Earthquake and Tsunami

$37.50
Earthquake and Tsunami, Building Design, Steel Buildings, Structural, Pre-Disaster
The SAC/BD-00/13, Preliminary Evaluation of Heat Affected Zone Toughness in Structural Shapes used in the Construction of Seismic Moment Frames , was...
In stock
+

Minimum quantity for "Preliminary Evaluation of Heat Affected Zone Toughness in Structural Shapes used in the Construction of Seismic Moment Frames" is 1.


$35.00
Building Design, Pre-Disaster, Structural, Steel Buildings, Earthquake and Tsunami
The SAC/BD-00/29, Inspection Technology Workshop , was funded by the Federal Emergency Management Agency (FEMA) and the California Office of Emergency...
In stock
+

Minimum quantity for "Inspection Technology Workshop" is 1.


$40.00
Building Design, Pre-Disaster, Structural, Steel Buildings, Earthquake and Tsunami
The ATC-41f (FEMA 355A) report, State of the Art Report on Base Metals and Fracture , was funded by the Federal Emergency Management Agency (FEMA) and the...
In stock
+

Minimum quantity for "FEMA 355A, State of the Art Report on Base Metals and Fracture" is 1.


$50.00
Bridges & Lifelines, Bridge Design and Retrofit, Earthquake and Tsunami
The ATC-49-2 report, Design Examples, was prepared by a joint venture partnership between ATC and the Multidisciplinary Center for Earthquake Engineering...
In stock
+

Minimum quantity for "Design Examples Recommended LRFD Guidelines for the Seismic Design of Highway Bridges" is 1.


$35.00
Pre-Disaster, Building Design, Steel Buildings, Structural, Earthquake and Tsunami
The SAC/BD-98/02, Effects of Strain Hardening and Strain Aging on the K-Region of Structural Shapes , was funded by the Federal Emergency Management Agency...
In stock
+

Minimum quantity for "Effects of Strain Hardening and Strain Aging on the K-Region of Structural Shapes" is 1.


$50.00
Building Design, Pre-Disaster, Steel Buildings, Structural, Earthquake and Tsunami
The SAC/BD-00/23, Cyclic Response of RBS Moment Connections: Weak-Axis Configuration and Deep Column Effects , was funded by the Federal Emergency...
In stock
+

Minimum quantity for "Cyclic Response of RBS Moment Connections: Weak-Axis Configuration and Deep Column Effects" is 1.


$25.00
Earthquake and Tsunami, Pre-Disaster, Research Reports, Building Design
The ATC-73 report, NEHRP Workshop on Meeting the Challenges of Existing Buildings Prioritized Research for Reducing the Seismic Hazards of Existing...

Minimum quantity for "NEHRP Workshop on Meeting the Challenges of Existing Buildings Prioritized Research for Reducing the Seismic Hazards of Existing Buildings" is 1.


$25.00
Research Reports, Pre-Disaster, Nonstructural, Earthquake and Tsunami, Building Design, Structural
**FREE FOR DOWNLOAD**  An electronic copy of this report is available from the  FEMA library . The ATC-58b and ATC-58c (FEMA 461) report,...
In stock
+

Minimum quantity for "FEMA 461, Interim Testing Protocols for Determining the Seismic Performance Characteristics of Structural and Nonstructural Components" is 1.


$25.00
Building Design, Retrofit, Pre-Disaster, Earthquake and Tsunami
The ATC-28 report, Development of Guidelines for Seismic Rehabilitation of Buildings, Phase I (FEMA 237), was developed under a contract with the Federal...
In stock
+

Minimum quantity for "FEMA 237, Development of Guidelines for Seismic Rehabilitation of Buildings, Phase I" is 1.


$5.00
Building Evaluation, Safety Evaluation, Post-Disaster, Technical Brief, Earthquake and Tsunami
The ATC TechBrief 2, Earthquake Aftershocks -- Entering Damaged Buildings , was developed under a contract with the United States Geological Survey....
In stock
+

Minimum quantity for "Earthquake Aftershocks - Entering Damaged Buildings" is 1.


$40.00
Steel Buildings, Pre-Disaster, Earthquake and Tsunami, Building Design, Structural
The SAC/BD-00/12, Evaluation of the Effect of Welding Procedure on the Mechanical Properties of FCAW-S and SMAW Weld Metal used in the Construction of...
In stock
+

Minimum quantity for "Evaluation of the Effect of Welding Procedure on the Mechanical Properties of FCAW-S and SMAW Weld Metal used in the Construction of Seismic Moment Frames" is 1.


$40.00
Building Design, Pre-Disaster, Structural, Steel Buildings, Earthquake and Tsunami
The SAC/BD-99/07, Characterization of the Material Properties of Rolled Sections , was funded by the Federal Emergency Management Agency (FEMA) and the...
In stock
+

Minimum quantity for "Characterization of the Material Properties of Rolled Sections" is 1.