Minimum quantity for "FEMA 355B, State of the Art Report on Welding and Inspection" is 1.
Minimum quantity for "FEMA 355C, State of the Art Report on Systems Performance of Steel Moment Frames Subject to Earthquakes" is 1.
Minimum quantity for "Cyclic Tests on Simple Connections, Including Effects of the Slab" is 1.
Minimum quantity for "Cyclic Testing of Narrow Plywood Shear Walls" is 1.
Minimum quantity for "Loading Histories for Seismic Performance Testing of SMRF Components and Assemblies" is 1.
Minimum quantity for "FEMA 352, Recommended Postearthquake Evaluation and Repair Criteria for Welded Steel Moment-Frame Buildings" is 1.
Minimum quantity for "Study of the Material Properties of the Web-Flange Intersection of Rolled Shapes" is 1.
Minimum quantity for "Seismic Performance of 3 and 9 Story Partially Restrained Moment Frame Buildings" is 1.
Minimum quantity for "Seismic Rehabilitation Guidelines for Detached, Single-Family, Wood-Frame Dwellings" is 1.
Minimum quantity for "Effects of Hysteretic Deterioration Characteristics on Seismic Response of Moment Resisting Steel Structures" is 1.
Minimum quantity for "Simplified Seismic Assessment of Detached, Single-Family, Wood-Frame Dwellings" is 1.
Minimum quantity for "Redesign of Three Multistory Buildings: A Comparison Using ATC-3-06 and 1982 UBC Design Provisions" is 1.
Minimum quantity for "Cyclic Response of RBS Moment Connections: Loading Sequence and Lateral Bracing Effects" is 1.
Minimum quantity for "Selected Documents from the U.S.-Japan Workshop on Steel Fracture Issues" is 1.
Minimum quantity for "FEMA E-74, Reducing the Risks of Nonstructural Earthquake Damage – A Practical Guide" is 1.
Minimum quantity for "FEMA 350, Recommended Seismic Design Criteria for New Steel Moment-Frame Buildings" is 1.
Minimum quantity for "FEMA P-50-1, Seismic Retrofit Guidelines for Detached, Single-Family, Wood-Frame Dwellings" is 1.
Minimum quantity for "Round-Robin Testing of Ultrasonic Testing Technicians" is 1.
Minimum quantity for "Test of a Free Flange Connection with a Composite Floor Slab" is 1.
Minimum quantity for "Development and Evaluation of Improved Details for Ductile Welded Unreinforced Flange Connection" is 1.
Minimum quantity for "Cover-Plate and Flange-Plate Reinforced Steel Moment-Resisting Connections" is 1.
Minimum quantity for "Survey of Computer Programs for the Analysis of Steel Moment Frame Structures" is 1.
Minimum quantity for "The Effects of Connection Fractures on Steel Moment Resisting Frame Seismic Demands and Safety" is 1.
Minimum quantity for "FEMA P-646A, Vertical Evacuation from Tsunamis: A Guide for Community Officials" is 1.
Minimum quantity for "FEMA 440, Improvement of Nonlinear Static Seismic Analysis Procedures" is 1.
Minimum quantity for "Tests on Bolted Connections Part II: Appendices" is 1.
Minimum quantity for "Bolted Flange Plate Connections" is 1.
Minimum quantity for "Assessment of the Reliability of Available NDE Methods for Welded Joints and the Development of UT Procedures" is 1.
Minimum quantity for "Benchmarking of Analysis Programs for SMRF System Performance Studies" is 1.
Minimum quantity for "Cyclic Testing of Bolted Moment End-Plate Connections" is 1.
Minimum quantity for "Tentative Provisions for the Development of Seismic Regulations for Buildings" is 1.
Minimum quantity for "Parametric Analytical Investigations of Ground Motion and Structural Response, Northridge Earthquake of January 17, 1994" is 1.
This report presents documentation of reinforced concrete wall failure modes and observed damage following the 2010 Maule, Chile earthquake and recommendations from studies evaluating critical issues in the design of reinforced concrete walls.
Minimum quantity for "Recommendations for Seismic Design of Reinforced Concrete Wall Buildings Based on Studies of the 2010 Maule, Chile Earthquake" is 1.
Minimum quantity for "Strength and Ductility of FR Welded-Bolted Connections" is 1.
Minimum quantity for "NEHRP Seismic Design Technical Brief No. 11: Seismic Design of Steel Buckling-Restrained Brace Frames, A Guide for Practicing Engineers" is 1.
Minimum quantity for "Tests on Bolted Connections Part I: Technical Report" is 1.
Minimum quantity for "The Impact of Earthquakes on Welded Steel Moment Frame Buildings: Experience in Past Earthquakes" is 1.
Minimum quantity for "Built to Resist Earthquakes, The Path to Quality Seismic Design and Construction" is 1.
This report presents a comparison of seismic design criteria and practices embodied in U.S. and Chilean building codes in the period immediately preceding the 2010 Maule earthquake.
Minimum quantity for "Comparison of U.S. and Chilean Building Code Requirements and Seismic Design Practice 1985–2010" is 1.
Minimum quantity for "FEMA 355F, State of the Art Report on Performance Prediction and Evaluation of Steel Moment-Frame Structures" is 1.
Minimum quantity for "Development of Ground Motion Time Histories for Phase 2 of the FEMA/SAC Steel Project" is 1.
Minimum quantity for "Guidelines for Seismic Testing of Components of Steel Structures" is 1.
Minimum quantity for "Seismic Resistance of Reinforced Concrete Shear Walls and Frame Joints: Implications of Recent Research for Design Engineers" is 1.
Minimum quantity for "Preliminary Evaluation of Methods for Defining Performance" is 1.
Minimum quantity for "Applicability of Nonlinear Multiple-Degree-of-Freedom Modeling for Design" is 1.
Minimum quantity for "Protocol for Fabrication, Inspection, Testing and Documentation of Beam-Column Connection Tests and Other Experimental Specimens" is 1.
Minimum quantity for "The Missing Piece: Improving Seismic Design and Construction Practices" is 1.
Minimum quantity for "Weld Acceptance Criteria for Seismically-Loaded Welded Connections" is 1.