Buildings

$25.00
Earthquake and Tsunami, Building Design, Pre-Disaster, Structural, Research Reports
The ATC-24 report, Guidelines for Seismic Testing of Components of Steel Structures , was jointly funded by the American Iron and Steel Institute (AISI),...
In stock
+

Minimum quantity for "Guidelines for Seismic Testing of Components of Steel Structures" is 1.


$25.00
Earthquake and Tsunami, Building Evaluation, Safety Evaluation, Post-Disaster
The ATC-31 report, Evaluation of the Performance of Seismically Retrofitted Buildings, was developed under a contract from the National Institute of...
In stock
+

Minimum quantity for "Evaluation of the Performance of Seismically Retrofitted Buildings" is 1.


$30.00
Earthquake and Tsunami, Building Design, Pre-Disaster, Structural, Research Reports
The ATC-11 report, Seismic Resistance of Reinforced Concrete Shear Walls and Frame Joints: Implications of Recent Research for Design Engineers , was...
In stock
+

Minimum quantity for "Seismic Resistance of Reinforced Concrete Shear Walls and Frame Joints: Implications of Recent Research for Design Engineers" is 1.


$37.50
Building Design, Pre-Disaster, Earthquake and Tsunami, Steel Buildings, Structural
The SAC/BD-97/02, Protocol for Fabrication, Inspection, Testing and Documentation of Beam-Column Connection Tests and Other Experimental Specimens , was...
In stock
+

Minimum quantity for "Protocol for Fabrication, Inspection, Testing and Documentation of Beam-Column Connection Tests and Other Experimental Specimens" is 1.


$55.00
Earthquake and Tsunami, Building Design, Pre-Disaster, Structural, Steel Buildings
The ATC-41k (FEMA 355F) report, State of the Art Report on Performance Prediction and Evaluation of Steel Moment-Frame Structures , was funded by the...
In stock
+

Minimum quantity for "FEMA 355F, State of the Art Report on Performance Prediction and Evaluation of Steel Moment-Frame Structures" is 1.


$25.00
Earthquake and Tsunami, Bridge Design and Retrofit, Retrofit, Pre-Disaster
The ATC-33d (FEMA 356) report was developed under a cooperative agreement between the Federal Emergency Management Agency and the American Society of Civil...
In stock
+

Minimum quantity for "FEMA 356, Prestandard and Commentary for the Seismic Rehabilitation of Buildings" is 1.


$25.00
Structural, Research Reports, Pre-Disaster, Earthquake and Tsunami, Building Design

This report presents a comparison of seismic design criteria and practices embodied in U.S. and Chilean building codes in the period immediately preceding the 2010 Maule earthquake.

In stock
+

Minimum quantity for "Comparison of U.S. and Chilean Building Code Requirements and Seismic Design Practice 1985–2010" is 1.


$35.00
Earthquake and Tsunami, Pre-Disaster, Building Design, Steel Buildings, Structural
The SAC/BD-97/04, Development of Ground Motion Time Histories for Phase 2 of the FEMA/SAC Steel Project , was funded by the Federal Emergency Management...
In stock
+

Minimum quantity for "Development of Ground Motion Time Histories for Phase 2 of the FEMA/SAC Steel Project" is 1.


$25.00
Safety Evaluation, Post-Disaster, Building Design, Earthquake and Tsunami
Task Order 27 (ATC-101 Project) , A Framework to Update the Plan to Coordinate NEHRP Post-Earthquake Investigations . This report identifies a number...
In stock
+

Minimum quantity for "A Framework to Update the Plan to Coordinate NEHRP Post-Earthquake Investigations" is 1.


$35.00
Building Design, Earthquake and Tsunami, Pre-Disaster, Steel Buildings, Structural
The SAC/BD-99/11, The Impact of Earthquakes on Welded Steel Moment Frame Buildings: Experience in Past Earthquakes , was funded by the Federal Emergency...
In stock
+

Minimum quantity for "The Impact of Earthquakes on Welded Steel Moment Frame Buildings: Experience in Past Earthquakes" is 1.


$10.00
Earthquake and Tsunami, Building Design, Pre-Disaster, Structural, Structural - General, Technical Brief
The NEHRP Seismic Design Technical Brief No. 11: Seismic Design of Steel Buckling-Restrained Brace Frames, A Guide for Practicing Engineers , was produced...
In stock
+

Minimum quantity for "NEHRP Seismic Design Technical Brief No. 11: Seismic Design of Steel Buckling-Restrained Brace Frames, A Guide for Practicing Engineers" is 1.


$60.00
Building Design, Earthquake and Tsunami, Pre-Disaster, Structural
The ATC-3-06 report, Tentative Provisions for the Development of Seismic Regulations for Buildings , was funded by the National Science Foundation (NSF)...
In stock
+

Minimum quantity for "Tentative Provisions for the Development of Seismic Regulations for Buildings" is 1.


