Minimum quantity for "A Methodology for Seismic Design and Construction of Single-Family Dwellings" is 1.
Minimum quantity for "A Critical Review of Current Approaches to Earthquake Resistant Design" is 1.
Minimum quantity for "An Evaluation of a Response Spectrum Approach to Seismic Design of Buildings" is 1.
Minimum quantity for "Seismic Retrofitting Guidelines for Highway Bridges" is 1.
Minimum quantity for "An Evaluation of the Imperial County Services Building Earthquake Response and Associated Damage" is 1.
Minimum quantity for "An Investigation of the Correlation Between Earthquake Ground Motion and Building Performance" is 1.
Minimum quantity for "Critical Aspects of Earthquake Ground Motion and Building Damage Potential" is 1.
Minimum quantity for "Comparison of United States and New Zealand Seismic Design Practices for Highway Bridges" is 1.
Minimum quantity for "Earthquake Damage Evaluation Data for California" is 1.
Minimum quantity for "Commentary on the Use of ATC-13 Earthquake Damage Evaluation Data for Probable Maximum Loss Studies of California Buildings" is 1.
Minimum quantity for "Comparison of Seismic Design Practices in the United States and Japan" is 1.
Minimum quantity for "Case Studies in Rapid Postearthquake Safety Evaluation of Buildings" is 1.
Minimum quantity for "A Model Methodology for Assessment of Seismic Vulnerability and Impact of Disruption of Water Supply Systems" is 1.
Minimum quantity for "FEMA 237, Development of Guidelines for Seismic Rehabilitation of Buildings, Phase I" is 1.
Minimum quantity for "Enhancing the Transfer of U.S. Geological Survey Research Results into Engineering Practice" is 1.
Minimum quantity for "Database on the Performance of Structures near Strong-Motion Recordings: 1994 Northridge Earthquake" is 1.
Minimum quantity for "Built to Resist Earthquakes, The Path to Quality Seismic Design and Construction" is 1.
Minimum quantity for "Design Examples Recommended LRFD Guidelines for the Seismic Design of Highway Bridges" is 1.
Minimum quantity for "Assessment of the NIST 12-Million-Pound (53 MN) Large-Scale Testing Facility" is 1.
Minimum quantity for "FEMA 354, A Policy Guide to Steel Moment-Frame Construction" is 1.
Minimum quantity for "Characterization of Ground Motions During the Northridge Earthquake of January 17, 1994" is 1.
Minimum quantity for "Analytical and Field Investigations of Buildings Affected by the Northridge Earthquake of January 17, 1994" is 1.
Minimum quantity for "Case Studies of Steel Moment Frame Building Performance in the Northridge Earthquake of January 17, 1994" is 1.
Minimum quantity for "FEMA 288, Background Reports: Metallurgy, Fracture Mechanics, Welding, Moment Connections and Frame Systems Behavior" is 1.
Minimum quantity for "FEMA 289, Connection Test Summaries" is 1.
Minimum quantity for "Bolted Flange Plate Connections" is 1.
Minimum quantity for "Benchmarking of Analysis Programs for SMRF System Performance Studies" is 1.
Minimum quantity for "Behavior and Design of Radius Cut Reduced Beam Section Connections" is 1.
Minimum quantity for "Appendix to: Parametric Study on the Effect of Ground Motion Intensity and Dynamic Characteristics on Seismic Demands in Steel Moment Resisting Frames" is 1.
Minimum quantity for "Assessment of the Reliability of Available NDE Methods for Welded Joints and the Development of UT Procedures" is 1.
Minimum quantity for "Characterization of the Material Properties of Rolled Sections" is 1.
Minimum quantity for "Assessment of the Benefits of Implementing the New Seismic Design Criteria and Inspection Procedures" is 1.
Minimum quantity for "Collaborative Recommended Requirements for Automatic Natural Gas Shutoff Valves in Italy" is 1.
Minimum quantity for "Minimizing Floor Vibration" is 1.
