Steel Buildings

$80.00
Earthquake and Tsunami, Building Design, Pre-Disaster, Structural, Steel Buildings
The SAC-95-04 report, Analytical and Field Investigations of Buildings Affected by the Northridge Earthquake of January 17, 1994 , was funded by the...

Minimum quantity for "Analytical and Field Investigations of Buildings Affected by the Northridge Earthquake of January 17, 1994" is 1.


$90.00
Pre-Disaster, Earthquake and Tsunami, Building Design, Steel Buildings, Structural
The SAC/BD-99/01A, Appendix to: Parametric Study on the Effect of Ground Motion Intensity and Dynamic Characteristics on Seismic Demands in Steel Moment...
In stock
+

Minimum quantity for "Appendix to: Parametric Study on the Effect of Ground Motion Intensity and Dynamic Characteristics on Seismic Demands in Steel Moment Resisting Frames" is 1.


$37.50
Pre-Disaster, Earthquake and Tsunami, Building Design, Steel Buildings, Structural
The SAC/BD-99/12, Assessment of the Benefits of Implementing the New Seismic Design Criteria and Inspection Procedures , was funded by the Federal...
In stock
+

Minimum quantity for "Assessment of the Benefits of Implementing the New Seismic Design Criteria and Inspection Procedures" is 1.


$40.00
Structural, Steel Buildings, Pre-Disaster, Earthquake and Tsunami, Building Design
The SAC/BD-99/05, Assessment of the Reliability of Available NDE Methods for Welded Joints and the Development of UT Procedures , was funded by the Federal...
In stock
+

Minimum quantity for "Assessment of the Reliability of Available NDE Methods for Welded Joints and the Development of UT Procedures" is 1.


$55.00
Earthquake and Tsunami, Building Design, Pre-Disaster, Steel Buildings, Structural
The SAC/BD-00/17, Behavior and Design of Radius Cut Reduced Beam Section Connections , was funded by the Federal Emergency Management Agency (FEMA) and the...
In stock
+

Minimum quantity for "Behavior and Design of Radius Cut Reduced Beam Section Connections" is 1.


$35.00
Earthquake and Tsunami, Pre-Disaster, Building Design, Steel Buildings, Structural
The SAC/BD-00/09, Benchmarking of Analysis Programs for SMRF System Performance Studies , was funded by the Federal Emergency Management Agency (FEMA) and...
In stock
+

Minimum quantity for "Benchmarking of Analysis Programs for SMRF System Performance Studies" is 1.


$45.00
Structural, Steel Buildings, Pre-Disaster, Earthquake and Tsunami, Building Design
The SAC/BD-00/05, Bolted Flange Plate Connections , was funded by the Federal Emergency Management Agency (FEMA) and the California Office of Emergency...
In stock
+

Minimum quantity for "Bolted Flange Plate Connections" is 1.


$48.00
Building Design, Earthquake and Tsunami, Pre-Disaster, Steel Buildings, Structural
The SAC-95-07 report, Case Studies of Steel Moment Frame Building Performance in the Northridge Earthquake of January 17, 1994,  was funded by the...
In stock
+

Minimum quantity for "Case Studies of Steel Moment Frame Building Performance in the Northridge Earthquake of January 17, 1994" is 1.


$35.00
Earthquake and Tsunami, Building Design, Pre-Disaster, Structural, Steel Buildings
The SAC-95-03 report, Characterization of Ground Motions During the Northridge Earthquake of January 17, 1994 , was funded by the Federal Emergency...
In stock
+

Minimum quantity for "Characterization of Ground Motions During the Northridge Earthquake of January 17, 1994" is 1.


$40.00
Earthquake and Tsunami, Building Design, Pre-Disaster, Structural, Steel Buildings
The SAC/BD-99/07, Characterization of the Material Properties of Rolled Sections , was funded by the Federal Emergency Management Agency (FEMA) and the...
In stock
+

Minimum quantity for "Characterization of the Material Properties of Rolled Sections" is 1.


