Minimum quantity for "FEMA P-58-4, Seismic Performance Assessment of Buildings, Volume 4 – Methodology for Assessing Environmental Impacts" is 1.
Minimum quantity for "FEMA P-58-5, Seismic Performance Assessment of Buildings, Volume 5 – Expected Seismic Performance of Code-Conforming Buildings" is 1.
Minimum quantity for "FEMA P-58-7, Building the Performance You Need, A Guide to State-of-the Art Tools for Seismic Design and Assessment" is 1.
Minimum quantity for "An Evaluation of a Response Spectrum Approach to Seismic Design of Buildings" is 1.
Minimum quantity for "Redesign of Three Multistory Buildings: A Comparison Using ATC-3-06 and 1982 UBC Design Provisions" is 1.
Minimum quantity for "A Methodology for Seismic Design and Construction of Single-Family Dwellings" is 1.
Minimum quantity for "Proceedings of a Workshop on Earthquake Resistance of Highway Bridges" is 1.
Minimum quantity for "Seismic Retrofitting Guidelines for Highway Bridges" is 1.
Minimum quantity for "An Investigation of the Correlation Between Earthquake Ground Motion and Building Performance" is 1.
Minimum quantity for "Critical Aspects of Earthquake Ground Motion and Building Damage Potential" is 1.
Minimum quantity for "Seismic Resistance of Reinforced Concrete Shear Walls and Frame Joints: Implications of Recent Research for Design Engineers" is 1.
Minimum quantity for "Comparison of United States and New Zealand Seismic Design Practices for Highway Bridges" is 1.
Minimum quantity for "Proceedings of 2nd Joint U.S.-New Zealand Workshop on Seismic Resistance of Highway Bridges" is 1.
Minimum quantity for "Comparison of Seismic Design Practices in the United States and Japan" is 1.
Minimum quantity for "Proceedings of Second U.S.-Japan Workshop on Improvement of Building Seismic Design and Construction Practices" is 1.
Minimum quantity for "Proceedings of Third U.S.-Japan Workshop on Improvement of Building Structural Design and Construction Practices" is 1.
Minimum quantity for "Proceedings of Fourth U.S.-Japan Workshop on Improvement of Building Structural Design and Construction Practices" is 1.
Minimum quantity for "Proceedings of Fifth U.S.-Japan Workshop on Improvement of Building Structural Design and Construction Practices" is 1.
Minimum quantity for "Proceedings of a Seminar and Workshop on Base Isolation and Passive Energy Dissipation" is 1.
Minimum quantity for "Proceedings of Seminar on Seismic Isolation, Passive Energy Dissipation and Active Control" is 1.
Minimum quantity for "General Acute Care Hospital Earthquake Survivability Inventory for California, Part A" is 1.
Minimum quantity for "General Acute Care Hospital Earthquake Survivability Inventory for California, Part B" is 1.
Minimum quantity for "FEMA 237, Development of Guidelines for Seismic Rehabilitation of Buildings, Phase I" is 1.
Minimum quantity for "Proceedings: Seminar on Seismic Design, Performance, and Retrofit of Nonstructural Components in Critical Facilities" is 1.
Minimum quantity for "Proceedings of Workshop for Utilization of Research on Engineering and Socioeconomic Aspects of the 1985 Chile and Mexico Earthquakes" is 1.
Minimum quantity for "Enhancing the Transfer of U.S. Geological Survey Research Results into Engineering Practice" is 1.
Minimum quantity for "Proceedings of Seminar on New Developments in Earthquake Ground Motion Estimation and Implications for Engineering Design Practice" is 1.
Minimum quantity for "Proceedings of National Earthquake Ground Motion Mapping Workshop" is 1.
Minimum quantity for "Proceedings of Workshop on Improved Characterization of Strong Ground Shaking for Seismic Design" is 1.
Minimum quantity for "Built to Resist Earthquakes, The Path to Quality Seismic Design and Construction" is 1.
Minimum quantity for "Assessment of the NIST 12-Million-Pound (53 MN) Large-Scale Testing Facility" is 1.
Minimum quantity for "The Missing Piece: Improving Seismic Design and Construction Practices" is 1.
Minimum quantity for "FEMA 274, NEHRP Commentary on the Guidelines for the Seismic Rehabilitation of Buildings" is 1.
Minimum quantity for "FEMA 350, Recommended Seismic Design Criteria for New Steel Moment-Frame Buildings" is 1.
Minimum quantity for "FEMA 351, Recommended Seismic Evaluation and Upgrade Criteria for Existing Welded Steel Moment-Frame Buildings" is 1.
Minimum quantity for "FEMA 352, Recommended Postearthquake Evaluation and Repair Criteria for Welded Steel Moment-Frame Buildings" is 1.
Minimum quantity for "FEMA 353, Recommended Specifications and Quality Assurance Guidelines for Steel Moment-Frame Construction for Seismic Applications" is 1.
Minimum quantity for "FEMA 354, A Policy Guide to Steel Moment-Frame Construction" is 1.
Minimum quantity for "FEMA 355A, State of the Art Report on Base Metals and Fracture" is 1.
Minimum quantity for "FEMA 355B, State of the Art Report on Welding and Inspection" is 1.
Minimum quantity for "FEMA 355C, State of the Art Report on Systems Performance of Steel Moment Frames Subject to Earthquakes" is 1.
Minimum quantity for "FEMA 355D, State of the Art Report on Connection Performance" is 1.
Minimum quantity for "FEMA 355E, State of the Art Report on Past Performance of Steel Moment-Frame Buildings in Earthquakes" is 1.
Minimum quantity for "FEMA 355F, State of the Art Report on Performance Prediction and Evaluation of Steel Moment-Frame Structures" is 1.
Minimum quantity for "FEMA 356, Prestandard and Commentary for the Seismic Rehabilitation of Buildings" is 1.
Minimum quantity for "FEMA 440, Improvement of Nonlinear Static Seismic Analysis Procedures" is 1.
Minimum quantity for "Interim Guidelines: Evaluation, Repair, Modification and Design of Welded Steel Moment-Frame Structures" is 1.
Minimum quantity for "Characterization of Ground Motions During the Northridge Earthquake of January 17, 1994" is 1.