Minimum quantity for "Cyclic Testing of Narrow Plywood Shear Walls" is 1.
Minimum quantity for "FEMA P-646, Guidelines for Design of Structures for Vertical Evacuation from Tsunamis (Second Edition)" is 1.
Minimum quantity for "FEMA P-646A, Vertical Evacuation from Tsunamis: A Guide for Community Officials" is 1.
Minimum quantity for "FEMA 389, Primer for Design Professionals: Communicating with Owners and Managers of New Buildings on Earthquake Risk" is 1.
Minimum quantity for "Applicability of Nonlinear Multiple-Degree-of-Freedom Modeling for Design" is 1.
Minimum quantity for "Earthquake Aftershocks - Entering Damaged Buildings" is 1.
Minimum quantity for "Field Manual: Postearthquake Safety Evaluation of Buildings (2nd Edition)" is 1.
Minimum quantity for "Proceedings of a Workshop on Earthquake Resistance of Highway Bridges" is 1.
Minimum quantity for "Guidelines for the Design of Horizontal Wood Diaphragms" is 1.
Minimum quantity for "Proceedings of 2nd Joint U.S.-New Zealand Workshop on Seismic Resistance of Highway Bridges" is 1.
Minimum quantity for "Proceedings of Second U.S.-Japan Workshop on Improvement of Building Seismic Design and Construction Practices" is 1.
Minimum quantity for "Proceedings of Third U.S.-Japan Workshop on Improvement of Building Structural Design and Construction Practices" is 1.
Minimum quantity for "Proceedings of Fourth U.S.-Japan Workshop on Improvement of Building Structural Design and Construction Practices" is 1.
Minimum quantity for "Proceedings of Fifth U.S.-Japan Workshop on Improvement of Building Structural Design and Construction Practices" is 1.
Minimum quantity for "Proceedings of a Seminar and Workshop on Base Isolation and Passive Energy Dissipation" is 1.
Minimum quantity for "Proceedings of Seminar on Seismic Isolation, Passive Energy Dissipation and Active Control" is 1.
Minimum quantity for "Postearthquake Safety Evaluation of Buildings Training USB" is 1.
Minimum quantity for "Procedures for Postearthquake Safety Evaluation of Buildings & Addendum" is 1.
Minimum quantity for "General Acute Care Hospital Earthquake Survivability Inventory for California, Part A" is 1.
Minimum quantity for "General Acute Care Hospital Earthquake Survivability Inventory for California, Part B" is 1.
Minimum quantity for "Guidelines for Seismic Testing of Components of Steel Structures" is 1.
Minimum quantity for "Field Manual: Postearthquake Safety Evaluation of Postal Buildings (Interim)" is 1.
Minimum quantity for "Field Manual: Post Flood and Wind Storm Safety Evaluation of Postal Buildings (Interim)" is 1.
Minimum quantity for "Proceedings of a Seminar and Workshop on Seismic Design and Performance of Equipment and Nonstructural Elements in Buildings and Industrial Structures" is 1.
Minimum quantity for "Proceedings of Seminar on Seismic Design, Retrofit, and Performance of Nonstructural Components" is 1.
Minimum quantity for "Proceedings: Seminar on Seismic Design, Performance, and Retrofit of Nonstructural Components in Critical Facilities" is 1.
Minimum quantity for "Proceedings of Seminar on Seismic Design, Performance, and Retrofit of Nonstructural Components in Critical Facilities" is 1.
Minimum quantity for "Proceedings of Workshop for Utilization of Research on Engineering and Socioeconomic Aspects of the 1985 Chile and Mexico Earthquakes" is 1.
Minimum quantity for "Evaluation of the Performance of Seismically Retrofitted Buildings" is 1.
Minimum quantity for "Improved Seismic Design Criteria for California Bridges: Provisional Recommendations" is 1.
Minimum quantity for "Improved Seismic Design Criteria for California Bridges: Resource Document" is 1.
