "FEMA 355D, State of the Art Report on Connection Performance" is 1.
Minimum quantity for "Parametric Study on the Effect of Ground Motion Intensity and Dynamic Characteristics on Seismic Demands in Steel Moment Resisting Frames" is 1.
Minimum quantity for "FEMA 389, Primer for Design Professionals: Communicating with Owners and Managers of New Buildings on Earthquake Risk" is 1.
Minimum quantity for "Database on the Performance of Structures near Strong-Motion Recordings: 1994 Northridge Earthquake" is 1.
Minimum quantity for "Effects of Strength/Toughness Mismatch on Structural and Fracture Behaviors in Weldments" is 1.
Minimum quantity for "Finite Element Fracture Mechanics Investigation of Welded Beam-Column Connections" is 1.
Minimum quantity for "FEMA P-695, Quantification of Building Seismic Performance Factors" is 1.
Minimum quantity for "Seismic Retrofitting Guidelines for Highway Bridges" is 1.
Minimum quantity for "Performance Prediction and Evaluation of Low Ductility Steel Moment Frames for Seismic Loads" is 1.
Minimum quantity for "Preliminary Assessment of the Impact of the Northridge Earthquake on Construction Costs of Steel Moment Frame Buildings" is 1.
Minimum quantity for "Reliability-Based Seismic Performance Evaluation of Steel Frame Buildings Using Nonlinear Static Analysis Methods" is 1.
Minimum quantity for "Integrative Analytical Investigations on the Fracture Behavior of Welded Moment Resisting Connections" is 1.
Minimum quantity for "Selecting and Scaling Earthquake Ground Motions for Performing Response-History Analyses" is 1.
Minimum quantity for "Cyclic Response of RBS Moment Connections: Weak-Axis Configuration and Deep Column Effects" is 1.
Minimum quantity for "Simplified Design Models for Predicting the Seismic Performance of Steel Moment Frame Connection" is 1.
Minimum quantity for "Evaluating the Seismic Resistance of Existing Buildings" is 1.