$35.00
Building Design, Earthquake and Tsunami, Pre-Disaster, Steel Buildings, Structural
The SAC/BD-99/10, Clarifying the Extent of Northridge-Induced Weld Fracturing; Examining the Related Issue of UT Reliability , was funded by the Federal...
In stock
+

Minimum quantity for "Clarifying the Extent of Northridge-Induced Weld Fracturing; Examining the Related Issue of UT Reliability" is 1.


$60.00
Earthquake and Tsunami, Building Design, Pre-Disaster, Structural, Steel Buildings
The SAC/BD-00/27, Cover-Plate and Flange-Plate Reinforced Steel Moment-Resisting Connections , was funded by the Federal Emergency Management Agency (FEMA)...
In stock
+

Minimum quantity for "Cover-Plate and Flange-Plate Reinforced Steel Moment-Resisting Connections" is 1.


$35.00
Pre-Disaster, Earthquake and Tsunami, Building Design, Steel Buildings, Structural
The SAC/BD-99/19, Cyclic Instability of Steel Moment Connections with Reduced Beam Sections , was funded by the Federal Emergency Management Agency (FEMA)...
In stock
+

Minimum quantity for "Cyclic Instability of Steel Moment Connections with Reduced Beam Sections" is 1.


$40.00
Structural, Steel Buildings, Pre-Disaster, Earthquake and Tsunami, Building Design
The SAC/BD-00/22, Cyclic Response of RBS Moment Connections: Loading Sequence and Lateral Bracing Effects , was funded by the Federal Emergency Management...
In stock
+

Minimum quantity for "Cyclic Response of RBS Moment Connections: Loading Sequence and Lateral Bracing Effects" is 1.


$50.00
Earthquake and Tsunami, Building Design, Pre-Disaster, Steel Buildings, Structural
The SAC/BD-00/23, Cyclic Response of RBS Moment Connections: Weak-Axis Configuration and Deep Column Effects , was funded by the Federal Emergency...
In stock
+

Minimum quantity for "Cyclic Response of RBS Moment Connections: Weak-Axis Configuration and Deep Column Effects" is 1.


$35.00
Earthquake and Tsunami, Building Design, Steel Buildings, Pre-Disaster, Structural
The SAC/BD-00/19, Cyclic Testing of a Free Flange Moment Connection , was funded by the Federal Emergency Management Agency (FEMA) and the California...
In stock
+

Minimum quantity for "Cyclic Testing of a Free Flange Moment Connection" is 1.


$60.00
Earthquake and Tsunami, Building Design, Steel Buildings, Pre-Disaster, Structural
The SAC/BD-00/21, Cyclic Testing of Bolted Moment End-Plate Connections , was funded by the Federal Emergency Management Agency (FEMA) and the California...
In stock
+

Minimum quantity for "Cyclic Testing of Bolted Moment End-Plate Connections" is 1.


$50.00
Structural, Steel Buildings, Pre-Disaster, Earthquake and Tsunami, Building Design
The SAC/BD-00/03, Cyclic Tests on Simple Connections, Including Effects of the Slab , was funded by the Federal Emergency Management Agency (FEMA) and the...
In stock
+

Minimum quantity for "Cyclic Tests on Simple Connections, Including Effects of the Slab" is 1.


$70.00
Earthquake and Tsunami, Building Design, Pre-Disaster, Steel Buildings, Structural
The SAC/BD-00/24, Development and Evaluation of Improved Details for Ductile Welded Unreinforced Flange Connection , was funded by the Federal Emergency...
In stock
+

Minimum quantity for "Development and Evaluation of Improved Details for Ductile Welded Unreinforced Flange Connection" is 1.