$25.00
Concrete Buildings, Building Design, Earthquake and Tsunami, Pre-Disaster, Structural

This report presents documentation of reinforced concrete wall failure modes and observed damage following the 2010 Maule, Chile earthquake and recommendations from studies evaluating critical issues in the design of reinforced concrete walls.

In stock
+

Minimum quantity for "Recommendations for Seismic Design of Reinforced Concrete Wall Buildings Based on Studies of the 2010 Maule, Chile Earthquake" is 1.


$25.00
Pre-Disaster, Earthquake and Tsunami, Structural, Building Design
**FREE FOR DOWNLOAD**  An electronic copy of this report is available from the  FEMA library . The ATC-64 (FEMA P-646A) report, Vertical...
In stock
+

Minimum quantity for "FEMA P-646A, Vertical Evacuation from Tsunamis: A Guide for Community Officials" is 1.


$55.00
Structural, Steel Buildings, Pre-Disaster, Earthquake and Tsunami, Building Design
The SAC/BD-00/04, Tests on Bolted Connections Part I: Technical Report , was funded by the Federal Emergency Management Agency (FEMA) and the California...
In stock
+

Minimum quantity for "Tests on Bolted Connections Part I: Technical Report" is 1.


$25.00
Earthquake and Tsunami, Building Design, Pre-Disaster, Structural, Structural - General
**FREE FOR DOWNLOAD**  An electronic copy of this report is available from the  FEMA library . The ATC-55 (FEMA 440) report, Improvement of...
In stock
+

Minimum quantity for "FEMA 440, Improvement of Nonlinear Static Seismic Analysis Procedures" is 1.


$80.00
Structural - General, Pre-Disaster, Earthquake and Tsunami, Building Design
The ATC-48 report, Built to Resist Earthquakes, The Path to Quality Seismic Design and Construction , was developed under a contract with the California...
In stock
+

Minimum quantity for "Built to Resist Earthquakes, The Path to Quality Seismic Design and Construction" is 1.


$40.00
Earthquake and Tsunami, Building Design, Pre-Disaster, Structural, Steel Buildings
The SAC-95-05 report, Parametric Analytical Investigations of Ground Motion and Structural Response, Northridge Earthquake of January 17, 1994 , was funded...

Minimum quantity for "Parametric Analytical Investigations of Ground Motion and Structural Response, Northridge Earthquake of January 17, 1994" is 1.


$40.00
Structural, Steel Buildings, Pre-Disaster, Earthquake and Tsunami, Building Design
The SAC/BD-98/01, Strength and Ductility of FR Welded-Bolted Connections , was funded by the Federal Emergency Management Agency (FEMA) and the California...
In stock
+

Minimum quantity for "Strength and Ductility of FR Welded-Bolted Connections" is 1.


$25.00
Pre-Disaster, Nonstructural, Building Design, Earthquake and Tsunami
The ATC-69-2 CD (FEMA E-74 CD) Report, Reducing the Risks of Nonstructural Earthquake Damage – A Practical Guide , was funded by the Federal Emergency...
In stock
+

Minimum quantity for "FEMA E-74, Reducing the Risks of Nonstructural Earthquake Damage – A Practical Guide" is 1.


$10.00
Earthquake and Tsunami, Bridge Design and Retrofit, Retrofit, Pre-Disaster
**FREE FOR DOWNLOAD**  An electronic copy of this report is available from the  FEMA library . The ATC-66 (FEMA P-774) Report, Unreinforced...
In stock
+

Minimum quantity for "FEMA P-774, Unreinforced Masonry Buildings and Earthquakes, Developing Successful Risk Reduction Programs" is 1.


$60.00
Earthquake and Tsunami, Building Design, Steel Buildings, Pre-Disaster, Structural
The SAC/BD-00/21, Cyclic Testing of Bolted Moment End-Plate Connections , was funded by the Federal Emergency Management Agency (FEMA) and the California...
In stock
+

Minimum quantity for "Cyclic Testing of Bolted Moment End-Plate Connections" is 1.


$40.00
Structural, Steel Buildings, Pre-Disaster, Earthquake and Tsunami, Building Design
The SAC/BD-99/05, Assessment of the Reliability of Available NDE Methods for Welded Joints and the Development of UT Procedures , was funded by the Federal...
In stock
+

Minimum quantity for "Assessment of the Reliability of Available NDE Methods for Welded Joints and the Development of UT Procedures" is 1.


$30.00
Earthquake and Tsunami, Building Design, Pre-Disaster
The ATC-3-4 report, Redesign of Three Multistory Buildings: A Comparison Using ATC-3-06 and 1982 Uniform Building Code Design Provisions , was published...
In stock
+

Minimum quantity for "Redesign of Three Multistory Buildings: A Comparison Using ATC-3-06 and 1982 UBC Design Provisions" is 1.