Minimum quantity for "An Evaluation of a Response Spectrum Approach to Seismic Design of Buildings" is 1.
Minimum quantity for "Redesign of Three Multistory Buildings: A Comparison Using ATC-3-06 and 1982 UBC Design Provisions" is 1.
Minimum quantity for "A Methodology for Seismic Design and Construction of Single-Family Dwellings" is 1.
Minimum quantity for "Seismic Resistance of Reinforced Concrete Shear Walls and Frame Joints: Implications of Recent Research for Design Engineers" is 1.
Minimum quantity for "Comparison of Seismic Design Practices in the United States and Japan" is 1.
Minimum quantity for "Proceedings of Second U.S.-Japan Workshop on Improvement of Building Seismic Design and Construction Practices" is 1.
Minimum quantity for "Proceedings of Third U.S.-Japan Workshop on Improvement of Building Structural Design and Construction Practices" is 1.
Minimum quantity for "Proceedings of Fourth U.S.-Japan Workshop on Improvement of Building Structural Design and Construction Practices" is 1.
Minimum quantity for "Proceedings of Fifth U.S.-Japan Workshop on Improvement of Building Structural Design and Construction Practices" is 1.
Minimum quantity for "Proceedings of a Seminar and Workshop on Base Isolation and Passive Energy Dissipation" is 1.
Minimum quantity for "Proceedings of Seminar on Seismic Isolation, Passive Energy Dissipation and Active Control" is 1.
Minimum quantity for "General Acute Care Hospital Earthquake Survivability Inventory for California, Part A" is 1.
Minimum quantity for "General Acute Care Hospital Earthquake Survivability Inventory for California, Part B" is 1.
Minimum quantity for "FEMA 237, Development of Guidelines for Seismic Rehabilitation of Buildings, Phase I" is 1.
Minimum quantity for "Proceedings: Seminar on Seismic Design, Performance, and Retrofit of Nonstructural Components in Critical Facilities" is 1.
Minimum quantity for "Proceedings of Workshop for Utilization of Research on Engineering and Socioeconomic Aspects of the 1985 Chile and Mexico Earthquakes" is 1.
Minimum quantity for "Built to Resist Earthquakes, The Path to Quality Seismic Design and Construction" is 1.
Minimum quantity for "Assessment of the NIST 12-Million-Pound (53 MN) Large-Scale Testing Facility" is 1.
Minimum quantity for "The Missing Piece: Improving Seismic Design and Construction Practices" is 1.
Minimum quantity for "FEMA 274, NEHRP Commentary on the Guidelines for the Seismic Rehabilitation of Buildings" is 1.
Minimum quantity for "FEMA 350, Recommended Seismic Design Criteria for New Steel Moment-Frame Buildings" is 1.
Minimum quantity for "FEMA 351, Recommended Seismic Evaluation and Upgrade Criteria for Existing Welded Steel Moment-Frame Buildings" is 1.
Minimum quantity for "FEMA 352, Recommended Postearthquake Evaluation and Repair Criteria for Welded Steel Moment-Frame Buildings" is 1.
Minimum quantity for "FEMA 353, Recommended Specifications and Quality Assurance Guidelines for Steel Moment-Frame Construction for Seismic Applications" is 1.
Minimum quantity for "FEMA 354, A Policy Guide to Steel Moment-Frame Construction" is 1.
Minimum quantity for "FEMA 355A, State of the Art Report on Base Metals and Fracture" is 1.
Minimum quantity for "FEMA 355B, State of the Art Report on Welding and Inspection" is 1.
Minimum quantity for "FEMA 355C, State of the Art Report on Systems Performance of Steel Moment Frames Subject to Earthquakes" is 1.
Minimum quantity for "FEMA 355D, State of the Art Report on Connection Performance" is 1.
Minimum quantity for "FEMA 355E, State of the Art Report on Past Performance of Steel Moment-Frame Buildings in Earthquakes" is 1.
