Minimum quantity for "Recommended U.S.-Italy Collaborative Procedures for Earthquake Emergency Response Planning for Hospitals in Italy" is 1.
Minimum quantity for "Guidelines for Using Strong-Motion Data and Shakemaps in Postearthquake Response" is 1.
Minimum quantity for "FEMA 308, The Repair of Earthquake Damaged Concrete and Masonry Wall Buildings" is 1.
Minimum quantity for "Parametric Analytical Investigations of Ground Motion and Structural Response, Northridge Earthquake of January 17, 1994" is 1.
Minimum quantity for "Case Studies of Steel Moment Frame Building Performance in the Northridge Earthquake of January 17, 1994" is 1.
Minimum quantity for "FEMA 289, Connection Test Summaries" is 1.
Minimum quantity for "FEMA 267B, Interim Guidelines Advisory No. 2 Supplement to FEMA-267 Interim Guidelines" is 1.
Minimum quantity for "Parametric Tests on Unreinforced Connections Volume I - Final Report" is 1.
Minimum quantity for "Bolted Flange Plate Connections" is 1.
Minimum quantity for "Preliminary Evaluation of Heat Affected Zone Toughness in Structural Shapes used in the Construction of Seismic Moment Frames" is 1.
Minimum quantity for "Through-Thickness Properties of Structural Steels" is 1.
Minimum quantity for "Finite Element Fracture Mechanics Investigation of Welded Beam-Column Connections" is 1.
Minimum quantity for "Prediction of Seismic Demands for SMRFs with Ductile Connections and Elements" is 1.
Minimum quantity for "Investigation of Damage to WSMF by Earthquakes Other Than Northridge" is 1.
Minimum quantity for "Effects of Partially Restrained Connection Stiffness and Strength on Frame Seismic Performance" is 1.
Minimum quantity for "Weld Acceptance Criteria for Seismically-Loaded Welded Connections" is 1.
Minimum quantity for "Collaborative Recommended Requirements for Automatic Natural Gas Shutoff Valves in Italy" is 1.
Minimum quantity for "Raccomandazioni Congiunte Stati Uniti-Italia" is 1.
Minimum quantity for "Applicability of Nonlinear Multiple-Degree-of-Freedom Modeling for Design" is 1.
Minimum quantity for "FEMA P-795, Quantification of Building Seismic Performance Factors: Component Equivalency Methodology" is 1.
Minimum quantity for "Natural Hazard Mitigation Saves: An Independent Study to Assess Future Savings from Mitigation Activities, Volume 1: Findings, Conclusions, and Recommendations" is 1.
Minimum quantity for "NEHRP-TB7, Seismic Design of Reinforced Concrete Mat Foundations: A Guide for Practicing Engineers" is 1.
Minimum quantity for "Improvements to BIM Structural Software Interoperability" is 1.
Minimum quantity for "NEHRP Seismic Design Technical Brief No. 10: Seismic Design of Wood Light-Frame Structural Diaphragm Systems, A Guide for Practicing Engineers" is 1.
Minimum quantity for "FEMA P-774, Unreinforced Masonry Buildings and Earthquakes, Developing Successful Risk Reduction Programs" is 1.
Minimum quantity for "Preliminary Evaluation of Methods for Defining Performance" is 1.
Minimum quantity for "Proceedings of FEMA-Sponsored Workshop on Performance-Based Design" is 1.
This report provides the proceedings of a workshop conducted in 2013 with stakeholders on the topic of the FEMA P-58 Seismic Performance Assessment of Buildings methodology and its implementation.
Minimum quantity for "Proceedings of FEMA-Sponsored Workshop on Communicating Seismic Performance Metrics in Design Decision-Making" is 1.
An electronic copy of Guidelines for the Seismic Retrofit of Existing Schools and Design of New Schools in the Republic of Armenia can be downloaded from the More Info tab.
Minimum quantity for "FEMA P-646, Guidelines for Design of Structures for Vertical Evacuation from Tsunamis, Third Edition" is 1.
Minimum quantity for "FEMA P-58-4, Seismic Performance Assessment of Buildings, Volume 4 – Methodology for Assessing Environmental Impacts" is 1.
