Minimum quantity for "The Effects of Connection Fractures on Steel Moment Resisting Frame Seismic Demands and Safety" is 1.
Minimum quantity for "Survey of Computer Programs for the Analysis of Steel Moment Frame Structures" is 1.
Minimum quantity for "Cover-Plate and Flange-Plate Reinforced Steel Moment-Resisting Connections" is 1.
Minimum quantity for "Development and Evaluation of Improved Details for Ductile Welded Unreinforced Flange Connection" is 1.
Minimum quantity for "Test of a Free Flange Connection with a Composite Floor Slab" is 1.
Minimum quantity for "Round-Robin Testing of Ultrasonic Testing Technicians" is 1.
Minimum quantity for "FEMA P-50-1, Seismic Retrofit Guidelines for Detached, Single-Family, Wood-Frame Dwellings" is 1.
Minimum quantity for "FEMA 350, Recommended Seismic Design Criteria for New Steel Moment-Frame Buildings" is 1.
Minimum quantity for "FEMA E-74, Reducing the Risks of Nonstructural Earthquake Damage – A Practical Guide" is 1.
Minimum quantity for "Selected Documents from the U.S.-Japan Workshop on Steel Fracture Issues" is 1.
Minimum quantity for "Cyclic Response of RBS Moment Connections: Loading Sequence and Lateral Bracing Effects" is 1.
Minimum quantity for "Redesign of Three Multistory Buildings: A Comparison Using ATC-3-06 and 1982 UBC Design Provisions" is 1.
Minimum quantity for "Simplified Seismic Assessment of Detached, Single-Family, Wood-Frame Dwellings" is 1.
Minimum quantity for "Effects of Hysteretic Deterioration Characteristics on Seismic Response of Moment Resisting Steel Structures" is 1.
Minimum quantity for "Seismic Rehabilitation Guidelines for Detached, Single-Family, Wood-Frame Dwellings" is 1.
Minimum quantity for "An Evaluation of the Imperial County Services Building Earthquake Response and Associated Damage" is 1.
Minimum quantity for "FEMA P-774, Unreinforced Masonry Buildings and Earthquakes, Developing Successful Risk Reduction Programs" is 1.
Minimum quantity for "Seismic Performance of 3 and 9 Story Partially Restrained Moment Frame Buildings" is 1.
Minimum quantity for "Study of the Material Properties of the Web-Flange Intersection of Rolled Shapes" is 1.
Minimum quantity for "FEMA 352, Recommended Postearthquake Evaluation and Repair Criteria for Welded Steel Moment-Frame Buildings" is 1.
Minimum quantity for "Loading Histories for Seismic Performance Testing of SMRF Components and Assemblies" is 1.
Minimum quantity for "Cyclic Testing of Narrow Plywood Shear Walls" is 1.
Minimum quantity for "Cyclic Tests on Simple Connections, Including Effects of the Slab" is 1.
Minimum quantity for "FEMA 355C, State of the Art Report on Systems Performance of Steel Moment Frames Subject to Earthquakes" is 1.
Minimum quantity for "FEMA 355B, State of the Art Report on Welding and Inspection" is 1.
Minimum quantity for "Interim Guidelines: Evaluation, Repair, Modification and Design of Welded Steel Moment-Frame Structures" is 1.
Minimum quantity for "FEMA P-695, Quantification of Building Seismic Performance Factors" is 1.
Minimum quantity for "FEMA 351, Recommended Seismic Evaluation and Upgrade Criteria for Existing Welded Steel Moment-Frame Buildings" is 1.
Minimum quantity for "Cyclic Instability of Steel Moment Connections with Reduced Beam Sections" is 1.
Minimum quantity for "Preliminary Evaluation of Heat Affected Zone Toughness in Structural Shapes used in the Construction of Seismic Moment Frames" is 1.
Minimum quantity for "Experimental Investigations of Beam-Column Subassemblages, Part 1 and 2" is 1.
Minimum quantity for "NEHRP Workshop on Meeting the Challenges of Existing Buildings Prioritized Research for Reducing the Seismic Hazards of Existing Buildings" is 1.
Minimum quantity for "Dynamic Tension Tests of Simulated Welded Beam Flange Connections" is 1.
Minimum quantity for "Inspection Technology Workshop" is 1.
Minimum quantity for "Simplified Loss Estimation for Pre-Northridge WSMF Buildings" is 1.
Minimum quantity for "Earthquake Aftershocks - Entering Damaged Buildings" is 1.
Minimum quantity for "Safer at Home in Earthquakes: A Proposed Earthquake Safety Program" is 1.
Minimum quantity for "FEMA 355A, State of the Art Report on Base Metals and Fracture" is 1.
Minimum quantity for "Effects of Strain Hardening and Strain Aging on the K-Region of Structural Shapes" is 1.
Minimum quantity for "FEMA 353, Recommended Specifications and Quality Assurance Guidelines for Steel Moment-Frame Construction for Seismic Applications" is 1.
Minimum quantity for "Failure Analysis of Welded Steel Moment-Resisting Frame Connections Parts I and II" is 1.
Minimum quantity for "FEMA 461, Interim Testing Protocols for Determining the Seismic Performance Characteristics of Structural and Nonstructural Components" is 1.
Minimum quantity for "Effects of Partially Restrained Connection Stiffness and Strength on Frame Seismic Performance" is 1.
Minimum quantity for "Modeling and Acceptance Criteria for Seismic Design and Analysis of Tall Buildings" is 1.
Minimum quantity for "Evaluation of the Effect of Welding Procedure on the Mechanical Properties of FCAW-S and SMAW Weld Metal used in the Construction of Seismic Moment Frames" is 1.
Minimum quantity for "Implementation Issues for Improved Seismic Design Criteria: Report on the Social, Economic, Policy and Political Issues Workshop" is 1.
Minimum quantity for "FEMA 237, Development of Guidelines for Seismic Rehabilitation of Buildings, Phase I" is 1.
Minimum quantity for "Characterization of the Material Properties of Rolled Sections" is 1.