Publications

$45.00
Structural, Steel Buildings, Pre-Disaster, Earthquake and Tsunami, Building Design
The SAC/BD-00/05, Bolted Flange Plate Connections , was funded by the Federal Emergency Management Agency (FEMA) and the California Office of Emergency...
In stock
+

Minimum quantity for "Bolted Flange Plate Connections" is 1.


$37.50
Pre-Disaster, Earthquake and Tsunami, Building Design, Steel Buildings, Structural
The SAC/BD-00/13, Preliminary Evaluation of Heat Affected Zone Toughness in Structural Shapes used in the Construction of Seismic Moment Frames , was...
In stock
+

Minimum quantity for "Preliminary Evaluation of Heat Affected Zone Toughness in Structural Shapes used in the Construction of Seismic Moment Frames" is 1.


$35.00
Structural, Steel Buildings, Pre-Disaster, Earthquake and Tsunami, Building Design
The SAC/BD-97/01, Through-Thickness Properties of Structural Steels , was funded by the Federal Emergency Management Agency (FEMA) and the California...
In stock
+

Minimum quantity for "Through-Thickness Properties of Structural Steels" is 1.


$60.00
Pre-Disaster, Earthquake and Tsunami, Building Design, Steel Buildings, Structural
The SAC/BD-99/06, Prediction of Seismic Demands for SMRFs with Ductile Connections and Elements , was funded by the Federal Emergency Management Agency...
In stock
+

Minimum quantity for "Prediction of Seismic Demands for SMRFs with Ductile Connections and Elements" is 1.


$40.00
Earthquake and Tsunami, Building Design, Pre-Disaster, Structural, Steel Buildings
The SAC/BD-99/17, Effects of Partially Restrained Connection Stiffness and Strength on Frame Seismic Performance , was funded by the Federal Emergency...
In stock
+

Minimum quantity for "Effects of Partially Restrained Connection Stiffness and Strength on Frame Seismic Performance" is 1.


$37.50
Earthquake and Tsunami, Building Design, Pre-Disaster, Structural, Steel Buildings
The SAC/BD-99/24, Weld Acceptance Criteria for Seismically-Loaded Welded Connection s , was funded by the Federal Emergency Management Agency (FEMA) and...
In stock
+

Minimum quantity for "Weld Acceptance Criteria for Seismically-Loaded Welded Connections" is 1.


$10.00
Earthquake and Tsunami, Ground Motion & Geo Tech Eng
The ATC-AGI report, Living with Unstable Ground , was produced by the American Geological Institute (AGI), in cooperation with Applied Technology Council...
In stock
+

Minimum quantity for "Living with Unstable Ground" is 1.


$30.00
Nonstructural, Pre-Disaster, Earthquake and Tsunami, Building Design
The ATC-74 report, Collaborative Recommended Requirements for Automatic Natural Gas Shutoff Valves in Italy, was funded by the Department of Civil...
In stock
+

Minimum quantity for "Collaborative Recommended Requirements for Automatic Natural Gas Shutoff Valves in Italy" is 1.


$55.00
Structural Evaluation, Proceedings, Pre-Disaster, Earthquake and Tsunami, Building Evaluation
The Italian version of the ATC-51-1 report, Raccomandazioni Congiunte Stati Uniti-Italia , was developed under a second contract with Servizio Sismico...
In stock
+

Minimum quantity for "Raccomandazioni Congiunte Stati Uniti-Italia" is 1.


$50.00
Terrorism, Building Evaluation
**FREE FOR DOWNLOAD**  An electronic copy of this report is available from the  FEMA library . The ATC-65 (FEMA 455) Report, Handbook for Rapid...
In stock
+

Minimum quantity for "FEMA 455, Handbook for Rapid Visual Screening of Buildings to Evaluate Terrorism Risks" is 1.


$25.00
Earthquake and Tsunami, Building Design, Pre-Disaster, Structural, Research Reports
The Applicability of Nonlinear Multiple-Degree-of-Freedom Modeling for Design report was produced under contract to the National Institute of Standards...
In stock
+

Minimum quantity for "Applicability of Nonlinear Multiple-Degree-of-Freedom Modeling for Design" is 1.


$45.00
Earthquake and Tsunami, Building Design, Structural - General, Pre-Disaster
The ATC-75 Report, Improvements to BIM Structural Software Interoperability , was developed under a Research Grant from the Charles Pankow Foundation....
In stock
+

Minimum quantity for "Improvements to BIM Structural Software Interoperability" is 1.