Minimum quantity for "FEMA P-58-5, Seismic Performance Assessment of Buildings, Volume 5 – Expected Seismic Performance of Code-Conforming Buildings" is 1.
Minimum quantity for "FEMA P-58-7, Building the Performance You Need, A Guide to State-of-the Art Tools for Seismic Design and Assessment" is 1.
Minimum quantity for "An Evaluation of a Response Spectrum Approach to Seismic Design of Buildings" is 1.
Minimum quantity for "Redesign of Three Multistory Buildings: A Comparison Using ATC-3-06 and 1982 UBC Design Provisions" is 1.
Minimum quantity for "A Methodology for Seismic Design and Construction of Single-Family Dwellings" is 1.
Minimum quantity for "Proceedings of a Workshop on Earthquake Resistance of Highway Bridges" is 1.
Minimum quantity for "Seismic Retrofitting Guidelines for Highway Bridges" is 1.
Minimum quantity for "An Investigation of the Correlation Between Earthquake Ground Motion and Building Performance" is 1.
Minimum quantity for "Critical Aspects of Earthquake Ground Motion and Building Damage Potential" is 1.
Minimum quantity for "Seismic Resistance of Reinforced Concrete Shear Walls and Frame Joints: Implications of Recent Research for Design Engineers" is 1.
Minimum quantity for "Comparison of United States and New Zealand Seismic Design Practices for Highway Bridges" is 1.
Minimum quantity for "Proceedings of 2nd Joint U.S.-New Zealand Workshop on Seismic Resistance of Highway Bridges" is 1.
Minimum quantity for "Comparison of Seismic Design Practices in the United States and Japan" is 1.
Minimum quantity for "Proceedings of Second U.S.-Japan Workshop on Improvement of Building Seismic Design and Construction Practices" is 1.
Minimum quantity for "Proceedings of Third U.S.-Japan Workshop on Improvement of Building Structural Design and Construction Practices" is 1.
Minimum quantity for "Proceedings of Fourth U.S.-Japan Workshop on Improvement of Building Structural Design and Construction Practices" is 1.
Minimum quantity for "Proceedings of Fifth U.S.-Japan Workshop on Improvement of Building Structural Design and Construction Practices" is 1.
Minimum quantity for "Proceedings of a Seminar and Workshop on Base Isolation and Passive Energy Dissipation" is 1.
Minimum quantity for "Proceedings of Seminar on Seismic Isolation, Passive Energy Dissipation and Active Control" is 1.
Minimum quantity for "General Acute Care Hospital Earthquake Survivability Inventory for California, Part A" is 1.
Minimum quantity for "General Acute Care Hospital Earthquake Survivability Inventory for California, Part B" is 1.
Minimum quantity for "FEMA 237, Development of Guidelines for Seismic Rehabilitation of Buildings, Phase I" is 1.
Minimum quantity for "Proceedings: Seminar on Seismic Design, Performance, and Retrofit of Nonstructural Components in Critical Facilities" is 1.
Minimum quantity for "Proceedings of Seminar on Seismic Design, Performance, and Retrofit of Nonstructural Components in Critical Facilities" is 1.
Minimum quantity for "Proceedings of Workshop for Utilization of Research on Engineering and Socioeconomic Aspects of the 1985 Chile and Mexico Earthquakes" is 1.
Minimum quantity for "Enhancing the Transfer of U.S. Geological Survey Research Results into Engineering Practice" is 1.
Minimum quantity for "Proceedings of Seminar on New Developments in Earthquake Ground Motion Estimation and Implications for Engineering Design Practice" is 1.
Minimum quantity for "Proceedings of National Earthquake Ground Motion Mapping Workshop" is 1.
Minimum quantity for "Proceedings of Workshop on Improved Characterization of Strong Ground Shaking for Seismic Design" is 1.
Minimum quantity for "Built to Resist Earthquakes, The Path to Quality Seismic Design and Construction" is 1.
Minimum quantity for "Assessment of the NIST 12-Million-Pound (53 MN) Large-Scale Testing Facility" is 1.