Minimum quantity for "FEMA 355F, State of the Art Report on Performance Prediction and Evaluation of Steel Moment-Frame Structures" is 1.
Minimum quantity for "FEMA 356, Prestandard and Commentary for the Seismic Rehabilitation of Buildings" is 1.
Minimum quantity for "FEMA 440, Improvement of Nonlinear Static Seismic Analysis Procedures" is 1.
Minimum quantity for "Interim Guidelines: Evaluation, Repair, Modification and Design of Welded Steel Moment-Frame Structures" is 1.
Minimum quantity for "Characterization of Ground Motions During the Northridge Earthquake of January 17, 1994" is 1.
Minimum quantity for "Analytical and Field Investigations of Buildings Affected by the Northridge Earthquake of January 17, 1994" is 1.
Minimum quantity for "Surveys and Assessment of Damage to Buildings Affected by the Northridge Earthquake of January 17, 1994" is 1.
Minimum quantity for "Experimental Investigations of Materials, Weldments and Nondestructive Examination Techniques" is 1.
Minimum quantity for "FEMA 288, Background Reports: Metallurgy, Fracture Mechanics, Welding, Moment Connections and Frame Systems Behavior" is 1.
Minimum quantity for "Parametric Tests on Unreinforced Connections Volume II - Appendices" is 1.
Minimum quantity for "Parametric Tests on the Free Flange Connections" is 1.
Minimum quantity for "Cyclic Tests on Simple Connections, Including Effects of the Slab" is 1.
Minimum quantity for "Tests on Bolted Connections Part I: Technical Report" is 1.
Minimum quantity for "Tests on Bolted Connections Part II: Appendices" is 1.
Minimum quantity for "Round-Robin Testing of Ultrasonic Testing Technicians" is 1.
Minimum quantity for "Dynamic Tension Tests of Simulated Welded Beam Flange Connections" is 1.
Minimum quantity for "Benchmarking of Analysis Programs for SMRF System Performance Studies" is 1.
Minimum quantity for "Evaluation of the Effect of Welding Procedure on the Mechanical Properties of FCAW-S and SMAW Weld Metal used in the Construction of Seismic Moment Frames" is 1.
Minimum quantity for "Evaluation of Mechanical Properties in Full-Scale Connections and Recommended Minimum Weld Toughness for Moment Resisting Frames" is 1.
Minimum quantity for "Simplified Design Models for Predicting the Seismic Performance of Steel Moment Frame Connection" is 1.
Minimum quantity for "SAC Phase 2 Test Plan" is 1.
Minimum quantity for "Test of a Free Flange Connection with a Composite Floor Slab" is 1.
Minimum quantity for "Cyclic Testing of a Free Flange Moment Connection" is 1.
Minimum quantity for "Improvement of Welded Connections Using Fracture Tough Overlays" is 1.
Minimum quantity for "Cyclic Response of RBS Moment Connections: Loading Sequence and Lateral Bracing Effects" is 1.
Minimum quantity for "Cyclic Response of RBS Moment Connections: Weak-Axis Configuration and Deep Column Effects" is 1.
Minimum quantity for "Development and Evaluation of Improved Details for Ductile Welded Unreinforced Flange Connection" is 1.
Minimum quantity for "Performance Prediction and Evaluation of Steel Special Moment Frames for Seismic Loads" is 1.
Minimum quantity for "Performance Prediction and Evaluation of Low Ductility Steel Moment Frames for Seismic Loads" is 1.
Minimum quantity for "Cover-Plate and Flange-Plate Reinforced Steel Moment-Resisting Connections" is 1.
Minimum quantity for "Failure of a Column K-Area Fracture" is 1.
Minimum quantity for "Inspection Technology Workshop" is 1.
Minimum quantity for "Preliminary Assessment of the Impact of the Northridge Earthquake on Construction Costs of Steel Moment Frame Buildings" is 1.
Minimum quantity for "Selected Results from the SAC Phase 1 Beam-Column Connection Pre-Test Analyses" is 1.