$35.00
Earthquake and Tsunami, Pre-Disaster, Building Design, Steel Buildings, Structural
The SAC/BD-97/04, Development of Ground Motion Time Histories for Phase 2 of the FEMA/SAC Steel Project , was funded by the Federal Emergency Management...
In stock
+

Minimum quantity for "Development of Ground Motion Time Histories for Phase 2 of the FEMA/SAC Steel Project" is 1.


$35.00
Structural, Steel Buildings, Pre-Disaster, Earthquake and Tsunami, Building Design
The SAC/BD-00/07, Dynamic Tension Tests of Simulated Welded Beam Flange Connections , was funded by the Federal Emergency Management Agency (FEMA) and the...
In stock
+

Minimum quantity for "Dynamic Tension Tests of Simulated Welded Beam Flange Connections" is 1.


$35.00
Steel Buildings, Pre-Disaster, Earthquake and Tsunami, Building Design, Structural
The SAC/BD-99/13, Earthquake Loss Estimation Methods for WSMF Buildings , was funded by the Federal Emergency Management Agency (FEMA) and the California...
In stock
+

Minimum quantity for "Earthquake Loss Estimation Methods for WSMF Buildings" is 1.


$40.00
Steel Buildings, Pre-Disaster, Earthquake and Tsunami, Building Design, Structural
The SAC/BD-99/18, Effects of Hysteretic Deterioration Characteristics on Seismic Response of Moment Resisting Steel Structures , was funded by the Federal...
In stock
+

Minimum quantity for "Effects of Hysteretic Deterioration Characteristics on Seismic Response of Moment Resisting Steel Structures" is 1.


$40.00
Building Design, Earthquake and Tsunami, Pre-Disaster, Steel Buildings, Structural
The SAC/BD-99/17, Effects of Partially Restrained Connection Stiffness and Strength on Frame Seismic Performance , was funded by the Federal Emergency...
In stock
+

Minimum quantity for "Effects of Partially Restrained Connection Stiffness and Strength on Frame Seismic Performance" is 1.


$35.00
Earthquake and Tsunami, Pre-Disaster, Building Design, Steel Buildings, Structural
The SAC/BD-98/02, Effects of Strain Hardening and Strain Aging on the K-Region of Structural Shapes , was funded by the Federal Emergency Management Agency...
In stock
+

Minimum quantity for "Effects of Strain Hardening and Strain Aging on the K-Region of Structural Shapes" is 1.


$40.00
Pre-Disaster, Earthquake and Tsunami, Building Design, Steel Buildings, Structural
The SAC/BD-99/04, Effects of Strength/Toughness Mismatch on Structural and Fracture Behaviors in Weldments , was funded by the Federal Emergency Management...
In stock
+

Minimum quantity for "Effects of Strength/Toughness Mismatch on Structural and Fracture Behaviors in Weldments" is 1.


$75.00
Pre-Disaster, Earthquake and Tsunami, Building Design, Steel Buildings, Structural
The SAC/BD-99/21, Elastic Models for Predicting Building Performance , was funded by the Federal Emergency Management Agency (FEMA) and the California...
In stock
+

Minimum quantity for "Elastic Models for Predicting Building Performance" is 1.


$55.00
Structural, Steel Buildings, Pre-Disaster, Earthquake and Tsunami, Building Design
The SAC/BD-00/14, Evaluation of Mechanical Properties in Full-Scale Connections and Recommended Minimum Weld Toughness for Moment Resisting Frames , was...
In stock
+

Minimum quantity for "Evaluation of Mechanical Properties in Full-Scale Connections and Recommended Minimum Weld Toughness for Moment Resisting Frames" is 1.


$40.00
Structural, Steel Buildings, Pre-Disaster, Earthquake and Tsunami, Building Design
The SAC/BD-00/12, Evaluation of the Effect of Welding Procedure on the Mechanical Properties of FCAW-S and SMAW Weld Metal used in the Construction of...
In stock
+

Minimum quantity for "Evaluation of the Effect of Welding Procedure on the Mechanical Properties of FCAW-S and SMAW Weld Metal used in the Construction of Seismic Moment Frames" is 1.


