Minimum quantity for "A Methodology for Seismic Design and Construction of Single-Family Dwellings" is 1.
Minimum quantity for "A Critical Review of Current Approaches to Earthquake Resistant Design" is 1.
Minimum quantity for "An Evaluation of a Response Spectrum Approach to Seismic Design of Buildings" is 1.
Minimum quantity for "An Evaluation of the Imperial County Services Building Earthquake Response and Associated Damage" is 1.
Minimum quantity for "Earthquake Damage Evaluation Data for California" is 1.
Minimum quantity for "Commentary on the Use of ATC-13 Earthquake Damage Evaluation Data for Probable Maximum Loss Studies of California Buildings" is 1.
Minimum quantity for "Comparison of Seismic Design Practices in the United States and Japan" is 1.
Minimum quantity for "Case Studies in Rapid Postearthquake Safety Evaluation of Buildings" is 1.
Minimum quantity for "FEMA 237, Development of Guidelines for Seismic Rehabilitation of Buildings, Phase I" is 1.
Minimum quantity for "Database on the Performance of Structures near Strong-Motion Recordings: 1994 Northridge Earthquake" is 1.
Minimum quantity for "Built to Resist Earthquakes, The Path to Quality Seismic Design and Construction" is 1.
Minimum quantity for "Assessment of the NIST 12-Million-Pound (53 MN) Large-Scale Testing Facility" is 1.
Minimum quantity for "FEMA 354, A Policy Guide to Steel Moment-Frame Construction" is 1.
Minimum quantity for "Characterization of Ground Motions During the Northridge Earthquake of January 17, 1994" is 1.
Minimum quantity for "Analytical and Field Investigations of Buildings Affected by the Northridge Earthquake of January 17, 1994" is 1.
Minimum quantity for "Case Studies of Steel Moment Frame Building Performance in the Northridge Earthquake of January 17, 1994" is 1.
Minimum quantity for "FEMA 288, Background Reports: Metallurgy, Fracture Mechanics, Welding, Moment Connections and Frame Systems Behavior" is 1.
Minimum quantity for "FEMA 289, Connection Test Summaries" is 1.
Minimum quantity for "Bolted Flange Plate Connections" is 1.
Minimum quantity for "Benchmarking of Analysis Programs for SMRF System Performance Studies" is 1.
Minimum quantity for "Behavior and Design of Radius Cut Reduced Beam Section Connections" is 1.
Minimum quantity for "Appendix to: Parametric Study on the Effect of Ground Motion Intensity and Dynamic Characteristics on Seismic Demands in Steel Moment Resisting Frames" is 1.
Minimum quantity for "Assessment of the Reliability of Available NDE Methods for Welded Joints and the Development of UT Procedures" is 1.
Minimum quantity for "Characterization of the Material Properties of Rolled Sections" is 1.
Minimum quantity for "Assessment of the Benefits of Implementing the New Seismic Design Criteria and Inspection Procedures" is 1.
Minimum quantity for "Collaborative Recommended Requirements for Automatic Natural Gas Shutoff Valves in Italy" is 1.
Minimum quantity for "Minimizing Floor Vibration" is 1.
Minimum quantity for "Cyclic Testing of Narrow Plywood Shear Walls" is 1.
Minimum quantity for "FEMA P-646, Guidelines for Design of Structures for Vertical Evacuation from Tsunamis (Second Edition)" is 1.
Minimum quantity for "FEMA P-646A, Vertical Evacuation from Tsunamis: A Guide for Community Officials" is 1.
Minimum quantity for "FEMA 389, Primer for Design Professionals: Communicating with Owners and Managers of New Buildings on Earthquake Risk" is 1.
Minimum quantity for "Applicability of Nonlinear Multiple-Degree-of-Freedom Modeling for Design" is 1.
Minimum quantity for "Earthquake Aftershocks - Entering Damaged Buildings" is 1.
Minimum quantity for "Field Manual: Postearthquake Safety Evaluation of Buildings (2nd Edition)" is 1.
Minimum quantity for "Guidelines for the Design of Horizontal Wood Diaphragms" is 1.
Minimum quantity for "Proceedings of Second U.S.-Japan Workshop on Improvement of Building Seismic Design and Construction Practices" is 1.
Minimum quantity for "Proceedings of Third U.S.-Japan Workshop on Improvement of Building Structural Design and Construction Practices" is 1.
Minimum quantity for "Proceedings of Fourth U.S.-Japan Workshop on Improvement of Building Structural Design and Construction Practices" is 1.
Minimum quantity for "Proceedings of Fifth U.S.-Japan Workshop on Improvement of Building Structural Design and Construction Practices" is 1.
Minimum quantity for "Proceedings of a Seminar and Workshop on Base Isolation and Passive Energy Dissipation" is 1.
Minimum quantity for "Proceedings of Seminar on Seismic Isolation, Passive Energy Dissipation and Active Control" is 1.
Minimum quantity for "Postearthquake Safety Evaluation of Buildings Training USB" is 1.
Minimum quantity for "Procedures for Postearthquake Safety Evaluation of Buildings & Addendum" is 1.
Minimum quantity for "General Acute Care Hospital Earthquake Survivability Inventory for California, Part A" is 1.
Minimum quantity for "General Acute Care Hospital Earthquake Survivability Inventory for California, Part B" is 1.
Minimum quantity for "Guidelines for Seismic Testing of Components of Steel Structures" is 1.
Minimum quantity for "Field Manual: Postearthquake Safety Evaluation of Postal Buildings (Interim)" is 1.
Minimum quantity for "Field Manual: Post Flood and Wind Storm Safety Evaluation of Postal Buildings (Interim)" is 1.