Minimum quantity for "Selected Documents from the U.S.-Japan Workshop on Steel Fracture Issues" is 1.
Minimum quantity for "Survey of Computer Programs for the Analysis of Steel Moment Frame Structures" is 1.
Minimum quantity for "Proposed Statistical and Reliability Framework for Comparing and Evaluating Predictive Models for Evaluation and Design, and Critical Issues in Developing Such Framework" is 1.
Minimum quantity for "Strength and Ductility of FR Welded-Bolted Connections" is 1.
Minimum quantity for "Effects of Strain Hardening and Strain Aging on the K-Region of Structural Shapes" is 1.
Minimum quantity for "Implementation Issues for Improved Seismic Design Criteria: Report on the Social, Economic, Policy and Political Issues Workshop" is 1.
Minimum quantity for "Parametric Study on the Effect of Ground Motion Intensity and Dynamic Characteristics on Seismic Demands in Steel Moment Resisting Frames" is 1.
Minimum quantity for "Appendix to: Parametric Study on the Effect of Ground Motion Intensity and Dynamic Characteristics on Seismic Demands in Steel Moment Resisting Frames" is 1.
Minimum quantity for "Through-Thickness Strength and Ductility of Column Flanges in Moment Connections" is 1.
Minimum quantity for "The Effects of Connection Fractures on Steel Moment Resisting Frame Seismic Demands and Safety" is 1.
Minimum quantity for "Effects of Strength/Toughness Mismatch on Structural and Fracture Behaviors in Weldments" is 1.
Minimum quantity for "Assessment of the Reliability of Available NDE Methods for Welded Joints and the Development of UT Procedures" is 1.
Minimum quantity for "Characterization of the Material Properties of Rolled Sections" is 1.
Minimum quantity for "Study of the Material Properties of the Web-Flange Intersection of Rolled Shapes" is 1.
Minimum quantity for "Clarifying the Extent of Northridge-Induced Weld Fracturing; Examining the Related Issue of UT Reliability" is 1.
Minimum quantity for "The Impact of Earthquakes on Welded Steel Moment Frame Buildings: Experience in Past Earthquakes" is 1.
Minimum quantity for "Assessment of the Benefits of Implementing the New Seismic Design Criteria and Inspection Procedures" is 1.
Minimum quantity for "Earthquake Loss Estimation Methods for WSMF Buildings" is 1.
Minimum quantity for "Simplified Loss Estimation for Pre-Northridge WSMF Buildings" is 1.
Minimum quantity for "Integrative Analytical Investigations on the Fracture Behavior of Welded Moment Resisting Connections" is 1.
Minimum quantity for "Seismic Performance of 3 and 9 Story Partially Restrained Moment Frame Buildings" is 1.
Minimum quantity for "Effects of Hysteretic Deterioration Characteristics on Seismic Response of Moment Resisting Steel Structures" is 1.
Minimum quantity for "Cyclic Instability of Steel Moment Connections with Reduced Beam Sections" is 1.
Minimum quantity for "Local and Lateral-Torsional Buckling of Wide-Flange Beams" is 1.
Minimum quantity for "Elastic Models for Predicting Building Performance" is 1.
Minimum quantity for "Reliability-Based Seismic Performance Evaluation of Steel Frame Buildings Using Nonlinear Static Analysis Methods" is 1.
Minimum quantity for "Failure Analysis of Welded Steel Moment-Resisting Frame Connections Parts I and II" is 1.
Minimum quantity for "Seismic Design Criteria for Steel Moment-Frame Structures" is 1.
Minimum quantity for "SAC Training Presentations" is 1.
Minimum quantity for "Proceedings of the Invitational Workshop on Steel Seismic Issues" is 1.
Minimum quantity for "Cyclic Testing of Narrow Plywood Shear Walls" is 1.
Minimum quantity for "Seismic Rehabilitation Guidelines for Detached, Single-Family, Wood-Frame Dwellings" is 1.