Minimum quantity for "Improved Seismic Design Criteria for California Bridges: Resource Document -- USB" is 1.
Minimum quantity for "Proceedings of Seminar on New Developments in Earthquake Ground Motion Estimation and Implications for Engineering Design Practice" is 1.
Minimum quantity for "Proceedings of National Earthquake Ground Motion Mapping Workshop" is 1.
Minimum quantity for "Proceedings of Workshop on Improved Characterization of Strong Ground Shaking for Seismic Design" is 1.
Minimum quantity for "Evaluation and Repair of Earthquake Damaged Concrete and Masonry Wall Buildings" is 1.
Minimum quantity for "Liquefaction Study Report Recommended LRFD Guidelines for the Seismic Design of Highway Bridges" is 1.
Minimum quantity for "Guidelines for Using Strong-Motion Data and Shakemaps in Postearthquake Response" is 1.
Minimum quantity for "Liquefaction Maps" is 1.
Minimum quantity for "FEMA 274, NEHRP Commentary on the Guidelines for the Seismic Rehabilitation of Buildings" is 1.
Minimum quantity for "FEMA 276, Example Applications of the NEHRP Guidelines for the Seismic Rehabilitation of Buildings" is 1.
Minimum quantity for "FEMA 306, Evaluation of Earthquake-Damaged Concrete and Masonry Wall Buildings, Basic Procedures Manual" is 1.
Minimum quantity for "FEMA 307, Evaluation of Earthquake-Damaged Concrete and Masonry Wall Buildings, Technical Resources" is 1.
Minimum quantity for "FEMA 356, Prestandard and Commentary for the Seismic Rehabilitation of Buildings" is 1.
Minimum quantity for "FEMA 440, Improvement of Nonlinear Static Seismic Analysis Procedures" is 1.
Minimum quantity for "Experimental Investigations of Beam-Column Subassemblages, Part 1 and 2" is 1.
Minimum quantity for "Living with Unstable Ground" is 1.
Minimum quantity for "Next-Generation Performance-Based Seismic Design Guidelines" is 1.
Minimum quantity for "FEMA 461, Interim Testing Protocols for Determining the Seismic Performance Characteristics of Structural and Nonstructural Components" is 1.
Minimum quantity for "Evaluation of the FEMA P-695 Methodology for Quantification of Building Seismic Performance Factors" is 1.
Minimum quantity for "Natural Hazard Mitigation Saves: An Independent Study to Assess Future Savings from Mitigation Activities, Volume 1: Findings, Conclusions, and Recommendations" is 1.
Minimum quantity for "Natural Hazard Mitigation Saves: An Independent Study to Assess Future Savings from Mitigation Activities, Volume 2: Study Documentation" is 1.
Minimum quantity for "Modeling and Acceptance Criteria for Seismic Design and Analysis of Tall Buildings" is 1.
Minimum quantity for "Proceedings of Workshop on Tall Building Seismic Design and Analysis Issues" is 1.
Minimum quantity for "Seismic Design Guidelines for Highway Bridges" is 1.
Minimum quantity for "Seismic Vulnerability and Impact of Disruption of Lifelines in the Conterminous United States" is 1.
Minimum quantity for "Seismic Evaluation and Retrofit of Concrete Buildings" is 1.
Minimum quantity for "Recommended LRFD Guidelines for the Seismic Design of Highway Bridges" is 1.
Minimum quantity for "U.S.-Italy Collaborative Recommendations for Improved Seismic Safety of Hospitals in Italy" is 1.
Minimum quantity for "Recommended U.S.-Italy Collaborative Procedures for Earthquake Emergency Response Planning for Hospitals in Italy" is 1.
Minimum quantity for "Recommended U.S.-Italy Collaborative Guidelines for Bracing and Anchoring Nonstructural Components in Italian Hospitals" is 1.
Minimum quantity for "The Missing Piece: Improving Seismic Design and Construction Practices" is 1.