$85.00
Pre-Disaster, Steel Buildings, Structural, Earthquake and Tsunami, Building Design
The SAC-96-01 report, Experimental Investigations of Beam-Column Subassemblages, Part 1 and 2 , was funded by the Federal Emergency Management Agency...
In stock
+

Minimum quantity for "Experimental Investigations of Beam-Column Subassemblages, Part 1 and 2" is 1.


$33.00
Earthquake and Tsunami, Steel Buildings, Structural, Pre-Disaster, Building Design
The SAC-95-08 report, Experimental Investigations of Materials, Weldments and Nondestructive Examination Techniques ,was funded by the Federal Emergency...
In stock
+

Minimum quantity for "Experimental Investigations of Materials, Weldments and Nondestructive Examination Techniques" is 1.


$45.00
Pre-Disaster, Building Design, Earthquake and Tsunami, Steel Buildings, Structural
The SAC/BD-99/23, Failure Analysis of Welded Steel Moment-Resisting Frame Connections Parts I and II , was funded by the Federal Emergency Management...
In stock
+

Minimum quantity for "Failure Analysis of Welded Steel Moment-Resisting Frame Connections Parts I and II" is 1.


$35.00
Earthquake and Tsunami, Building Design, Pre-Disaster, Structural, Steel Buildings
The SAC/BD-00/28, Failure of a Column K-Area Fracture , was funded by the Federal Emergency Management Agency (FEMA) and the California Office of Emergency...
In stock
+

Minimum quantity for "Failure of a Column K-Area Fracture" is 1.


$36.00
Structural, Steel Buildings, Pre-Disaster, Earthquake and Tsunami, Building Design
The SAC-99-01 report, Interim Guidelines Advisory No. 2 Supplement to FEMA-267 Interim Guidelines , is now available as FEMA 267B Report, superseding...
In stock
+

Minimum quantity for "FEMA 267B, Interim Guidelines Advisory No. 2 Supplement to FEMA-267 Interim Guidelines" is 1.


$25.00
Structural, Steel Buildings, Pre-Disaster, Earthquake and Tsunami, Building Design
The SAC-95-09 report, Background Reports: Metallurgy, Fracture Mechanics, Welding, Moment Connections and Frame Systems Behavior (FEMA 288) , was funded by...

Minimum quantity for "FEMA 288, Background Reports: Metallurgy, Fracture Mechanics, Welding, Moment Connections and Frame Systems Behavior" is 1.


$25.00
Structural, Steel Buildings, Pre-Disaster, Earthquake and Tsunami, Building Design
The SAC-96-02 report, Connection Test Summaries (FEMA 289), was funded by the Federal Emergency Management Agency (FEMA) and the California Office of...
In stock
+

Minimum quantity for "FEMA 289, Connection Test Summaries" is 1.


$25.00
Earthquake and Tsunami, Building Design, Pre-Disaster, Structural, Steel Buildings
The ATC-41a (FEMA 350) report, Recommended Seismic Design Criteria for New Steel Moment-Frame Buildings , was funded by the Federal Emergency Management...
In stock
+

Minimum quantity for "FEMA 350, Recommended Seismic Design Criteria for New Steel Moment-Frame Buildings" is 1.


$25.00
Earthquake and Tsunami, Building Design, Pre-Disaster, Structural, Steel Buildings
The ATC-41b (FEMA 351) report, Recommended Seismic Evaluation and Upgrade Criteria for Existing Welded Steel Moment-Frame Buildings , was funded by the...
In stock
+

Minimum quantity for "FEMA 351, Recommended Seismic Evaluation and Upgrade Criteria for Existing Welded Steel Moment-Frame Buildings" is 1.


