Minimum quantity for "Seismic Resistance of Reinforced Concrete Shear Walls and Frame Joints: Implications of Recent Research for Design Engineers" is 1.
This report presents a comparison of seismic design criteria and practices embodied in U.S. and Chilean building codes in the period immediately preceding the 2010 Maule earthquake.
Minimum quantity for "Comparison of U.S. and Chilean Building Code Requirements and Seismic Design Practice 1985–2010" is 1.
Minimum quantity for "Built to Resist Earthquakes, The Path to Quality Seismic Design and Construction" is 1.
Minimum quantity for "FEMA 355F, State of the Art Report on Performance Prediction and Evaluation of Steel Moment-Frame Structures" is 1.
Minimum quantity for "Development of Ground Motion Time Histories for Phase 2 of the FEMA/SAC Steel Project" is 1.
Minimum quantity for "The Impact of Earthquakes on Welded Steel Moment Frame Buildings: Experience in Past Earthquakes" is 1.
Minimum quantity for "NEHRP Seismic Design Technical Brief No. 11: Seismic Design of Steel Buckling-Restrained Brace Frames, A Guide for Practicing Engineers" is 1.
Minimum quantity for "Tests on Bolted Connections Part I: Technical Report" is 1.
Minimum quantity for "Tentative Provisions for the Development of Seismic Regulations for Buildings" is 1.
This report presents documentation of reinforced concrete wall failure modes and observed damage following the 2010 Maule, Chile earthquake and recommendations from studies evaluating critical issues in the design of reinforced concrete walls.
Minimum quantity for "Recommendations for Seismic Design of Reinforced Concrete Wall Buildings Based on Studies of the 2010 Maule, Chile Earthquake" is 1.
Minimum quantity for "Strength and Ductility of FR Welded-Bolted Connections" is 1.
Minimum quantity for "Parametric Analytical Investigations of Ground Motion and Structural Response, Northridge Earthquake of January 17, 1994" is 1.
Minimum quantity for "FEMA P-646A, Vertical Evacuation from Tsunamis: A Guide for Community Officials" is 1.
Minimum quantity for "FEMA 440, Improvement of Nonlinear Static Seismic Analysis Procedures" is 1.
Minimum quantity for "Cyclic Testing of Bolted Moment End-Plate Connections" is 1.
Minimum quantity for "Assessment of the Reliability of Available NDE Methods for Welded Joints and the Development of UT Procedures" is 1.
Minimum quantity for "Benchmarking of Analysis Programs for SMRF System Performance Studies" is 1.
Minimum quantity for "Bolted Flange Plate Connections" is 1.
Minimum quantity for "Tests on Bolted Connections Part II: Appendices" is 1.
Minimum quantity for "FEMA P-50-1, Seismic Retrofit Guidelines for Detached, Single-Family, Wood-Frame Dwellings" is 1.
Minimum quantity for "The Effects of Connection Fractures on Steel Moment Resisting Frame Seismic Demands and Safety" is 1.
Minimum quantity for "Survey of Computer Programs for the Analysis of Steel Moment Frame Structures" is 1.
Minimum quantity for "Cover-Plate and Flange-Plate Reinforced Steel Moment-Resisting Connections" is 1.
Minimum quantity for "Development and Evaluation of Improved Details for Ductile Welded Unreinforced Flange Connection" is 1.
Minimum quantity for "Simplified Seismic Assessment of Detached, Single-Family, Wood-Frame Dwellings" is 1.
Minimum quantity for "Seismic Rehabilitation Guidelines for Detached, Single-Family, Wood-Frame Dwellings" is 1.
Minimum quantity for "Selected Documents from the U.S.-Japan Workshop on Steel Fracture Issues" is 1.
Minimum quantity for "FEMA 350, Recommended Seismic Design Criteria for New Steel Moment-Frame Buildings" is 1.
Minimum quantity for "FEMA P-695, Quantification of Building Seismic Performance Factors" is 1.
Minimum quantity for "Round-Robin Testing of Ultrasonic Testing Technicians" is 1.
Minimum quantity for "Cyclic Response of RBS Moment Connections: Loading Sequence and Lateral Bracing Effects" is 1.
Minimum quantity for "Test of a Free Flange Connection with a Composite Floor Slab" is 1.
Minimum quantity for "Cyclic Testing of Narrow Plywood Shear Walls" is 1.
Minimum quantity for "NEHRP Workshop on Meeting the Challenges of Existing Buildings Prioritized Research for Reducing the Seismic Hazards of Existing Buildings" is 1.
Minimum quantity for "Effects of Hysteretic Deterioration Characteristics on Seismic Response of Moment Resisting Steel Structures" is 1.
Minimum quantity for "Seismic Performance of 3 and 9 Story Partially Restrained Moment Frame Buildings" is 1.
Minimum quantity for "Interim Guidelines: Evaluation, Repair, Modification and Design of Welded Steel Moment-Frame Structures" is 1.
Minimum quantity for "FEMA 352, Recommended Postearthquake Evaluation and Repair Criteria for Welded Steel Moment-Frame Buildings" is 1.
Minimum quantity for "Cyclic Tests on Simple Connections, Including Effects of the Slab" is 1.
Minimum quantity for "Loading Histories for Seismic Performance Testing of SMRF Components and Assemblies" is 1.
Minimum quantity for "FEMA 355B, State of the Art Report on Welding and Inspection" is 1.
Minimum quantity for "FEMA 355C, State of the Art Report on Systems Performance of Steel Moment Frames Subject to Earthquakes" is 1.
Minimum quantity for "Modeling and Acceptance Criteria for Seismic Design and Analysis of Tall Buildings" is 1.
Minimum quantity for "Cyclic Instability of Steel Moment Connections with Reduced Beam Sections" is 1.
Minimum quantity for "Study of the Material Properties of the Web-Flange Intersection of Rolled Shapes" is 1.
Minimum quantity for "FEMA 461, Interim Testing Protocols for Determining the Seismic Performance Characteristics of Structural and Nonstructural Components" is 1.
Minimum quantity for "Safer at Home in Earthquakes: A Proposed Earthquake Safety Program" is 1.
Minimum quantity for "FEMA 351, Recommended Seismic Evaluation and Upgrade Criteria for Existing Welded Steel Moment-Frame Buildings" is 1.