Minimum quantity for "The Missing Piece: Improving Seismic Design and Construction Practices" is 1.
Minimum quantity for "FEMA 274, NEHRP Commentary on the Guidelines for the Seismic Rehabilitation of Buildings" is 1.
Minimum quantity for "FEMA 350, Recommended Seismic Design Criteria for New Steel Moment-Frame Buildings" is 1.
Minimum quantity for "FEMA 351, Recommended Seismic Evaluation and Upgrade Criteria for Existing Welded Steel Moment-Frame Buildings" is 1.
Minimum quantity for "FEMA 352, Recommended Postearthquake Evaluation and Repair Criteria for Welded Steel Moment-Frame Buildings" is 1.
Minimum quantity for "FEMA 353, Recommended Specifications and Quality Assurance Guidelines for Steel Moment-Frame Construction for Seismic Applications" is 1.
Minimum quantity for "FEMA 354, A Policy Guide to Steel Moment-Frame Construction" is 1.
Minimum quantity for "FEMA 355A, State of the Art Report on Base Metals and Fracture" is 1.
Minimum quantity for "FEMA 355B, State of the Art Report on Welding and Inspection" is 1.
Minimum quantity for "FEMA 355C, State of the Art Report on Systems Performance of Steel Moment Frames Subject to Earthquakes" is 1.
Minimum quantity for "FEMA 355D, State of the Art Report on Connection Performance" is 1.
Minimum quantity for "FEMA 355E, State of the Art Report on Past Performance of Steel Moment-Frame Buildings in Earthquakes" is 1.
Minimum quantity for "FEMA 355F, State of the Art Report on Performance Prediction and Evaluation of Steel Moment-Frame Structures" is 1.
Minimum quantity for "FEMA 356, Prestandard and Commentary for the Seismic Rehabilitation of Buildings" is 1.
Minimum quantity for "FEMA 440, Improvement of Nonlinear Static Seismic Analysis Procedures" is 1.
Minimum quantity for "Interim Guidelines: Evaluation, Repair, Modification and Design of Welded Steel Moment-Frame Structures" is 1.
Minimum quantity for "Characterization of Ground Motions During the Northridge Earthquake of January 17, 1994" is 1.
Minimum quantity for "Analytical and Field Investigations of Buildings Affected by the Northridge Earthquake of January 17, 1994" is 1.
Minimum quantity for "Surveys and Assessment of Damage to Buildings Affected by the Northridge Earthquake of January 17, 1994" is 1.
Minimum quantity for "Experimental Investigations of Materials, Weldments and Nondestructive Examination Techniques" is 1.
Minimum quantity for "FEMA 288, Background Reports: Metallurgy, Fracture Mechanics, Welding, Moment Connections and Frame Systems Behavior" is 1.
Minimum quantity for "Parametric Tests on Unreinforced Connections Volume II - Appendices" is 1.
Minimum quantity for "Parametric Tests on the Free Flange Connections" is 1.
Minimum quantity for "Cyclic Tests on Simple Connections, Including Effects of the Slab" is 1.
Minimum quantity for "Tests on Bolted Connections Part I: Technical Report" is 1.
Minimum quantity for "Tests on Bolted Connections Part II: Appendices" is 1.
Minimum quantity for "Round-Robin Testing of Ultrasonic Testing Technicians" is 1.
Minimum quantity for "Dynamic Tension Tests of Simulated Welded Beam Flange Connections" is 1.
Minimum quantity for "Benchmarking of Analysis Programs for SMRF System Performance Studies" is 1.
Minimum quantity for "Evaluation of the Effect of Welding Procedure on the Mechanical Properties of FCAW-S and SMAW Weld Metal used in the Construction of Seismic Moment Frames" is 1.
Minimum quantity for "Evaluation of Mechanical Properties in Full-Scale Connections and Recommended Minimum Weld Toughness for Moment Resisting Frames" is 1.
Minimum quantity for "Simplified Design Models for Predicting the Seismic Performance of Steel Moment Frame Connection" is 1.
Minimum quantity for "SAC Phase 2 Test Plan" is 1.