Earthquake and Tsunami

$25.00
Building Evaluation, Pre-Disaster, Structural Evaluation, Earthquake and Tsunami, Building Design

This report documents the technical basis for the rapid visual screening procedure described in FEMA P-154.

On backorder
+

Minimum quantity for "FEMA P-155, Rapid Visual Screening of Buildings for Potential Seismic Hazards: Supporting Documentation (Third Edition)" is 1.


$37.50
Building Design, Steel Buildings, Structural, Pre-Disaster, Earthquake and Tsunami
The SAC/BD-99/12, Assessment of the Benefits of Implementing the New Seismic Design Criteria and Inspection Procedures , was funded by the Federal...
In stock
+

Minimum quantity for "Assessment of the Benefits of Implementing the New Seismic Design Criteria and Inspection Procedures" is 1.


$20.00
Earthquake and Tsunami, Building Design, Wood-Frame Buildings, Structural, Pre-Disaster
The ATC-4-1 report, The Home Builders Guide for Earthquake Design, was published under a contract with the Department of Housing and Urban Development...
In stock
+

Minimum quantity for "The Home Builders Guide for Earthquake Design" is 1.


$40.00
Pre-Disaster, Earthquake and Tsunami, Building Design, Structural, Steel Buildings
The SAC/BD-99/02, Through-Thickness Strength and Ductility of Column Flanges in Moment Connections , was funded by the Federal Emergency Management Agency...
In stock
+

Minimum quantity for "Through-Thickness Strength and Ductility of Column Flanges in Moment Connections" is 1.


$25.00
Pre-Disaster, Earthquake and Tsunami, Building Design, Structural, Steel Buildings
The SAC-95-09 report, Background Reports: Metallurgy, Fracture Mechanics, Welding, Moment Connections and Frame Systems Behavior (FEMA 288) , was funded by...

Minimum quantity for "FEMA 288, Background Reports: Metallurgy, Fracture Mechanics, Welding, Moment Connections and Frame Systems Behavior" is 1.


$37.50
Pre-Disaster, Earthquake and Tsunami, Building Design, Structural, Steel Buildings
The SAC/BD-99/24, Weld Acceptance Criteria for Seismically-Loaded Welded Connection s , was funded by the Federal Emergency Management Agency (FEMA) and...
In stock
+

Minimum quantity for "Weld Acceptance Criteria for Seismically-Loaded Welded Connections" is 1.


$45.00
Pre-Disaster, Structural, Steel Buildings, Earthquake and Tsunami, Building Design
The ATC-41j (FEMA 355E) report, State of the Art Report on Past Performance of Steel Moment-Frame Buildings in Earthquakes , was funded by the Federal...
In stock
+

Minimum quantity for "FEMA 355E, State of the Art Report on Past Performance of Steel Moment-Frame Buildings in Earthquakes" is 1.


$55.00
Pre-Disaster, Steel Buildings, Structural, Earthquake and Tsunami, Building Design
The SAC/BD-00/17, Behavior and Design of Radius Cut Reduced Beam Section Connections , was funded by the Federal Emergency Management Agency (FEMA) and the...
In stock
+

Minimum quantity for "Behavior and Design of Radius Cut Reduced Beam Section Connections" is 1.


$40.00
Pre-Disaster, Research Reports, Structural, Earthquake and Tsunami, Building Design
The ATC-57 report, The Missing Piece: Improving Seismic Design and Construction Practices , was funded by the National Institute of Standards and...
In stock
+

Minimum quantity for "The Missing Piece: Improving Seismic Design and Construction Practices" is 1.


$37.50
Earthquake and Tsunami, Steel Buildings, Structural, Building Design, Pre-Disaster
The SAC/BD-97/02, Protocol for Fabrication, Inspection, Testing and Documentation of Beam-Column Connection Tests and Other Experimental Specimens , was...
In stock
+

Minimum quantity for "Protocol for Fabrication, Inspection, Testing and Documentation of Beam-Column Connection Tests and Other Experimental Specimens" is 1.


$25.00
Pre-Disaster, Structural, Research Reports, Earthquake and Tsunami, Building Design
The Applicability of Nonlinear Multiple-Degree-of-Freedom Modeling for Design report was produced under contract to the National Institute of Standards...
In stock
+

Minimum quantity for "Applicability of Nonlinear Multiple-Degree-of-Freedom Modeling for Design" is 1.


$25.00
Pre-Disaster, Structural, Research Reports, Earthquake and Tsunami, Building Design
The ATC-24 report, Guidelines for Seismic Testing of Components of Steel Structures , was jointly funded by the American Iron and Steel Institute (AISI),...
In stock
+

Minimum quantity for "Guidelines for Seismic Testing of Components of Steel Structures" is 1.