$25.00
Earthquake and Tsunami, Building Design, Pre-Disaster, Structural, Steel Buildings
The ATC-41c (FEMA 352) report, Recommended Postearthquake Evaluation and Repair Criteria for Welded Steel Moment-Frame Buildings , was funded by the...
In stock
+

Minimum quantity for "FEMA 352, Recommended Postearthquake Evaluation and Repair Criteria for Welded Steel Moment-Frame Buildings" is 1.


$25.00
Earthquake and Tsunami, Building Design, Pre-Disaster, Structural, Steel Buildings
The ATC-41d (FEMA 353) report, Recommended Specifications and Quality Assurance Guidelines for Steel Moment-Frame Construction for Seismic Applications ,...
In stock
+

Minimum quantity for "FEMA 353, Recommended Specifications and Quality Assurance Guidelines for Steel Moment-Frame Construction for Seismic Applications" is 1.


$25.00
Earthquake and Tsunami, Building Design, Pre-Disaster, Structural, Steel Buildings
**FREE FOR DOWNLOAD**  An electronic copy of this report is available from the  FEMA library . The ATC-41e (FEMA 354) report, A Policy Guide to...
In stock
+

Minimum quantity for "FEMA 354, A Policy Guide to Steel Moment-Frame Construction" is 1.


$40.00
Earthquake and Tsunami, Building Design, Pre-Disaster, Structural, Steel Buildings
The ATC-41f (FEMA 355A) report, State of the Art Report on Base Metals and Fracture , was funded by the Federal Emergency Management Agency (FEMA) and the...
In stock
+

Minimum quantity for "FEMA 355A, State of the Art Report on Base Metals and Fracture" is 1.


$45.00
Earthquake and Tsunami, Building Design, Pre-Disaster, Structural, Steel Buildings
The ATC-41g (FEMA 355B) report, State of the Art Report on Welding and Inspection , was funded by the Federal Emergency Management Agency (FEMA) and the...
In stock
+

Minimum quantity for "FEMA 355B, State of the Art Report on Welding and Inspection" is 1.


$50.00
Earthquake and Tsunami, Building Design, Pre-Disaster, Structural, Steel Buildings
The ATC-41h (FEMA 355C) report, State of the Art Report on Systems Performance of Steel Moment Frames Subject to Earthquakes , was funded by the Federal...
In stock
+

Minimum quantity for "FEMA 355C, State of the Art Report on Systems Performance of Steel Moment Frames Subject to Earthquakes" is 1.


$50.00
Earthquake and Tsunami, Building Design, Pre-Disaster, Structural, Steel Buildings
The ATC-41i (FEMA 355D) report, State of the Art Report on Connection Performance , was funded by the Federal Emergency Management Agency (FEMA) and the...
In stock
+

Minimum quantity for "FEMA 355D, State of the Art Report on Connection Performance" is 1.


$45.00
Earthquake and Tsunami, Building Design, Pre-Disaster, Structural, Steel Buildings
The ATC-41j (FEMA 355E) report, State of the Art Report on Past Performance of Steel Moment-Frame Buildings in Earthquakes , was funded by the Federal...
In stock
+

Minimum quantity for "FEMA 355E, State of the Art Report on Past Performance of Steel Moment-Frame Buildings in Earthquakes" is 1.


$55.00
Earthquake and Tsunami, Building Design, Pre-Disaster, Structural, Steel Buildings
The ATC-41k (FEMA 355F) report, State of the Art Report on Performance Prediction and Evaluation of Steel Moment-Frame Structures , was funded by the...
In stock
+

Minimum quantity for "FEMA 355F, State of the Art Report on Performance Prediction and Evaluation of Steel Moment-Frame Structures" is 1.


$45.00
Pre-Disaster, Earthquake and Tsunami, Building Design, Steel Buildings, Structural
The SAC/BD-97/05, Finite Element Fracture Mechanics Investigation of Welded Beam-Column Connections , was funded by the Federal Emergency Management Agency...
In stock
+

Minimum quantity for "Finite Element Fracture Mechanics Investigation of Welded Beam-Column Connections" is 1.