Steel Buildings

$37.50
Earthquake and Tsunami, Building Design, Pre-Disaster, Structural, Steel Buildings
The SAC/BD-97/02, Protocol for Fabrication, Inspection, Testing and Documentation of Beam-Column Connection Tests and Other Experimental Specimens , was...
In stock
+

Minimum quantity for "Protocol for Fabrication, Inspection, Testing and Documentation of Beam-Column Connection Tests and Other Experimental Specimens" is 1.


$85.00
Pre-Disaster, Steel Buildings, Structural, Earthquake and Tsunami, Building Design
The SAC-96-01 report, Experimental Investigations of Beam-Column Subassemblages, Part 1 and 2 , was funded by the Federal Emergency Management Agency...
In stock
+

Minimum quantity for "Experimental Investigations of Beam-Column Subassemblages, Part 1 and 2" is 1.


$60.00
Earthquake and Tsunami, Building Design, Steel Buildings, Pre-Disaster, Structural
The SAC/BD-00/21, Cyclic Testing of Bolted Moment End-Plate Connections , was funded by the Federal Emergency Management Agency (FEMA) and the California...
In stock
+

Minimum quantity for "Cyclic Testing of Bolted Moment End-Plate Connections" is 1.


$35.00
Pre-Disaster, Building Design, Earthquake and Tsunami, Steel Buildings, Structural
The SAC/BD-00/10, Loading Histories for Seismic Performance Testing of SMRF Components and Assemblies , was funded by the Federal Emergency Management...
In stock
+

Minimum quantity for "Loading Histories for Seismic Performance Testing of SMRF Components and Assemblies" is 1.


$55.00
Earthquake and Tsunami, Building Design, Pre-Disaster, Steel Buildings, Structural
The SAC/BD-00/17, Behavior and Design of Radius Cut Reduced Beam Section Connections , was funded by the Federal Emergency Management Agency (FEMA) and the...
In stock
+

Minimum quantity for "Behavior and Design of Radius Cut Reduced Beam Section Connections" is 1.


$35.00
Earthquake and Tsunami, Pre-Disaster, Building Design, Steel Buildings, Structural
The SAC/BD-97/04, Development of Ground Motion Time Histories for Phase 2 of the FEMA/SAC Steel Project , was funded by the Federal Emergency Management...
In stock
+

Minimum quantity for "Development of Ground Motion Time Histories for Phase 2 of the FEMA/SAC Steel Project" is 1.


$300.00
Earthquake and Tsunami, Building Design, Pre-Disaster, Structural, Steel Buildings
The SAC_CD01-03, SAC Steel Project, Background Documents , is a three-zip USB set contains the following 66 background documents, SAC/BD-96/01 through...
In stock
+

Minimum quantity for "SAC Steel Project, Background Documents" is 1.


$25.00
Structural, Steel Buildings, Pre-Disaster, Earthquake and Tsunami, Building Design
The SAC-95-01 report, Steel Moment-Frame Connection Advisory No. 3 , was funded by the Federal Emergency Management Agency (FEMA) and the California Office...
In stock
+

Minimum quantity for "Steel Moment-Frame Connection Advisory No. 3" is 1.


$40.00
Structural, Steel Buildings, Pre-Disaster, Earthquake and Tsunami, Building Design
The SAC-95-05 report, Parametric Analytical Investigations of Ground Motion and Structural Response, Northridge Earthquake of January 17, 1994 , was funded...

Minimum quantity for "Parametric Analytical Investigations of Ground Motion and Structural Response, Northridge Earthquake of January 17, 1994" is 1.


$48.00
Building Design, Earthquake and Tsunami, Pre-Disaster, Steel Buildings, Structural
The SAC-95-07 report, Case Studies of Steel Moment Frame Building Performance in the Northridge Earthquake of January 17, 1994,  was funded by the...
In stock
+

Minimum quantity for "Case Studies of Steel Moment Frame Building Performance in the Northridge Earthquake of January 17, 1994" is 1.


$25.00
Structural, Steel Buildings, Pre-Disaster, Earthquake and Tsunami, Building Design
The SAC-96-02 report, Connection Test Summaries (FEMA 289), was funded by the Federal Emergency Management Agency (FEMA) and the California Office of...
In stock
+

Minimum quantity for "FEMA 289, Connection Test Summaries" is 1.


$36.00
Structural, Steel Buildings, Pre-Disaster, Earthquake and Tsunami, Building Design
The SAC-99-01 report, Interim Guidelines Advisory No. 2 Supplement to FEMA-267 Interim Guidelines , is now available as FEMA 267B Report, superseding...
In stock
+

Minimum quantity for "FEMA 267B, Interim Guidelines Advisory No. 2 Supplement to FEMA-267 Interim Guidelines" is 1.


