Buildings

$37.50
Structural, Steel Buildings, Pre-Disaster, Earthquake and Tsunami, Building Design
The SAC/BD-99/24, Weld Acceptance Criteria for Seismically-Loaded Welded Connection s , was funded by the Federal Emergency Management Agency (FEMA) and...
In stock
+

Minimum quantity for "Weld Acceptance Criteria for Seismically-Loaded Welded Connections" is 1.


$30.00
Building Design, Earthquake and Tsunami, Pre-Disaster
The ATC-34 report, A Critical Review of Current Approaches to Earthquake Resistant Design, was developed under a grant from National Center for Earthquake...
In stock
+

Minimum quantity for "A Critical Review of Current Approaches to Earthquake Resistant Design" is 1.


$20.00
Structural, Pre-Disaster, Earthquake and Tsunami, Building Design, Wood-Frame Buildings
The ATC-4-1 report, The Home Builders Guide for Earthquake Design, was published under a contract with the Department of Housing and Urban Development...
In stock
+

Minimum quantity for "The Home Builders Guide for Earthquake Design" is 1.


$10.00
Earthquake and Tsunami, Building Design, Pre-Disaster, Structural, Technical Brief
The NEHRP Seismic Design Technical Brief No. 10: Seismic Design of Wood Light-Frame Structural Diaphragm Systems , A Guide for Practicing Engineers was...
In stock
+

Minimum quantity for "NEHRP Seismic Design Technical Brief No. 10: Seismic Design of Wood Light-Frame Structural Diaphragm Systems, A Guide for Practicing Engineers" is 1.


$37.50
Building Design, Pre-Disaster, Earthquake and Tsunami, Steel Buildings, Structural
The SAC/BD-97/02, Protocol for Fabrication, Inspection, Testing and Documentation of Beam-Column Connection Tests and Other Experimental Specimens , was...
In stock
+

Minimum quantity for "Protocol for Fabrication, Inspection, Testing and Documentation of Beam-Column Connection Tests and Other Experimental Specimens" is 1.


$45.00
Earthquake and Tsunami, Building Design, Pre-Disaster, Structural, Steel Buildings
The ATC-41j (FEMA 355E) report, State of the Art Report on Past Performance of Steel Moment-Frame Buildings in Earthquakes , was funded by the Federal...
In stock
+

Minimum quantity for "FEMA 355E, State of the Art Report on Past Performance of Steel Moment-Frame Buildings in Earthquakes" is 1.


$40.00
Earthquake and Tsunami, Building Design, Pre-Disaster, Research Reports, Structural
The ATC-57 report, The Missing Piece: Improving Seismic Design and Construction Practices , was funded by the National Institute of Standards and...
In stock
+

Minimum quantity for "The Missing Piece: Improving Seismic Design and Construction Practices" is 1.


$25.00
Earthquake and Tsunami, Building Evaluation, Safety Evaluation, Post-Disaster, Proceedings
The ATC-30 report, Proceedings of Workshop for Utilization of Research on Engineering and Socioeconomic Aspects of the 1985 Chile and Mexico Earthquakes,...
In stock
+

Minimum quantity for "Proceedings of Workshop for Utilization of Research on Engineering and Socioeconomic Aspects of the 1985 Chile and Mexico Earthquakes" is 1.


$25.00
Earthquake and Tsunami, Building Design, Building Evaluation, Pre-Disaster, Structural Evaluation

This report documents the technical basis for the rapid visual screening procedure described in FEMA P-154.

On backorder
+

Minimum quantity for "FEMA P-155, Rapid Visual Screening of Buildings for Potential Seismic Hazards: Supporting Documentation (Third Edition)" is 1.


$55.00
Structural, Steel Buildings, Pre-Disaster, Earthquake and Tsunami, Building Design
The SAC/BD-00/04, Tests on Bolted Connections Part I: Technical Report , was funded by the Federal Emergency Management Agency (FEMA) and the California...
In stock
+

Minimum quantity for "Tests on Bolted Connections Part I: Technical Report" is 1.


$25.00
Earthquake and Tsunami, Building Design, Pre-Disaster, Structural, Research Reports
The Applicability of Nonlinear Multiple-Degree-of-Freedom Modeling for Design report was produced under contract to the National Institute of Standards...
In stock
+

Minimum quantity for "Applicability of Nonlinear Multiple-Degree-of-Freedom Modeling for Design" is 1.


$35.00
Building Design, Earthquake and Tsunami, Pre-Disaster, Steel Buildings, Structural
The SAC/BD-99/11, The Impact of Earthquakes on Welded Steel Moment Frame Buildings: Experience in Past Earthquakes , was funded by the Federal Emergency...
In stock
+

Minimum quantity for "The Impact of Earthquakes on Welded Steel Moment Frame Buildings: Experience in Past Earthquakes" is 1.