$40.00
Structural, Steel Buildings, Pre-Disaster, Earthquake and Tsunami, Building Design
The SAC/BD-00/01, Parametric Tests on Unreinforced Connections Volume I - Final Report , was funded by the Federal Emergency Management Agency (FEMA) and...
In stock
+

Minimum quantity for "Parametric Tests on Unreinforced Connections Volume I - Final Report" is 1.


$45.00
Structural, Steel Buildings, Pre-Disaster, Earthquake and Tsunami, Building Design
The SAC/BD-00/05, Bolted Flange Plate Connections , was funded by the Federal Emergency Management Agency (FEMA) and the California Office of Emergency...
In stock
+

Minimum quantity for "Bolted Flange Plate Connections" is 1.


$37.50
Pre-Disaster, Earthquake and Tsunami, Building Design, Steel Buildings, Structural
The SAC/BD-00/13, Preliminary Evaluation of Heat Affected Zone Toughness in Structural Shapes used in the Construction of Seismic Moment Frames , was...
In stock
+

Minimum quantity for "Preliminary Evaluation of Heat Affected Zone Toughness in Structural Shapes used in the Construction of Seismic Moment Frames" is 1.


$35.00
Structural, Steel Buildings, Pre-Disaster, Earthquake and Tsunami, Building Design
The SAC/BD-97/01, Through-Thickness Properties of Structural Steels , was funded by the Federal Emergency Management Agency (FEMA) and the California...
In stock
+

Minimum quantity for "Through-Thickness Properties of Structural Steels" is 1.


$60.00
Pre-Disaster, Earthquake and Tsunami, Building Design, Steel Buildings, Structural
The SAC/BD-99/06, Prediction of Seismic Demands for SMRFs with Ductile Connections and Elements , was funded by the Federal Emergency Management Agency...
In stock
+

Minimum quantity for "Prediction of Seismic Demands for SMRFs with Ductile Connections and Elements" is 1.


$40.00
Earthquake and Tsunami, Building Design, Pre-Disaster, Structural, Steel Buildings
The SAC/BD-99/17, Effects of Partially Restrained Connection Stiffness and Strength on Frame Seismic Performance , was funded by the Federal Emergency...
In stock
+

Minimum quantity for "Effects of Partially Restrained Connection Stiffness and Strength on Frame Seismic Performance" is 1.


$37.50
Earthquake and Tsunami, Building Design, Pre-Disaster, Structural, Steel Buildings
The SAC/BD-99/24, Weld Acceptance Criteria for Seismically-Loaded Welded Connection s , was funded by the Federal Emergency Management Agency (FEMA) and...
In stock
+

Minimum quantity for "Weld Acceptance Criteria for Seismically-Loaded Welded Connections" is 1.


$25.00
Structural, Steel Buildings, Pre-Disaster, Earthquake and Tsunami, Building Design
The ATC-41a (FEMA 350) report, Recommended Seismic Design Criteria for New Steel Moment-Frame Buildings , was funded by the Federal Emergency Management...
In stock
+

Minimum quantity for "FEMA 350, Recommended Seismic Design Criteria for New Steel Moment-Frame Buildings" is 1.


$25.00
Structural, Steel Buildings, Pre-Disaster, Earthquake and Tsunami, Building Design
The ATC-41b (FEMA 351) report, Recommended Seismic Evaluation and Upgrade Criteria for Existing Welded Steel Moment-Frame Buildings , was funded by the...
In stock
+

Minimum quantity for "FEMA 351, Recommended Seismic Evaluation and Upgrade Criteria for Existing Welded Steel Moment-Frame Buildings" is 1.


$25.00
Earthquake and Tsunami, Building Design, Pre-Disaster, Structural, Steel Buildings
The ATC-41c (FEMA 352) report, Recommended Postearthquake Evaluation and Repair Criteria for Welded Steel Moment-Frame Buildings , was funded by the...
In stock
+

Minimum quantity for "FEMA 352, Recommended Postearthquake Evaluation and Repair Criteria for Welded Steel Moment-Frame Buildings" is 1.


$25.00
Earthquake and Tsunami, Building Design, Pre-Disaster, Structural, Steel Buildings
The ATC-41d (FEMA 353) report, Recommended Specifications and Quality Assurance Guidelines for Steel Moment-Frame Construction for Seismic Applications ,...
In stock
+

Minimum quantity for "FEMA 353, Recommended Specifications and Quality Assurance Guidelines for Steel Moment-Frame Construction for Seismic Applications" is 1.


$25.00
Earthquake and Tsunami, Building Design, Pre-Disaster, Structural, Steel Buildings
The ATC-41e (FEMA 354) report, A Policy Guide to Steel Moment-Frame Construction , was funded by the Federal Emergency Management Agency (FEMA) and the...
In stock
+

Minimum quantity for "FEMA 354, A Policy Guide to Steel Moment-Frame Construction" is 1.